Tender For Repairing Of Maji Than At Sidabari-Dumantling all types of masonry excepting cement concrete plain or Freinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof. Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) ground floor including roof. Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 175 m. a) in ground floor including roof. Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. (OUT OUT With carried earth arranged by the contractor within a radius of 3 km. including cost of carried learth Plain cement concrete with graded stone chips(20mm) excluding shuttering with (mix1:2:4) Total Qty ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinfforcement, if any, in ground floor Las per releevent is code clouam footing JUNTAL roof slab Total Qty Shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood plank of approved thickness with required bracing including fitting fixing and striking out after compleating of works (upto roof (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer An-Charge for Roof HOOR SIDE Total Qty werment for reinforced conncrete works in all sorts of struuctures Including distribution bars, stirrups, binders etc. Initial straightening and removal of loose rust (if necessary), cutting to requsite length, hooking and binding with 16 guage black annealed wire at every intersection, complete as per drawing and direction. LINTAL roof LINTAL RING TOTAL Brick work with 1st class bricks in cement mortar (1:6) b)in super structure DOOR ABOVE LINTAL PARAPET WALL 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. Prarpet wall Plaster (to wall, floor, ceilling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagging where necessary ( ground floor). (excluding cost of chipping over concrete surface) surface/15mm thick cement sand plaster with (mix1:6)....complete External Plaster Outside wall Outside wall Deduct for openings internal 20 mm thick cement sand plaster with (mix1:6) Inside wall Inside wall For Ceilling plaster 10mm Th (1:4) Total Qty Neat Cement puning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc (note: cement 0.152 cu.m per 100 sqm) コン Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to matc with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/5q.m. b) Area of each tile above 0.09 Sq.m (i) Coloure decorative -Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to recelve decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint Including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. In Ground Floor: (a) One Coat Protective and Decorative Acrylic exterior emulsion paint of approved quality. as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion 5 Supplying 1.5mm thick M.S sheet fitted and fixed on one or both faces of M.S/W.I gate etc with point welding at not more than 150 mm apart complete in all respect as pe design including cost of all labour and materials. Door, winwdow M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round/square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. Including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in-charge. Door & windo (a) M.S.or W.I. Ornamental grill of approved design joints continuously weldec with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above (24 kg/sqm) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smooth surfaces by sand papering etc. Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On steel surface, Two coats ying, fitting & foang UPVC pipes A- Type and fittings conforming to IS: 13502 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (1) 75 mm. Dia. c) Bend 87.5 degree (i) 75 mm. Dia. Display Board
