Tender For Provision Of Trg Infra For Htt-40 A/C For 6 Tettra School At Afa Hyderabad; 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance exceeding 1.5 K but not exceeding 5 Km complete all as specified and directed.. 2 M&L VitrifiedDouble charged / Dark shade / Ultrachargedtiles (any shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. 3 M&L screed bed or bedding layer of15mm thick in Cement mortar 1:6for floor finished complete all as specified. 4 M&L VitrifiedDouble charged / Dark shade / Ultrachargedtiles (any shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. 5 M&L rendering 10mm thick in CM 1:4 as backing to tiles in skirting/dado etc 6 Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600X300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed. 7 M & Lfor coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in Epoxy Grout 2 to 3 mm spacer and filled withwhite cement mixed with matching pigment over and including 20 mm thick screed bed in CM 1:6 all as specified. 8 S&F in repair vitreous china pedestal pattern wash down water closet casket type white with plastic water closet seat including all fittings and joints complete all as specified and directed.( Make Parryware Apex Cat Part No. C8643(S-220) / Equivalent in Hindware, Cera etc). 9 Supply and fixing in repair vitreous china wash basin counter sunk type oval shape, 550x400 size (approx)white including 32 mm chromium plated waste fitting , fixing brackets, in granite slab complete all as specified and as directed.( Make Parryware Sepia / Equivalent in Hindware, Cera etc). 10 S&F in repairs 32/40 mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap and 32 mm dia PVC flexiable waste pipe complete all as spsecified and directed. 11 S & F in repair Vitreous china urinal half stall type white with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified and directed. 12 S&F 15 mm pillar taps fancy type cast copperalloy with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed. 13 S&F in repair Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 14 S&F 15 mm bore Two way Bib taps chromium plated fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe 20 mm outer dia including suitable connector socket all as specified. 15 S&F 15 mm bore Stop valves / angle valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed for CPVC pipe 20 mm outer dia including suitable connector socket all as specified. 16 S & F in PVC connections 15mm size with PTMT nuts of length 450mm. 17 S&F of5mm thick looking mirror of selected quality glass, mounted on 12 mm thick pvc sheetand fixed with wooden plugs and chromium plated screws including necessary joining cleats, glazing clips, rubber packing with anodised aluminium beading etc complete all as specified. 18 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified 19 S&F in repairs for Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed by Engr-in-Charge. 20 S&F in repairs for Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. 21 S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls / floorincl taking down old pipes of any description completeall as specified and as directed 22 S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floorincl taking down old pipes of any description completeall as specified and as directed 23 S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed 24 S & F in repairs PVC (SWR) bend of 75 mm dia . 25 S&F in repairs 110mm bore PVC SWR bend of 110 mm dia. 26 S&F in repairs 110mm bore PVC SWR bendwith acces door complete all as specified 27 S&Fin repairs 110mm bore PVC SWR junction single (single T)equal or unequal 28 S&F in repairs PVC (SWR) 110 mm dia Vent cowl 29 M&L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed. 30 Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedincluding taking down of existing pipes, cutting grooves/ holesin brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and directed. 31 Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified 32 S&F ofProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. 33 S&F ofFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.suppling & fixing in opening as per specification & drawing all as specified and directed. 34 S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing 35 S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube in opening as per manufacturer instruction. 36 S&F for 5mm thick Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. 37 S&F of 100mm stainless steelbutt hinges, cold rolled medium weight complete all as specified. 38 Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/ blankets any thickness, incl cover filltets and grids. 39 Providing and fixing 12 mm thick semi perforatedfalse ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. 