Day to day repair & miscellaneous Civil works in BSNL TE/Admn/Staff Quarters under Amritsar OA during the year 2025-26.; 1 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. 2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 3 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 5 Cement mortar 1:6 (1 cement : 6 coarse sand) 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 7 Cement Mortar 1:6 (1 cement : 6 coarse sand). 8 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 9 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.(a) Size 40 mm 10 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 11 300x16 mm 12 250x16 mm 13 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 14 200x10 mm 15 150x10 mm 16 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 17 125 mm 18 100 mm 19 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 20 Twin rubber stopper 21 Welding by gas or electric plant including transportation of plant at site etc. complete. 22 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 23 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 24 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25 40 mm thick with 20 mm nominal size stone aggregate 26 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. 27 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 28 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 29 In 75x75 mm deep chase 30 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 31 110 mm diameter 32 12 mm cement plaster of mix : 33 1:6 (1 cement: 6 fine sand) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 35 Two or more coats on new work. 36 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 37 Old work (one or more coats) 38 White washing with lime to give an even shade : 39 Old work (two or more coats) . 40 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 41 One or more coats on old work. 42 Finishing walls with water proofing cement paint of required shade : 43 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 44 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : 45 With cement mortar 1:4 (1 cement : 4 fine sand). 46 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 47 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 48 Renewing glass panes, with wooden fillets wherever necessary: 49 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 50 Re-grading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. 51 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : 52 With F.P.S. brick tiles 53 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 54 Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. 55 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 56 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 57 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 58 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: 59 Asbestos cement sheet 60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. 61 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 62 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 63 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : 64 W.C. pan with ISI marked white solid plastic seat and lid 65 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 66 W.C. pan with ISI marked white solid plastic seat and lid 67 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 68 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 69 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 70 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 71 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 72 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (a) Kitchen sink without drain board 73 610x460 mm bowl depth 200 mm. 74 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 75 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 76 10 litre capacity - White 77 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 78 White solid plastic seat with lid 79 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a) Semi rigid pipe 80 32 mm dia 81 40 mm dia 82 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 83 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 84 Rectangular shape 453x357 mm 85 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 86 15 mm nominal outer dia. Pipes. 87 20 mm nominal outer dia. Pipes. 88 25 mm nominal outer dia .Pipes. 89 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 90 15 mm nominal outer dia. Pipes. 91 20 mm nominal outer dia. Pipes. 92 25 mm nominal outer dia. Pipes. 93 Providing and fixing brass bib cock of approved quality : 94 15 mm nominal bore 95 Providing and fixing brass stop cock of approved quality : 96 15 mm nominal bore 97 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 98 25 mm nominal bore 99 20 mm nominal bore 100 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 101 15 mm nominal bore 102 20 mm nominal bore 103 Providing and fixing uplasticised PVC connection pipe with brass unions : 104 45 cm length (a) 15 mm nominal bore 105 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 106 100 mm diameter 107 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 108 15 mm nominal bore 109 20 mm nominal bore 110 25 mm nominal bore 111 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 112 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: (a) 15 mm nominal bore. 113 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15 mm nominal bore 114 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (a) 15 mm nominal bore 115 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : (a) 15 mm nominal bore 116 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 117 Providing and fixing PTMT bib cock of approved quality and colour. (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 118 Providing and fixing PTMT stop cock of approved quality and colour. (a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 119 Providing and fixing PTMT pillar cock of approved quality and colour . (a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. 