|
| 1 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 2 | 1 run of cable |
| 3 | 2 run of cable |
| 4 | 3 run of cable |
| 5 | Supplying and fixing following size/ modules, G.I. box along with modular base & cover plate for modular switches in recess etc. as required. |
| 6 | 1 or 2 Module (75mm X 75 mm) |
| 7 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 9 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene.Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron). |
| 10 | Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar Transistor (IGBT)\"s both for the rectifier & inverter(3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge. |
| 11 | UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. . Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan f integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC Display /LED) to display : a) Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current. d) Battery: Voltage, Capacity. e) Load: KVA, KW, Percentage. f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power failuresTransfers to Bypass /Total Running time, etc. i) Mains Mode of Operation/Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc. |
| 12 | 20KVA (Each Power module shall be < 10 KVA) |
| 13 | SITC of Studio & Production Hardware, Production System with up to 8 NDI Inputs, 4 x independent IP video mix outputs, up to 2 x streaming video output, independently configurable 1 x Control Surface with T-Bar of Make Vizrt Tricster Mini 4K Bundle along with 03nos x Full HD PTZ Cameras of Make Lumens VC-A71P 4K plus, 1 Playout Automation with Graphics Engine of Make Rolad VR-6HD Direct Streaming AV Mixer and 1 x Professional Ingest for File Based or Real Time CaptureMake Lumens VS-LC200 Capture Vision Station and Lumens Remote Control Panel-EU complete with all acceroriesor equivalent. |
| 14 | SITC of Fusion 15 inch plastics frame head up. Flat screen, 400 NITS brightness, 4x3 LCD display. Mains/12v DC, Video PAL//NTSC, HDMI and VGA inputs with lightweight 15\" reflector and folding hood, 7 x rigging mount clamps, 2 sets each of 200mm, 300mm and 450mm bars, Camera, Monitor and Tripod plates for Make Portaprompt 15in Hi-Bright Fusion Kit plus 2 x Hood Bars, 10 metre HDMI cable with Portaprompt Wired (USB) Hand controller, prortaprompt Wired (RJ 45 ) Foot Controller, Portaprompt Wi-Fi foot controller. Suitable for ENG / EFP / PTZ lightweight studio tripod useand complete with all accerories Model Fusion-900-015 Make Protapropmt or equivalent. |
| 15 | SITC of Tripod For Teleprompter, suitable for adjustable height upto 04 feet with balance adjuster in each leg upto 25 mm and complete with all accerories Make Mnfrotto O55 video Tripod w/502 Video Fluid Heador equivalent. |
| 16 | SITC of Tripod For Camerasuitable for adjustable height upto 04 feet with balance adjuster in each leg upto 250 mm and complete with all accerories Make Neewer 78Carbon Fiber video TripodMax Load 18lb, LL55 or equivalent. |
| 17 | SITC of Lavalier Microphonefor Anchors and Guests of suitable specifications and noise cancellation and audio pickup till 300 mm,Make AKG D230 or equivalent |
| 18 | SITC of anchor Ear sets and complete with all accerories model no. CES-01Make Telex or equivalent. |
| 19 | SITC of 14 Channel Digital Mixing Console, 9\" Touchscreen & 8 + 1 Motorized Faders Input: 16 Mono + 1 Stereo + 2 FX Returns, Buses: 1 Stereo + 6 Mix, 2 FX, 2 Matrix 12 XLR + 4 XLR-1/4\" Inputs and 8 XLR Out, 16x16 Dante I/O and 18x18 USB I/O18 FX, GEQ on Mix 1-6 & Stereo Channels, 48/96 kHz Sampling Rate, QuickPro Presets, DAW Remote Mode + DM3 Editor, Wireless Remote Control via iPad Appand complete with Rode XLR Adaptor, AJA IO-X3 Mobile I/O complete withall accerories Make Yamaha DM3 Digital Mixing Console (Dante). |
| 20 | SITC of 1x4Headphone Distribution Amplifier Kit with On-Air Lightand complete with all accerories, MakePro AV/IT 4K UHG HDMI or equivalent. |