40 Demolition of RCC of any description complete all as specified and directed 41 M&L Providing precast RCC type B1 (1:2:4) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete. 42 M&L for precast RCC 1:2:4 type B1 (using 20mm graded aggregate) for slabs incl necessary form work, set in CM 1:4 complete all as specified and directed by Engineer-in-Charge(Note :- Reinforcement shall be measured and paid seperately) 43 M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm diacomplete all as specified and directed by Engr-in-Charge. 44 M&L for Mild Steel TMT 6 to 8mm dia bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed by Engr-in-Charge. 45 Taking down chowkats or frames with shuttersn exc 1.5 sqm each of any description (without taking off shutters from the frame) complete all as directed 46 Taking down Chowkhats or framesexc. 1.5 sq. m but n exc 4 sqm each but with shutters (without taking off shutters from the frames) 47 S & F for powder coated (Thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators/ grills with one or more rebates including joining cleat for fixing, etc complete, as specified and directed. 48 Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 49 M & L for Powder coated (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, Sliding/hanging type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, stoppers, locking arrangement etc. complete all as specified and directed. 50 S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, 200mm tower bolts, anodised aluminum snap beading screws, etc complete, as specified and directed. 51 S&F 5.5 mm thick tinted glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed. 52 S&F 5.5 mm thick figured/frosted glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed. 53 M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified 54 S&F 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. 55 S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed. 56 M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as directed. 57 S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as spfd and directed. 58 S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodisedcomplete all as spfd and directed. 59 S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as spfd and directed. 60 Demolition of brick work/PCC Block masonry or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc as directed by Engr-in-Charge. 61 M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge. 62 M & L Granite (of any type) work (table rubbed and polished) 20 mm thickin steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all spfd and directed. 63 S & F forfor Steel rolling shutters without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete push pull ormanual type, thickness of laths in 1.25 mm etc complete all as spd and directed. 64 M&L preparation of new steel surfaces of any description exceeding 10 cm width or girth, when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. 65 S&F Safety lever locks mild steel with 4 levers for rolling shutters complete. 66 S&F Ball bearing for rolling shutters complete. 67 Taking down cement or cement lime plaster on brick wall / stone walls/concrete surfaces, ceilings etc. including ranking out joints, hacking for key, scrubbing down with water etc. 68 M&L 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on brick or concrete surface of ceilings. 69 M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge. 70 M & L preparation of newplastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified. 71 M&L forpreparation of new plastered surfaces of walls andapplying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick Birla wall care putty on plastered surfaces complete all as specified. 72 Taking downexisting tar felt, water proofing membrane etc of any description, any typeincluding loose plastering / screed , padding concrete etc if any and removing all loose particles with wire brushes, removing bitumen coating over original RCC slab by grinding, picking, , grinding of mother concrete slab to make surface smooth suitable for applying APP membrane as per manufacturers instructions, including removal of debris to a distanceexceeding 1.5 km but not exceeding5KM complete all as specified and as directed. 