|
| 1 | Dismantling concrete (b) Cement concrete plain 1:4:8 or 1:5:10 |
| 2 | Dismantling brick work tile, masonry or tile lining (b) In cement |
| 3 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 4 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect |
| 5 | 12.5 mm thick cement plaster 1:5 |
| 6 | 20mm thick cement plaster 1:5 in two coat work |
| 7 | scraping © cement plaster |
| 8 | Conglomerate floor 50mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 9 | Cement concrete 1:5:10 with brick ballast 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 10 | First class burnt brick work laid in cement sand mortar 1:3 in foundation and plinth |
| 11 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the ame in position Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (i) 20mm thick |
| 12 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete. (b) Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter. |
| 13 | (d) Doors and windows frame of size 161mm x 60mm with 40 mm wide double rebate weighing 4.05 kg per meter. |
| 14 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (B) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area |
| 15 | Teak wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single Leaf) (a) 35mm thick |
| 16 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 17 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed. |
| 18 | Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade |
| 19 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 20 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm |
| 21 | SUPPLY AND ERECTION OF WIRINGACCESSORIES:Supply and erection of switches, socketsand other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xii) 6/10amp. Two Way Modular Switch (OneModule) |
| 22 | (xviii) Step type Modular Electronic Fan Regulator100watts (One Module) |
| 23 | (xxvii) Bakelite Batten Holder (Large size) |
| 24 | (xvi) 16/20amp. Universal Modular ShutteredSocket (two Module) |
| 25 | (xxvi) Ceiling Rose (Flush Piano type) |
| 26 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (i) Overall size 6sq.mm (2Core) Un-armoured (On-Surface) |
| 27 | Clearance of sarkanda, weed, jala, booti etc. from wet drains by machinery having bed width (i) Upto 20 feet |
| 28 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 29 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 30 | Painting two or more coats with anticorrosive bitumastic Paint to give an even shade |
| 31 | Orient electric ceiling fan |
| 32 | Bajaj exhaust fan |
| 33 | Orient LED 20w batten |
| 34 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Glossfinish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 36 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 37 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b ) Glazing area above 0.09sqm (iii) 5 mm thick plate glass (INDIAN) |
| 38 | Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 39 | Lubricant grease (2 kg packing) |
| 40 | Lubricant Mobile oil (5 ltr packing) |
| 41 | Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) |
| 42 | Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes. |
| 43 | Providing and laying cement concrete M-15 for coping mixed in automatic computerised batching and mixing plant and transported to the site in transit mixers complete in all respect in PWD specifications |
| 44 | MS Shaft of Dia 2 inch |
| 45 | Stone grinder Pair of Dia. 24 inch having height 15 inch of pink colour |
| 46 | CI Maini of minimum 10 kg |
| 47 | Ball Pivot with base plate |
| 48 | Base Plate of IS Medium Beam 200 mm with Jack arrangement inclusive of 30mm Rod with wheel and MS Plate 40mm wide and 12 mm thick. |
| 49 | Bearing No. 6209 |
| 50 | Hopper Stand Angle |
| 51 | hopper of GI Sheet 22 gauge |
| 52 | Nut bolt Kit |
| 53 | Providing & fabrication of Mild Steel Turbine (Runner) of Diameter of 30 inch having 20 number of blades of thickness 4mm. With primer & Painting Two coat With anti corrosive bitumastic paint to give an even shade with special quality paint including delivery at site near to Kapurthala City complete in all respect has shown in Drawing |
| 54 | Providing and fabrication of MS pen stock 1.524 metre length having inlet 1 feet x 2 feet outlet 8 inch x 6 inch with outer and inner surface primer & painiting two coat with anticorrosive bitumastic paint to give an even shade with special quality paint including delivery at site near to kapurthala city complete in all respect as shown in drawing. |
| 55 | Providing MS Sheet for stone base of 4 feet x 4 feet having 4 feet having thickness 6mm with primer painting Two coat & anticorrosive bitumastic paint to give an even shade with special quality paint including delivery at site near to kapurthala city complete in all respect as shown in drawing. |
| 56 | Providing MS Channel each of Length 5 feet, 4 inch of width including delivery at site near to kapurthala city complete in all respect. |
| 57 | Providing MS Sheet shutter of 1x3 feet having thickness 6 mm including channel with primer & Painting Two coat with anticorrosive bitumastic paint to give an even shade with special quality paint including delivery at site near to Kapurthala city complete in all respect as shown in Drawing. |
| 58 | Installation & complete Set Up charges |
| 59 | MS Shaft of Dia 2 inche |
| 60 | Pulley of 40 inch dia 2 inch bore |
| 61 | V-Belt of 150 No. |
| 62 | Ball Pivot with base plate |
| 63 | Alternator 2KW |
| 64 | Alternator Pulley |
| 65 | Bearing set with Brackets 6212 No. |
| 66 | Nut bolt Kit |
| 67 | Providing MS Angle frame for Alternator of 2x3 feet with primer & painting two coat with paint to give an even shade with special quality paint including delivery at site near to Kapurthala city complete in all respect as shown in Drawing. |
| 68 | Any Other Item Please Enable Macros to View BoQ information |