| 21 | SITC of2-Way Active Studio Monitors with volume control and complete with all accerories Make PreSonus Eris Studio 8 8 Inch or equivalent. |
| 22 | SITC of Desktop Digital Hybrid with 16-bit DSP processes the audio to eliminate cross-talk and provide a broadcast-quality signaland includes XLR and 3.5mm inputs for microphones and line-level signals, and both an XLR output for the caller and a stereo 3.5mm output for a mix of the host and caller complete with all accerories , model no. Broadcast HostMake JK Audio or equivalent. |
| 23 | SITC of Audio Voice Over Kit with Two ultra-low-noise mic preamps with front-panel line/instrument inputs Auto Gain and Clip Safe modes SH-450 headphones, CM25 MkIII condenser microphone, Includes Hitmaker Expansion software bundle Plus Pro Tools Intro +, Ableton Live lite, and 6 months of FL Studio Producer Edition model no. Scarlett 2i2 Studio 4th GenMake Focusriteand complete with all accerories or equivalent. |
| 24 | SITC of 160 TB RAW Storage Direct 10G Connect model no. WDMake G RAID SHUTTLE 8 and complete with all accerories or equivalent |
| 25 | SITC of H.265 video uplink system, 6 Nos. 4G Modules(internal)2 LAN ports;1 USB port+ inbuilt Wi-Fi, 1* SDI cable, 1* HDMI cable, Internal Battery, Power Supply, Power Cable Custom Back Pack, user manual- soft copy including LiveU Linux Server Software for single Server. Limited to one server (upto 4 SDI concurrent outputs). This is a perpetual license- usable only by the entity purchasing this and complete with all accerories model no. Lu600cMake Live U or equivalent. |
| 26 | SITC of Shotgun Micand complete with all accerories model no. MKE 600 Make Sennheiser or equivalent |
| 27 | SITC of 28-Port Gigabit Smart Managed Switch model no. DGS-1210-28 Make D-Link and complete with all accerories or equivalent |
| 28 | SITC of Sony BRAVIA 5 165 cm (65 inches) 4K Ultra HD Mini LED Smart Google TVwith ops comprising of minimum 15Gen with i7 processorHDR10, Dolby Vision, HLG, Dolby Audio & Dolby Atmos model no.K-65XR55A and complete with all accerories Make Sonyor equivalent. |
| 29 | SITC of IKAN LCX21 Lyra 1 RGBW Studio, Swit CL-M100D Studio Light, Aputure Light Dome SE and Aputure Storm 400x- EU plug Light for Camera Setupand complete with all accerories. |
| 30 | Painting on wall surface with chroma key paintof green shade Two or more coat applied on approx 260 sqft area of approved brand complete as required. Make Rosco |
| 31 | SITC of 2 RU Server For Cinegy One Intel Xeon Processor 6505P, 48M Cache, 3.9 GHz minumum 16GBslot 3x16GB DDR5 2999MHz RDIMM ECC Memory 2 x 480GB SATA Enterprise Class Solid State Drive, Hot- plug (RAID 1) 3 x 4TB SATA Enterprise Solid State Drive, Hot-plug (RAID 8) NVIDIA GeForce RTX 40 Series 8 GB, 4 DP Dual 1 GBE On Baord NIC Hot-plug, Redundant Power Supply (1+1) Windows 10 Pro for Workstations (4 Cores Plus) Multi - English 3 Years Warranty. includingall accessories. |
| 32 | Supplying and fisxing of 1 module RJ 45 computer socket i/c CAT6 an existing box/ cover plate and making of connection etc. complete as required. Make- Wipro North west Cat No-R5200 or eqivalent model of Lerand/ Schnieider. |
| 33 | Providing and fixing of Wood Polymer Composite Acoustic perforated tile westo of size 595x595x12 mm square edged white colour made up of extruded WPC (Wood Polymer Composite) comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. The panels shall have a special perforation of 6 mm dia front side & 10 mm dia on rever side. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece of fabric felt sheet of 3 mm manufactured from 100% recycle fabric of density 330 GSM, The tiles shall havesuspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.30 mm thickness (galvanized @120 gsm) comprising main T runners of 24x32 mm of length 3000 mm, cross T of size 24x32mm of length 1200 mm and secondary intermediate cross T of size 24x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. Makes -ANUTONE, ECOTONE, BOLLARD, EARCONS, CREDENCE. |