73 M & L , Preparation of surfaces by sweeping cleaning and washing down with water to remove dust and loose particles over RCC slab for providing roof treatment, removal of unserviceable debris to outside MD land, and applying bitumen primer @0.30kg/sqm providing and laying4mm thick APP modified water proofing membrane weight not less than 4.0 kg/sqm reinforced with non woven polyster mat weight not less than 160gm/sqm having softening point not less than 140 Degree centigrade longitudinal tensile strength not less than 800N per 5cm tearing strength of 180N (by torch application method) with minimum of 100mm side lap and 150mm end laps by application of torch. Applying a coat blown grade hot bitumen 90/15 over the membrane @ 1.20kg/sqm and applying a coat of silar reflective bitumenous aluminium paint @ 0.1Kg/sqm all as specified and as per manufactures instructions. The membrane shall be inserted in to the wall /parapet wherever required. mouth of rainwater pipes, gutters shall be properly treated to avoid ingress of the water. Note: (i) The rate quoted by the contractor shall be included for dismantling and refixing of PVC water tanks hoisted on roof,taking down and refixing of water tubing and any other fittings on roof as required and no extra shall be paid.(ii) The work shall be carried out complete as per manufacturer’s specifications and application methodology. Execution to be done with authorised trained / skilled applicator of manufacturer as per technical guidance laid by manufacturer. Company guarantee to be given by contractor after completion of water proofing work before payment. 74 M&L For PU injection Grouting as Under : 1. Drill Holes :- For aggresive leaks use instant plugging mortar. The crack that needs to be treated , should be studied in details for wall thickness and distance from the crack where boreholes needs to be drilled.2. Mechanical Packers :Providing and fixing non-return valves of @ approx 300-500 mm c/c staggered by drilling holes at cracks and leakage points at an angle 45 degrees of inclusive offlushing and cleaning of hole etc complete 3. Primary Injection : The injection process preferably done from bottom to top for vertical surface. After fixing non-return valvesInject SC 2K PU Injection PU foam with 2 component(Rapid foaming and setting solvent free frout for stopping flow of water) of Required Qty - which Creates a foam and expand over 30 times to its orginal volume when it comes in contact with water. Base and hardener mix proportion ratio 10:1 (Make - Asian Paints).4. Secondary Injection :To achieve permanant watertight crack sealing use of SC 2K PU injection resin is recommended wihtin 1 hour. In the predrilled holes and nozzles,after primary injection with foam, injectflexible plain polyurethane resin SmartCare 2K PU Injection Resin (Asian Paints) mix proportion by weight 2:1 ( Base: Hardener). of req Qty .Rates including staging/platform, lifts and leads all complete, with all the necessary tools, tackles, equipments & all required misc. itemsetc. to execute the job as per specification or as directed by Engineer-in-charge and/or Consultant.(Considered Avg 300grms per hole )Remove the injection packers and drill holes to be filled with SC Repair mortar to proceed for subsequent coating application. 75 M&L For Expansion Joint Treatment as Under : (i) Supply and apply of polyurethane/polysulphide sealant to expansion joint work includes - Insert backer rod of same or higher dia into the joint and apply polyurethane/polysulphide sealant - SC Hybrid PU Sealant/SC Polysulphide Sealant/SealArm PU. Ensure that depth of sealant filling is atleast 1/2 of the width of joint as minimum criteria.(ii) Supply and application of Tape TPE (Asian Paints) with adhesive ReArm Bond 4031 for 30mm width expansion joint. TPE (Thermoplastic Elastomer) Tape having Tensile Strength of >5Mpa, elongation of >400%, tear strength of 25 KN/m. Work includes applying of epoxy adhesive ReArm Bond 4031 first on the both flanges of the joint followed by laying tape and press it on the adhesive. Again apply second layer of ReArm Bond 4031 on the tape (sandwiching the tape with adhesive both on top and bottom). Work including surface preparation all incl etc, not incl of joint protection works.(iii) Providing and placing the 2.0mm thick and 300mm width aluminium plate as a protection for the tape. 76 S&F of 25 mm dia Decorative Drapery rods powder coated aluminium pipe fitted with ready made powder coated aluminium end cap fitted to wall / column with screws. 77 S&F in repair PVC (SWR) bends any radious 150 mm dia complete all as specified and directed. 78 S&F for 150 mm PVC (SWR) pipes as in rain water pipes single socketed in any length with rubber ring joints fixed to wallincluding taking down existing pipe complete all as specified. 79 M&L for complete removal of the existing treatment on walls and applying two coats of oil bound distemper over a primer over 1.5mm thick wall care putty on plastered surfaces complete all as specified and directed by Engineer-in-Charge. 80 M & L for point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic rigid PVC conduit (medium grade), ISI marked with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI, Make of Conduit : Precision/Finolex/Polycab/Modi(a)One Light/E/Fan/W/Fan etc. point controlled by one switch 5/6 Amps. 81 (b)One switch socket outlet point 5/6 Amps on independent board. 