Tender For Provision Of Certain B/R Items At Af Stn Bhowali; 1 Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed. 2 M&L for Plain Cement concrete 1:4:8 (type D2) (40mm graded aggregrade) in foundations, filling and mass concrete complete all as specified and directed. 3 M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as specified and as directed. 4 M&L for rendering 15mm thick in CM 1:6 on brick/concretes fair surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed 5 M&L for rendering 15mm thick in CM 1:4 on external sufaces on other than fair faces of brick work or concrete surfaces mixed with @2% WPCby weight of cement. (WPC paid seperately) and finished the surface even and fair complete all as specified and directed. 6 SupplyonlyWPC.(IntegralWaterProofing Compound) complete all as specified & as directed.. 7 M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed. 8 M&L preparation of newly plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed. 9 M&L for Surface excavation of soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. 10 Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm depth in soft/loose soil complete all as specified and directed. 11 Removing excavated soft/loose soilexc 250 m but n.exc 500m and depositing where directed complete all as specified and directed 12 M&L for Reinforced cement Concrete (Nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like complete all as specified and directed. 13 M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. 14 M&L for Formwork to soffits of suspended slabs such as landings and similar work; not exceeding 200mm thick rough finished surface of flat concrete(Horizontal or sloping) complete all as specified and directed 15 M&L for Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, for rough finished flat surfaces of concrete.complete all as specified and directed 16 M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed 17 M&L for TMT bars 06 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. 18 M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. 19 Supply and fixingvitreous china wash hand basin,white,flat back of size 550X400 mmexcluding taps, waste chain and plug porcelain stoppers but incl brackets,cutting for and pinning in ends of bracets or erecting stand complete all as specified and directed. 20 S&F stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, washers and waste pipe, washers, including cantilever cast iron brackets, connecting unionetc overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including bedding in cement mortar on to dwarf walls complete all as specified and directed. 21 Supply and fixing PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. 22 M&L for 32mm dia waste fittings, brass, chromium plated for glaxed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 23 Supply and fixing grating round 140mm size of PTMT (minimum weight 50 gms) complete all as specified and directed. 24 S &F 20 mm outer dia of pipe 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. 25 S &F 25 mm outer dia of pipe 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. 26 M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring (both) etc and making good, cuting n exc 10cm girth in brick walls complete all as specified. 27 Supply and fixingRotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specifiedand directed. 28 S&F 15 mm bore pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed and directed 29 S & F in repairs 25mm dia, stainless steel curtain rods including brackets and latto complete all as specified and as directed 30 Supply and fixing of looking mirror of size 600 X 450 mm bevelled edge of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. 31 S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 32 M&L for Coloured vetrified ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed. 33 Description all as item No 32 but as in vertical surfaces dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM (1:3) complete all as specified 34 M&L for Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick cement screed bed in CM 1:6 complete all as specified and directed. 35 Description all as item No 34 but as in vertical surfaces dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM (1:3) complete all as specified 36 M&L Glazed ceramic tiles colouredin vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screedbed in CM 1:4 complete all as specified and directed. 37 M&L 75mm thick PCC (1:3:6) typeC-1 using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified.and directed 38 M&L for forming construction(Dummy) joint 65mm deep x 10mm wide, and filled with sealing compound grade Acomplete all as specified and directed 39 M&L for 75mm thick PCC 1:4:8 typeD-2 using 40mm graded aggregate as in sub base and finished rough and fair complete all as specified and directed 40 M&L for 25 mm thick Cement concrete type B0, 1:2:4 (Using 12.5mm graded aggregate) as in floor to received tiles all as specified and directed 41 M & L for preparation of new or previously untreated steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 42 M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work conforming to Fe 290. Gde E-165 complete all as specified and directed. 43 S&F galvanised mild steel wire cloth 0.56mm nominal dia or wire and average width of aperture 1.18mm complete all as specified and directed. 44 M&L for cutting openings, through brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc to store and rubbish not exc 50mcomplete all as specified and directed. 45 M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone wall built in lime mortar exc half brick wall but not exc one brick complete all as specified and directed. 46 S&F Pressed steel frames (Size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed. 47 M&L for cement concrete type B1 1:2:4 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, fixing of holdfast, plinth courses , string courses, lacing courses parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as spectified and directed. 48 M&L PCC 1:3:6 type C-o(Using 12.5mm graded stone aggregate as in filling inside frame complete all as spectified and directed. 49 M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of IInd class hardwood complete all as specified and directed. 50 &L for 35mm thick Glazed and skelton shutters of 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc, sizes of members of shutters as specified in SSR Part- I, section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed 51 S&F 35mm thick plain, framed panelled door shutter of 2nd class hardwood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed 52 Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed 53 Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed 54 Supply and fixing of solid PVC door frame of size 50 mm x 47 mm made ouit of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed 55 M&L forfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheets strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site complete all as specified.and directed 56 S&F 100 mm long mild steel Butt hinges, medium weight, cold rolled complete all as specified and directed. 57 S&F 75 mm long mild steel Butt hinges, medium weight, cold rolled complete all as specified and directed. 58 S & F250 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. 59 S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. 60 S & F of300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 61 S & F125 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. 62 S & F of 100mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. 63 M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 64 Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories Area not exceeding 2.00 sqm eachcomplete all as specified and directed.(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) 65 S&F of 4.0 mmthick sheet glass ,ordinary qualityand size n.exc 0.50 Sqmand fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc. complete all as specified and directed. 66 S&F in repair Bib taps 15mm dia cast copper alloy chromium plated fancy type, screwed down for iron pipe or for brass ferrule fixed in repair.complete all as specified & directed 67 S&F in repair15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, .complete all as specified & directed 68 M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified & directed 69 S & F in repairs 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed
