|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugatedprofile steel sheet 0.50mm thick of any colourhaving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colourhaving tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws,complete all as specified and directed. |
| 4 | Dismantiling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed. |
| 6 | Frame work such as grills, gateand intricated design, including MS angle, MS channel, flat iron, round bars, Sheet etc with ends of bars shouldered and or riveted or forged into spikes including welding as directed and fixing with screwes, bolts etc includinguding dismantiling of existing gate/grill complete confoRMing to Fe 290, Gde E-165 complete all as specified and directed. |
| 7 | M&Lapplying two coats of synthetic enamel paintover one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width complete all as specified and directed. |
| 8 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,complete all as specified and directed. |
| 9 | S&F Anodised aluminium snap grid frame work for false ceiling of size 605x605mm complete all as specified and directed. |
| 10 | Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid 8mm thick (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 11 | S&F 15mm thick 2nd class soft wood boarding as in wall panelling, plain one side and edges tonged and grooved or rebated,fixed with nails in any situation complete all as specified and directed. |
| 12 | S&F 15mm thick 2nd class soft wood clean sawn boarding as in eves board fixed with nails in any situation complete all as specified and directed. |
| 13 | Dismantiling of unframed work timber fillets, rails, posts, rafters, purlines, etc under 40 sqcm in section complete all as specified and directed. |
| 14 | S&F 2nd class soft wood as in plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of area exceeding 13 sqcm and not exceeding 25 sqcm complete all as specified and directed. |
| 15 | S&FAnodised aluminium frame (Powder coated minimum thickness of powder coating 50 micron)for doors, window, partition wall with one or more rebates including joining cleat for fixing, rubber packing, anodised aluminum snap on beading for fixing glass panes in frame etc complete all as specified and directed. |
| 16 | S&F Anodised aluminium (Powder coated minimum thickness of powder coating 50 micron)door shutter, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 nos in Each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 17 | S&F anodised aluminium (Powder coated minimum thickness of powder coating 50 micron)window, ventilator shuttersfixed type with out sash bar, aluminium sction weighting 0.55 kg per Sqm including necessary jointing cleats, glazing, clips, rubber packing, anodised aluminum snap, beading, screws etc, complete all as specified and directed. |
| 18 | S&F brass mortice lock vertical type 100mm size 4 levers complete all as specified and directed. |
| 19 | M&L 12mm thick prelaminated particle board, interior grade, prelaminated on both side with decorative choice lamination and fixed with screws to aluminum frame work, complete all as specified and directed. |
| 20 | S&F 4mm thick, plain sheet glass, selected quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 21 | S&F Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 22 | S&F door closer hydraulically regulated of cast iron body designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed complete all as specified and directed. |
| 23 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 24 | Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) includinguding disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and directed. |
| 25 | M&L 25mm thick Plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate), surface finished fair to receive top layer of flooring, complete all as specified and directed. |
| 26 | M&LNon - skid Ceramic coloured tiles not less than 8mm thick area of Each tile exceeding 0.18Sqm but not exceeding 0.38Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to over and including 15mm thick scred bed or bedding layer of CM 1:6 complete all as specified and directed. |
| 27 | M&LNon - skid Ceramic coloured tiles not less than 8mm thick area of Each tile exceeding 0.18Sqm but not exceeding 0.38 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick rendering in CM(1:6) complete all as specified and directed. |
| 28 | M&L Non - skid Ceramic coloured tiles not less than 8 mm thick (square/ rectangular) area of Eachtile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including15mm thick screed bed or bedding layer in cement mortar1:6, complete all as specified and directed. |
| 29 | M&L Glazed ceramic tiles, coloured, of size350mm x 250mm/450 mm x 300mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortar 1:4, complete all as specified and directed. |
| 30 | S&F in repairs Vitreous China, wash hand basin, flat back white of size 550mm x 400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, 32mm dia PVC waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 31 | S&F in repair vitreous china wash down water closet pan (Pedestal patern) white with P or S trap including plastic seat cover, black , closed pattern with flat bottom, and cover and mild steel chromium plated and PVC wasted pipe complete all as specified and directed. |
| 32 | S&F in repairs low level 10 ltrs capacity PVC valveless syphonic action type flusing cistern including flush pipe fixed with inlet valve, float, brackets,PVC connection complete all as specified and directed. |
| 33 | Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 34 | M&L 25mm outer dia 3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having theRMal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 35 | Taking up or down 20mm bore steel tubing and connection includinguding cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 36 | M&L 32mm outer dia 3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having theRMal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 37 | Lagging to 20 to 32mmdia pipe used in internal water supply or plumbing all around with, 25 min thick bonded mineral wool perfoRMed \"SNAPON\" pipe section density 144 Kg/Cum conf to IS-9842 includinguding chicken mesh wire neeting 25 gauge, 20mm mesh complete all as specified and directed. |