82 (c)One switch socket outlet point 5/6 Amps on same board. 83 Description all as per Item No-1 above but with FRLS PVC insulatedcopper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. 84 Description all as per Item No-1 above but with FRLS PVC insulatedcopper conductor cable of size 4.0 Sqmm and 4.0 Sqmm for earth continuity conductor green in colour for 20A switch socket complete.NOTE for Item Nos 1 to 3 : 1) Modular metal flush boxes, Modular White Cover Plates with frames is deemed to be included in the unit quoted rates.2) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates.3) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets. 85 M & L for flame proof point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including stove enamelled steel conduit, ISI marked with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames etc. of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases (if any) for conduits & sinkings for modular boxes, necessary fixing arrangements & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI.(a)One Light/E/Fan point controlled by one switch 5/6 Amps.NOTE : 1) Stove Enamelled Steel Conduit, Modular metal flush boxes, Modular White Cover Plates with frames etc. is deemed to be included in the unit quoted rates.2) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates.3) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets. 86 M & L for sub-main wiring alongwith earth wire of size (2 x 6.0) sq. mm + (1 x 6.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) of minimum size 20 mm dia with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed to the entire satisfaction of Engr-In-Charge. Make of cable : Havells/Polycab/Finolex/KEI. Make of Conduit : Polycab/Finolex/Modi/Precision. 87 Description all as per Item No-5 here in before but of size (2 x 2.5) sq. mm + (1 x 2.5) sq. mm earth wire complete all as specified & as directed.NOTE for Item Nos 5 & 6 : 1) Two runs of PVC wire, One run of Earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Cost of Modular metal flush boxes (if any for junction inspection) is deemed to be included in the unit quoted rates. 3) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates. 4) Cost of PVC clamps/saddles of appropriate sizes with fixing screws for fixing on walls &/or PVC cable ties etc. for fixing on steel support members (if any) is deemed to be included in the unit quoted rates. 5) The wiring shall be done with proper colour coding using Red, Yellow & Blue Coloured wires only for Phase, Black for Neutral & Green for Earth Wire. 88 S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab 89 S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab 90 S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt with Indicator complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab 91 S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab 92 S & F Switch, Flame Proof Rotary type with termination box in LM6, 16A, Single Pole, 250 V. Make : Sudhir/Crompton/Philips.Note for Item Nos 7 to 11 : Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. 93 S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor 94 S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing providedfor efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed. Make : LUKER, Cat No LT510P or techno-commercially equiv in Havells/Jaguar/Philips. 95 S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing providedfor efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed. Make : LUKER, Cat No LT520P or techno-commercially equiv in Havells/Jaguar/Philips. 96 S & F LED square shape (2 x 2) slim ceiling SURFACE light fitting 40 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size all as specified and as directed. Cat No : LKMSRS40N of make Luker or techno-commercially equiv in Havells/Jaguar/Philips. 97 S&F LED light fitting 1 x 16W flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 & IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connectors etc. complete with all accessories prewired & including connecting up with three core flexible copper conductor cable with suitable size. Make : Sudhir/Crompron/Philips/Safex. 98 Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz Noise level < 44 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Bajaj/Khaitan. 99 Supply, install, commissioning & testing of Wall Fan High Speed, PVC body suitable for wall mounting, 300 mm sweep, 2350 RPM or more, Air Delivery not less than 70 CMH, adjustable upward & downward tilt, with safety feature of motor protection through thermal overload protection device, oscillation degree 60, single phase, 240 Volts, AC, 50 Hz with & including 2 Years Guarantee and connecting up complete including provision of cable 3 core of suitable size from ceiling rose to fan in flexible hose & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Model : Swing Off-White (High Speed) or techno-commercially equivalent in Usha/Bajaj/Khaitan. 