|
| 1 | Sch \"A\" Part-I (B/R) Work)Demolition of Matting, single or double any typeincluding, bamboo framing or bamboo supports, cover fillets, if any complete all as specified and directed. |
| 2 | M&L for brick work with sub class B bricks straight or curved on plan etc 6 mtr mean radius built in CM 1:4. complete all as specified and directed. |
| 3 | M&L for Brickwork with sub class ‘B’ bricks, straightor curved on plan to any radius inhalf brick thick walls built in CM 1:4. complete all as specified and directed. |
| 4 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tilescomplete all as specified and directed. |
| 5 | M&L for coloured non skid ceramictiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles including dismantling of old tiles complete all as specified and directed. |
| 6 | M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4including dismantling of old tiles complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick on fair face of brick worksor concretesurfaces of wallswith CM (1:6) and finished even and smoothwithout using extra cement complet all as specified and directed. |
| 8 | M&L for rendering 15mm thick on other than fair face of brick worksor concretesurfaces of wallswith CM (1:4) finished surface should be even and smooth including WPC @2% by weight of cement complete all as specfied and directed by Engr-in-Charge. |
| 9 | Dismantling timber scantlings 40 sq. cm in framed work and over in section, in any position complete all as specfied and directed by Engr-in-Charge. |
| 10 | All as per ser item No 9 (here -in-before) in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section |
| 11 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings coomplete all as specified. |
| 12 | S&F steel work in tubular trusses, vertical posts, purlins, rafters including special shaped washer etc. complete using mild steel sections or induction butt welded tubes conferming to IS 1161-1979 gde St.-240. |
| 13 | S&F Pre painted galvanised aluminium zinc coating GI based corrugated steel sheet 0.50 mm thickof an colour havingtensile strength of 550 Mpa as in roof covering/ cladding to wallfixed withselftapping screw complete all as specified and directed. |
| 14 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 15 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 16 | Material & Labour for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification on internal/ceiling surfaces including preparation of new plastered surface complete all as specified and directed. |
| 17 | M&L for rolled mild steel section as in main and cross beams, hip and jack rafters, purlins or similar works posts where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe 410-W Gde E-250) quality A complete all as specified and directed by the Engr-in-Charge. |
| 18 | S&F GI framework for seamless ceiling comprising of GI perimeterchannel 0.55 mm thk with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingswall usingnylonsleeves and secrewsat 450 mm centre to centre/intermediate channel0.9 mm thick having equalflanges of 15 mmeachand web of 45 mm suspendedfrom soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 mtr length ) of 0.55 mm having thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre complete all as specified and directed . |
| 19 | S&F in repair non asbestos fibre cement building board of thickness 4 mm fixed or laid / insertedto timber/GI / Aluminiumframework with screws including dismantling of old ceiling board any typecomplete all as specified and directed . |
| 20 | Demolition of cement concrete ( reinforced) of any description in any position not otherwise specially provide for complete all as specified and directed. |
| 21 | M&L RCC M 25 using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete etc . complete all as specified and as directed. |
| 22 | M&L RCC M 25 using 20 mm graded aggregate in Columns, pillars, piers,posts and struts work etc . complete all as specified and as directed. |
| 23 | Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beamsand similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed |
| 24 | Material and labourfor TMT bar 6 to 8mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-Charge. |
| 25 | Material and labourfor TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-Charge. |
| 26 | Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed. |
| 27 | Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each complete all as specified and directed. |
| 28 | S&F powder coated aluminium glazing/ doors & shutters made out of aluminium anodised section 101.60x44.75x1.75mm for chowkats or frame & shutters made of size 81.25x38.10x1.50mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick frosted glass above the mddle rail,and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including required nos. of pivots/hinges andbrass mortice lock (four lever) and two Nos keys complete all as specified and directed by Engr-in-Charge including supply and fixing the following items:(a) Stainless Steel 304 Grade Finished Butt Hinges 150mm -4 nos per leaf(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf(d) Alm door closer hydraulically regulated, designated No 3 universal type, upto 1 m width of shutter - 01 No per leaf |
| 29 | S&F factory made extruded aluminium windows with 50 micron powder coating doubled panelled anddouble shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters incl S&F factory made aluminium 50 micron powder coated grill, opening size 101.6X63.5 mm (4\"X2½\") andweightnot less than 1.345 Kg/sq.m complete fixed in all respect as specified including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO |
| 30 | S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed. |