| 38 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar1:3 to ends or edges of shelves , for water tubing etc andmaking good, cutting exceeding 10cm girth but not exceeding 20cm girth in stone walls, complete all as specified and directed. |
| 39 | Dismantiling of water tanks of capacity exceeding 250 & not exceeding 500 ltrs including all necessary fittings complete all as specified and directed. |
| 40 | S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks tripple layer made (cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR part-I, complete all as specified and directed. |
| 41 | S&F 32mm dia PP-Rgate valves (Brass inserted) as per requirment of the site complete all as specified and directed. |
| 42 | S&F 15mm dia PP-R ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as per requirement of the site complete all as specified and directed. |
| 43 | S&F 600x450mm bevelled edged looking mirror 2mm thick of selected quality glass, mounted on 4 mm thick PVC sheet and with aluminium frame work fitted with chromium plated brass screws and cup washers including taking old one, complete all as specified and directed. |
| 44 | S&F in repair 15mm dia Bib taps cast copper alloy with fancy type chromium lated crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule complete all as specified and directed. |
| 45 | S&F in repairs Brass CP wall/basin mixer, 15mm bore, for mixing hot and cold water screwed down for iron pipecomplete all as specified and directed. |
| 46 | S&F in repairs 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cupscrewed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 47 | S&F in repairs Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 48 | S&F in repairsChromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 49 | S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality complete all as specified and directed. |
| 50 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 51 | S&F in repairs tubular towel rail aluminum anodised 20mm dia, D type, 60 cm long with brackets complete all as specified and directed. |
| 52 | S&F in repairs harrison rail/curtain rails , mild steel chromium plated with fixing brackets , stops, rollers etc complete all as specified and directed. |
| 53 | S&F in repairs Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, (exceeding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe,complete all as specified and directed. |
| 54 | S&F repairs Toilet paper holder, vitreous china, box type , coloured complete all as specified and directed. |
| 55 | S&F in repairsSoap dish of appropriate size vitreous China white, any type, fixedto plugs with chromium plated brass screws complete all as specified and directed. |
| 56 | Taking down chowkats or frames with shutters (without taking of shutter from the frame)of any description alongwith fittings not exceeding 1.5Sqm Each, complete all as specified and directed. |
| 57 | Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exceeding 1.5Sqm not exceeding 4 Sqm Each, complete all as specified and directed. |
| 58 | S&FPVC Door frames of size 50 mm x 47 mm made of 5 mm single side pr-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specifications and drawing, complete all as specified and directed. |
| 59 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing, complete all as specified and directed. |
| 60 | S&F aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed. |
| 61 | S&F Butt hinges, medium weight cold rolled 75mm size ISI marked, complete all as specified and directed. |
| 62 | S&F Extruded aluminium alloy handles fabricated type anodised 100mm size, complete all as specified and directed. |
| 63 | Dismantling Stone Slabs and tiles of any decription or thickness in floors, apron etclaid bedded and pointed in any mortar, complete all as specified and directed. |
| 64 | M&L 20mm Granie (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platfoRMs, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including15mm thick rendering in CM(1:6) complete all as specified and directed. |
| 65 | Rounding/mouldingto edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platfo RM, and other similar situations etc complete all as specified and directed. |
| 66 | Demolition of brick or stone masonary built in cement mortarincluding all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 67 | M&L brick work with sub-class \"B\" bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 68 | M&L Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed. |
| 69 | Description all as per item No 68 but except stone complete all as specified and directed. |
| 70 | M&L Raised pointing to random or polygonal rubble, un-coursed or brought upto courses and raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed. |
| 71 | Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 72 | M&L 15mm thick rendering on wall in CM 1:6 onbrick/concrete surfaceand finishing the surface even and smooth with out using extra cement, complete all as specified and directed. |
| 73 | M&L 15mm thick rendering on wall in CM 1:4 onbrick/concrete surfaceand finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 74 | M&L 15mm thick rendering on wall in CM 1:4 on stone masonry and finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 75 | M&Lpreparation of new plastered surfaces of walls and applying two coats of oil bound distemper over 3mm thick wall care puttycomplete all as specified and directed. |
| 76 | M&Lpreparingnewplasteredsurfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and includinguding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm oversurfaces complete all as specified and directed. |
| 77 | Notes :-An amount of Rs. 63610.00 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