100 S&F Exhaust Fan 305 mm (12) flame proof, 1440 RPM, 1120 CFM, 0.25 HP, recommended for gas/vapour group of IIA, IIB, IIC,Zone 1 & 2 & IP 65 protection with die cast aluminium housing, epoxy powder coated, Class F Insulation, CIMFR/BIS/PESO Certified, T6 temperature class etc. complete with all accessories prewired & including connecting up with three core flexible copper conductor cable with suitable size. Make : Sudhir/Crompton/Philips. Imp Note for Item Nos 8 to 15 : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. 3) Original Purchase Vouchers, Manufacturers Warrantee/Guarantee Certificates & Test Certificates to be submitted to Engr-In-Charge for checking & record. 4) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. 5) The cost of taking down & transportation of old unsv Light Fittings/E/Fans etc. (if any) to MES storeyard is deemed to be included in unit quoted rates. 6) Installed E/Fans, W/Fans etc. Warranty card duly signed by the user should be submitted to the Engr-in-Charge 7) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate. 8) Original Purchase Vouchers, Manufacturers Warrantee/Guarantee Certificates & Test Certificates to be submitted to Engr-In-Charge for checking & record. 101 S & F TPN DB, 4 Way, IP43, IK09, Metal double door type 415 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge. Make-L&T/LEGRAND/SIEMENS/ABB. 102 S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge. Make-L&T/LEGRAND/SIEMENS/ABB. 103 S&F MCB, TPN, C-Series 415 Volts of capacity 40-100 Amps with breaking capacity 10 KA all as specified and directed by Engr-in-Charge. (1W+1S) Make-L&T/LEGRAND/SIEMENS/ABB. 104 S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed by Engr-in-Charge. Make-L&T/LEGRAND/SIEMENS/ABB. 105 S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed by Engr-in-Charge. Make-L&T/LEGRAND/SIEMENS/ABB. 106 S&F single pole & neutral sheet metal enclosure with a two pin & earth plug & socket complete with one single pole MCB, C Curve, 10 KA, 20A all as specified & as directed to the entire satisfaction of the Engr-In-Charge. Make-L&T/LEGRAND/SIEMENS/ABB. NOTE for Item Nos 16 to 21 : Make of MCBs shall be same as the make of MCB DBs. 107 Supply, install, commissioning & testing of hi wall, split-type Air Conditioner Unit of capacity 1.5 TR or higher rating based on Inverter Technology comprising of variable speed copper compressor suitable for adjusting power depending on heat load incl indl indoor & outdoor units complete with cordless remote control unit & with in-built stabilizer free operation, PM 2.5 Filter, Anti-dust Filter, Adjustable Mode, 4-way swing with & including the feature of SUPER DRY mode to facilitate humidity control etc. for better indoor air quality with 5 star rating incl electric connection complete all as specified and as directed. Make : BLUESTAR/DAIKIN/HITACHI/VOLTAS/CARRIER. 108 Important Notes :(i) Technical Specifications/particulars etc. of the Split ACs is to be obtained from OEM / Auth Supplier & is to be got approved from the GE & Engr-In-Charge before placing final order to the manufacturer.(ii) The Air Conditioner shall be initial filled / charged with refrigerant of specified quantity & the refrigerant to be used shall be Non-CFC type & as per the latest technology.(iii) Unit Quoted rates shall be deemed to be inclusive of the following connected items/job/work etc. :(a) Cost of copper refrigerant pipes for suction and discharge lines for connection of indoor to outdoor units of 1.5 ton split AC of standard size as per OEM recommendation with proper insulation including fixing arrangement with appropriate size MS clamps and jointing of pipe with brazing etc including all necessary items required complete all as specified and directed by Engr-in-Charge.(b) Cost of 3 core weather proof copper cable (size as recommended by OEM), multistranded for electrical connection of Indoor & Outdoor Units. (c) Cost of PVC pipe 25mm dia high grade for ACs drain water suitable for outdoor mounting including connecting tees, bends, reducers etc. for leakage free jointing etc, including appropriate size PVC clamps and other required material for fixing on wall/cemented surfaces at heights as specified here in above complete all as specified and directed by Engineer-in-Charge.(d) Cost of making of holes to existing wall/wooden panelling etc. using core cutting machine of suitable dia for the run of copper refrigerant tubings, connecting cables etc. and making good the distrubed surfaces/false ceilings etc. complete all as directed by Engr-in-Charge. 