| 31 | S&F vitreous china premium/1st quality wash down water closet wall hung EWC with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with matching colour flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mmand Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified. |
| 32 | S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware |
| 33 | S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hookincluding making connections and fixed in position complete in all respect as specified. |
| 34 | S&F Corner unbreakable glass shelf 10 mm thick set of three with SS brackets fixed to wall with rawl plug and SS boltscomplete all as specified and directed |
| 35 | Supply and fix, as in repair,vitreous china under counterwash basin, size 560 x 410 x180 mm, excluding taps, waste chain, plug and porcelain stopper, pillar tap (pillar tap measured and paid seprately)only fixing in counter complete all as specified.Make:PRAYAG / CERA/Hindware |
| 36 | S&F in repair 15mm dia centre hole basin mixer, chromium plated, fancy type complete all as specified and as directed by Engineer-in-charge. |
| 37 | M & Lfor 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 10 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed. |
| 38 | S&F in repairsfor brass chromium plated shower rose 125mm size with swivel joint including fixing to 15mm dia steel pipe or union. |
| 39 | M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connectinglegs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. |
| 40 | S&F for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm boreand fixed in repair complete all as specified and directed.Make:PRAYAG CAT PART No 8108/Equivalent to Jaguar/MARC |
| 41 | S&F Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. |
| 42 | S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 43 | S&F CP soap dish fixed to wall with plugs and screwscompleteall as directed and specified. |
| 44 | S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified |
| 45 | S&F in new or old position 32mm bore PVCwaste pipe for WHB or sinkcomplete as specified . |
| 46 | 8S&F sinks with drainage boardmade of stainless steel lmm thickkitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m complete all as specified and directed. |
| 47 | S & F PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified and directed. |
| 48 | S&F GI tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia including taking down old pipe complete all as specified and directed. |
| 49 | S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm diaincluding taking down old pipe complete all as specified and directed. |
| 50 | S&F in repairs 100mm dia stainless steel gratings complete all as specified. |
| 51 | S&F repairs for 20 mmstop valve, cast iron, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe fixed as in repair complete all as specified and directed.. |
| 52 | S&F fix in repairs tripple layer 1000 ltrs rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) white in colour hoisted and fixed in position including flot valvecomplete all as specified in SSR Part-I and directed by engr-in-charge. |
| 53 | S&F in repairs 110mm diaPVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including taking down of old pipe complete all as specified. |
| 54 | S&F in repairs 75 mm diaPVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including taking down of old pipe complete all as specified. |
| 55 | S & Fbend suitable for 110mm dia PVC (SWR) pipe including clamps complete all as specified and as directed |
| 56 | S & Fbend suitable for 75mm dia PVC (SWR) pipe including clamps complete all as specified and as directed |
| 57 | S&F in repair 110 mm dia PVC (SWR) \"P\" trap of any type complete all as specified and directed. |
| 58 | M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement including demolition of old cement concrete complete all as specifie and directed by Engr-in-Charge. |
| 59 | M&L 75 mm thick PCC1:4:8 type D2 for sub base complete all as specified and directed. |
| 60 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 61 | M&L for PCC1:4:8 type D2 Cement concrete in foundations,filling and mass concrete for sub base complete all as specified and directed. |
| 62 | M&L Machine pressed coloured precast conctete interlocking paver block with grey cement and with pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25mm thick sand cushioning complete all as specified. |
| 63 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed. |
| 64 | Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching, coping, plinth course, bands stops etc incl necessary form works complete all specified and directed by Engineer-in-Charges |
| 65 | S&F stainlesssteel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 66 | S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position in all respect all as specified and directed. |
| 67 | S&F pre-laminated PVC solid board as in frames for cupboard shutters 40 mm thick (double sandwiched of 20mm) 75 mm wide prelaminated on one side with wooden finished including taking down existing board any type complete fixed in position in all respect all as specified |
| 68 | S&F Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws complete all as specified and directed. |
| 69 | S&F Stainless Steel (304 Grade) Finished Handles 150 mm with stainless steel screws complete all as specified and directed. |
| 70 | S&FStainless Steel (304 Grade) Finished Square Tower Bolt 200mm long with stainless steel screws complete all as specified and directed. |
| 71 | S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified. |
| 72 | M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified. |
| 73 | M&L Sheet glass, ordinary quality and glazing with oil putty/wooden beading/framing in square/rectangleexc 0.5 sq. m and 5.5 mm thick in each pane complete all as specified. |
