|
| 1 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) P.W.D (Bldg.), .Page -268, Item no - 19 |
| 2 | Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor [Ref : P.W.D.(Bldg.), Page-15 , Item- No 7(b), 3rd corri and addenda] |
| 3 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. [Ref: P.W.D (Bldg.), Page -26, Item.- 10(i)] Annexure - II |
| 4 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge [Ref: P.W.D (Bldg.), Page -42, Item.- 36(a)] |
| 5 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete (ii) With 1:4 cement mortar (a) 20 mm thick plaster P.W.D (Bldg.), 3rd Corri & Addenda.Page -50, Item NO.1(ii)(a,b) |
| 6 | Neat cement punning about 1.5 mm. Thick in wal, dado, window, sills, floor, drain etc. [Ref : P.W.D.(Bldg.), Page-192, Item No. 15] |
| 7 | Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (ii) 150 mm diameter Ref : P.W.D. (Rds) Page -324, it no.-18.18 |
| 8 | Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.ii) 125mm diameter. Ref : P.W.D. (Rds) Page -324, it no.-18.17 |
| 9 | Labour for fitting and fixing 10cm to 13cm. Diameter Sal-bullah/Eucaypytus bullah as ties and runners including necessary nails. Bolts and nuts. Ref : P.W.D. (Rds) Page -328, it no.-18.41 |
| 10 | Coal tarring on wooden surfaces including cost of materials. (a) Double Coat Ref : P.W.D. (Rds) Page -325, it no.-18.27,a |
| 11 | Supplying empty cement Bag in good condition Ref : P.W.D. (Rds) Page -325, it no.-18.28 |
| 12 | Fillng empty cement bags with dry earth or sand,stiching the bag (cost of thread included) and carying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags. Ref : P.W.D. (Rds) Page -325, it no.-18.29 |
| 13 | Supply of Silver sand Ref : P.W.D. (Bldg) Page -300, it no.-6,d |
| 14 | Add 18% GST |
| 15 | Add 1% Cess Please Enable Macros to View BoQ information |