109 (e) Cost of MS angle iron frames of minimum size 50 mm x 50 mm x 6 mm suitable for fixing of Outdoor Units of Split ACs 1.5 Ton including fixing on wall/other surfaces etc. with necessary fixing arrangements like nuts, bolts, washers etc. as required on ground inclusive of one primer coat, one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.(f) Cost of PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in platform/plinth for embedding/holding of MS angle iron frames as cited here in above for fixing of Outdoor Units of Split ACs 1.5 Ton incl necessary formwork & applying two coats of white wash to exposed surfaces complete all as specified and directed by Engr-in-charge.(g) Cost of making good the disturbed surfaces incl matching to the existing/old surfaces.(h) Cost of neatly writing/marking MES Number on the body of Split AC Indoor Unit using stencil of size/dimensions complete all specified & as directed by the Engr-In-Charge. (j) Cost of 01 x Air Conditioning Changeover Timer, suitable for 2 x AC loads of 16 A i.e. AC1-16A & AC2-16A, with Auto & Manual mode with interval/gap time of 30 Mins, 1 Hr, 2 Hr, 3 Hr, 4 Hr, DIN Channel mounting for easy operation incl electric connection with suitable sized single core copper wires/cables & testing complete all as specified & as directed to the entire satisfaction of the Engr-In-Charge.(iv) All the necessary OEM/Auth Supplier Test Certificates as per relevant IS/IEC incl the Guarantee/Warranty Certificates is to be submitted in Original to the Engr-In-Charge.(v) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates.(vi) The contractor/firm is required to visit the site prior to quoting of the subject items/ work so as to ascertain the actual ground requirements. Any further query at a later date shall not be entertained & responsibility of the same shall rest on the contractor/ firm. 110 Supply, install, commissioning & testing of wall-mounted copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 175 V to 250 V with Digital Voltmeter & O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut off & time delay & of capacity 4.0 KVA suitable for 1.5 TR Inverter AC incl electric connection complete all as specified and as directed. Make : APLAB/VENER-7/SINETRAC or Techno-commercially equivalent makes as approved by HQ CE Command.IMPORTANT NOTE :(i) Technical Specifications/particulars etc. of the Items is to be obtained from OEM / Auth Supplier & is to be got approved from the GE & Engr-In-Charge before placing final order to the manufacturer.(ii) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates.(iii) All the necessary OEM/Auth Supplier Test Certificates as per relevant IS/IEC incl the Guarantee/Warranty Certificates is to be submitted in Original to the Engr-In-Charge. 111 Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade ofcross sectional area, 4.0 Core 16 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab/Gloster 112 Excavation in trenches by mechanical means n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in hard dense soil complete. IMPORTANT NOTE: 1) The requirement of T&P (if any) for cutting the hard standing/PCC/WBM road/floor surface (if any) or during earthwork is deemed to be included in the unit quoted rates. 2) If any damage to any Cable of Air Force/BSNL/MES etc. or to any Pipe lines develops/occurs during execution of the works then the same shall be made good by the Contr to the entire satisfaction of the concerned Dept/Section & the costs of the same is deemed to be included in the unit quoted rates.3) Quoted rate is also deemed to be inclusive of clearing/removing/cutting of vegetation/tree branches/small to medium plantings/bushes etc. so as to facilitate successful completion of the work. No extra/addl payment shall be allowed to the Contr in this regard.4) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. 113 Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick. 114 Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. 115 M&L for HDPE DWC (Double Wall Corrugated) Pipe ofrating 450 N, ISI marked with Min OD 63 mm & Min ID 50 mm, Orange colour for LT UG Cable protection with & including Couplers with rubber rings & RR & NFP properties/features confirming to IS 16205 Part 24:2018 & IEC 61386 Part 24:2007 complete all as specified & as directed by the Engr-In-Charge. Make : Supreme/Astral/Finolex/Polycab. NOTE : 1) Cost of necessary clamping with & including of PVC Clamps of appropriate size when fixed on walls, floors etc. is deemed to be included in the unit quoted rates. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. 3) Necessary Purchase Vouchers & Test Certificates to be submitted in Original to the Engr-In-Charge for scrutiny/record.