| 74 | Demolition of plain cement conc in any description as in ground floour complete all as specified and directed. |
| 75 | E/M Works Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed |
| 76 | Material and Labour for Modular concealed point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through with newPVC concealed/conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc complete all as specified and as directed(a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way |
| 77 | b).For one three pin socket outlet 5 Amps independent board complete |
| 78 | c) For one three pin 5 Amps socket outlet on the same board with other switches |
| 79 | All a per item No 76 (here-in-before)but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi conductor connecting to common earth dolly complete. |
| 80 | Supply and fixing ceiling rose 65X50 mmthree terminals complete all as specified. |
| 81 | Supply and fixing in replacement of Ding Dong bell AC 230 Volts complete all as specified and directed . |
| 82 | S & F Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge. |
| 83 | S & F Modular socket 6 Amp 2/3 pin combined 2 modulecomplete all as specified and directed by Engr-in-Charge. |
| 84 | S & F Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge |
| 85 | S & F Modular socket 6 /16 Amp 2/3 pin combined 2 modulecomplete all as specified and directed by Engr-in-Charge. |
| 86 | S & F Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 voltscomplete all as specified and dircted. |
| 87 | S&F Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge. |
| 88 | S & F in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn inexisting non metalic PVC rigid conduit medium grade of suitable size with all standared fitting ,including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cableshall be measured as one unit/ one running meter. |
| 89 | S & F in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn inand including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , concealed in walls , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note:- 1 Two runs of 6 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running meter.2. Rates quoted shall be deemed to include cutting chases for concealing condutand making good in cement cortar 91:4) or PCC (1:2:4) as required. |
| 90 | Supply and fixingin replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified. |
| 91 | Supply and fixing in replacement MCB single pole 6 to 32 Amps all as specified and directed. |
| 92 | Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed |
| 93 | S & F in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made3 phase 415 volts 6 way with 200 amps rating copper bus bar and PVC insulatedcopper wire of suitable size from the MCCB to the out going circuits oneincoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wireof suitable rating complete all as spcd and directed with the following accessories.(a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. |
| 94 | Supply and fix in replacement LED tube light 20 watt, (4\" long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed. |
| 95 | S&F in replacement ofSheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser). |
| 96 | Supply and fix,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3\" long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan all as specified and directed. Note: Making suitable opening for fixing air fan shall be deemed included in the quoted rate of item. |
| 97 | Supply and fix, Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3\" long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connectioncomplete all as specified and directed. Note: Making suitable opening for fixing exhaust fan shall be deemed included in the quoted rate of item. |
| 98 | Supply and fix in replacement LED decorative Gate ligh/Garden lights 20 watt light fitting with allaccessories includingmaking connections by using suitable size of PVC wire any type complete all as specified and as directed. |
| 99 | Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing notless than 4 Kg/Sqm. |
| 100 | Supply and fix Ceiling fans Sweep 1200 mm, (BLDC) BEE 5 Star rating High quality,Powerful Copper Motor, suitable for 230V single phase, 50Hz AC supplyincluding copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to fan complete all as specified and as directed. |
| 101 | Supply and fixing LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Devicebracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed. |
| 102 | Supply and fixin repalacement decorative Ceiling light 12 watt light fitting LED type with accessories including any type complete all as specified and as directed. |
| 103 | S & F LED light fitting 9/10 watt bulkhead luminaries including LED light driverholder connecting up with three core flexible copper conducter cable of suitable size comlete all as directed and specified |
| 104 | Supply laying & testing ofXLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminum conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointingwith suitable size aluminum lugsof size 50 sqmm x 3.5 core complete all as specified and as directed. |
| 105 | S&F in repairLED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed at site |
| 106 | Returning, filling in, including spreading , levelling , watering and well ramming in layers not exc 25cm of any soil. |
| 107 | Removing excavated materials(soils) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point. |
| 108 | Supply and spreading ofdry river bed sand for cushioning and covering the under ground cable in trenches all as specified and as directed(Note : Punned down thickness shall be measured) |
| 109 | M&L for well burnt sub class \"B\" bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick including taking out old complete all as specified. |