| 34 | Providing and fixing in position wall paneling of Credence Wood Polymer Composite Acoustic panels westo of size 1200x1200x20 mm made up of extruded WPC (Wood Polymer Composite) comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and having minimum density of up to 550 kg/m3, minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. The panels shall have a special perforation of 6 mm dia front side at 15.5 mm centre to centre and 10 mm dia on rever side. The edges of the panels shall be tapered.The back of the perforated panel shall have sound absorbing non-woven acoustical fleece of 3 mm felt fabric,Panel is to be fixed on framework with screw fixed on comprising a GI framework for acoustic wall paneling as per design drawing (made from especially fabricated galvanized iron sheets 0.5 mm thick pressed section galvanizing @ 120 grams per sqm including both sides) consisting of floor channel of size 50X32X32X0.5 mm thick bottom and top fixed with nylon sleeves and screw. Further vertical GI studs of size 48X34X36X0.5 mm thick are placed at 600 mm center to center vertically on the wall using 12 mm dia 50 mm long wedged type expanded zinc alloy dash fastener with 10 mm bolt, to avoid any undulations on the wall. fill the gap between wall & panel by 50 mm thick polyester wadding having density of 1000 GSM. Continue the process till the actual height is achieved. The installed panels should give an NRC minimum of 0.9. Approved Makes -ANUTONE, ECOTONE, BOLLARD, EARCONS, CREDENCE |
| 35 | Fabricating and fixing credence make 50 mm thick acoustic sound reducing doors comprise of two nos. 12mm thick commercial ply boards comprising of 50mm thick 48kg/m3 rockwool insulation compressed to 20mm with facing of 3mm thick straight grained teak veneer on both sides of the shutter as final finishing. The internal framework of the door shall comprise of hardwood frame of section 70x45mm. The internal framework shall have 3mm thick rubber sheet interlayer at all the 4 corner joints for maximum sound absorption. Cost excludes Sal wood Chowkhat (section size: 5\" x 3\") and melamine polish over veneer ply.all hardware as hinges, door closure, door handle & panic bar to be paid extra. Makes -ANUTONE, ECOTONE, BOLLARD, EARCONS, CREDENCE. |
| 36 | Providing and fixing floating floor consisting 10 mm thick EPDM cushioned pine wooden framing of size 600x600 mm, the pine wooden batten of size 45×45 mm shall be uniformly varnished with two coats of wood varnish, rockwool infilled of 50 mm thick of density 48kg/m3. A densified ply of thickness 12 mm then to fixed over the framework of required size. loop pile carpet 100 % bright nylon of pile weight 16 oz. to 18 oz. with precision tufted loop piles of gauge 1/10, with primary baking of woven polypropylene & secondary backing of synthetic jute, pile height of 5 mm. underlay of 6mm thick PU foam fixed to existing leveled floor with synthetic adhesives as approved by the manufacturer. Makes -ANUTONE, ECOTONE, BOLLARD, EARCONS, CREDENCE. |
| 37 | Conducting of survey, preparing of all reports, design and drawings of Audio Visual system. This includes preparing of all drawings in hard and soft copy both as per latest CPWD specifications, IS code, National Building Codes, including taking of approval of client at every stage complete as required. |
| 38 | CAMC for a period of 5 years after DLP (Defect liability /Warranty period) with operation team after completion of above work comprising of 01 no. of Camera operator/ Audio operator and 01 no. Video editor etc. on daily basis during office hours as per requirments for successful functioning of broadcasting studio as per required at site. (Total 6 years) The above may be extended upto further 2 years on the basis of performance during last 5 years. |
