|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Extra for additional lift above 1.5 mtr |
| 3 | Dumping of stones includng cost of stones in soakage pit without filling interstices with decreasing grains size towards top etc inluding all cost and carriage complete job |
| 4 | P/F of pre-cast concrete circular rings 3 feet dia with lid complete job including all costs and carriage complete. |
| 5 | A) Rings |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level(1:2:4) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level . 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more() |
| 8 | Constructing brick masonry manhole and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) M.S iron cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 15 kg (weight of cover 7 kg and weight of frame 8 kg ) top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design including red oxide steel priming of steel frame and cover complete : |
| 9 | a) 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line- |
| 10 | b) 20.24.3 Inside dimensions 600x850 mm and 45 cm deep for single pipe line with three or more inlets. |
| 11 | Providing and laying of 110 mm uPVC pipe of standard make, approved brand, ISI mark incl. sockets,plain bends, chemical solvent all carriages complete |
| 12 | Providing and laying of 75 mm uPVC pipe of standard make, approved brand, ISI mark incl. sockets,Plain bend , chemical solvent all carriages complete |
| 13 | Carriage of materials by MT from nearest sorce and headload if any |
| 14 | Sand/Stone Aggregates with an avg lead of 25 Km and HL 100 mtrs |
| 15 | Stone/Stone soling with an avg lead of 25 Km and HL 100 mtrs |
| 16 | P/F signboard (2\"x2\") on M.S sheet with frame of( 32x32x3 mm )fixed in welding to CCPT and taking of photographs of size 125mm x200mm pre- execution, during execution and post completion( 3 Copies each). Please Enable Macros to View BoQ information |