120 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (a) With stainless steel cover plate minimum 1.25 mm thickness. 121 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (a) Mirindi wood available in Local Market 122 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. (a) Mirindi wood available in Local Market 123 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (a) Red/Yellow Mirandi wood 124 35 mm thick shutters 125 30 mm thick shutters 126 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 127 Red/Yellow Mirandi wood 128 30 mm thick 129 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: (a)Red/Yellow Mirandi wood (i) 30 mm thick 130 Providing and fixing 6mm thick commercial plywood of ISI marked and BWR grade of approved make in ceiling,counters,cupboards etc. i/c cost of fevicol,nails complete in all respect as per direction of Engineer-in-Charge. 131 Providing and fixing 12 mm thick commercial plywood of ISI marked and BWR grade of approved make in panelling of doors, counters,cupboards etc. i/c cost of fevicol,nails complete in all respect as per direction of Engineer-in-Charge. 132 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 133 Cleaning of blocked sewer line from Manhole to Manhole including removing of all rubbish, garbage, sludge etc. complete in all respects in BSNL Staff Quarters, T.E. Buildings & Admn. Buildings as per the directions of Engineer-in-Charge. (Note:-T&P for the work shall be arranged by the agency). (Number of manholes to be counted for payment) 134 Cleaning and desilting of chocked Floor trap,w/c trap,gully trap chamber, including removal of rubbish,earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 135 Repairs to existing steel doors/ windows/ cupboard shutters by cutting,welding etc. wherever required with or without dismantling all complete as per the directions of Engineer-in-Charge.(Cost includes the transportation of electric/gas welding plant to site). 136 Without dismantling 137 Including dismantling and refixing 138 Repairs to existing steel rolling shutters by dismantling the shutter,setting it right by removal of dents, tensioning of coil springs, greasing of side guides,straighting of main shafts etc. and refixing the shutters at its proper position and ensuring free operation of shutter all complete as per the directions of Engineer-in-Charge. 139 Re-setting of existingaluminum door/window shutters , tightening of cleats etc. refixing of pivots or aluminium hinges or rubber gasket/floor spring/door fittingswherever required including steel screws etc. all complete 140 Removal of Plants like Pipal Plant etc. from the roofs,shafts and from other parts of the Building at all heights and removing its roots,And pouring solution of Chlorpyriphos E.C 20% in the root of plants and making good the same complete as per direction of Engineer-in-Charge.(Girth not exceeding 10 cm) 141 Terracecleaning including removal of rank vegetations,grass etc. and cleaning of connecting khurra and rodding of RWP to ensure smooth flow of rain water and disposalof rubbish upto 50m lead all complete as per direction of Engineer-in-Charge. 142 Repair to leaking G.I.water supply pipe line by dismantling the G.I. pipe, replacing the GI pipe and fittings where required and restoring the water supply upto 15 metre height all complete as per direction of the Engineer-in-Charge.( GI pipes and fittings shall be paid for separetely). 143 Providing Beldar to assist Plumber / Carpenterfor attending day to day complaints in the BSNL Compounds within Amritsar OA as per the direction of E-I-C. The services for payment are for one Day ie Per Job Per Day 144 Providing and fixing PVC covers with all necessary fittings of approved quality to PVC water storage tanks of capacity up to 1000 litres placed on terrace up to level-5 all complete as per the directions of Engineer-in-Charge. 145 Providing & fixing CP brass pillar cock (Heavy type) confirm to IS:8931 146 15mm nominal bore 147 Providing & fixing CP stainless jali grating 148 100mm dia 149 Providing & fixing Brass Spindlefor C.P. brass pillar cocks/ bib cocks/stop cocks etc. 150 Providing & fixing PVC handle & ball cock for cistern with washer 151 Providing & fixing Syphon set complete for PVC Cistern 152 Providing & fixing 15mmPTMT ball valve of approved quality, with plastic floats complete: 153 Providing & fixing 20mmPTMT ball valve of approved quality, with plastic floats complete: 154 Providing & fixing CPVC 25mm Brass gate valveof approved quality. 155 Providing and fixing G.I fittings in existing GI water supply line to stop the leakage etc. all complete as per direction of Engineer-in-Charge. 156 G.I Nipples ( length up to 150 mm )/socket/ elbow/reducer elbow/Tee 157 15mm dia 158 20 mm dia 159 CPVC Brass Reducer Elbow-25mmx15mm 160 CPVC Brass Reducer Elbow-25mmx20mm 161 Credit for old dismantled/unserviceable material received from dismantling: - 162 Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brassgate valves, CP ring,CP brass towel rail etc. of all dia 163 Hydraulic Door Closer and Floor spring 164 Unserviceable door/window shutter with or without chowkhatswood i/c fittings 165 PVC Bib cock,stop cock,ball cock/WC seat cover, internalfitting of low level PVC cistern etc. 166 PVC water storage tanks 167 PVCConnection/ WastePipe 168 PVC Flushing cistern 169 Old rusted iron/steel members/ GI pipes
