Tender For Additional / Alternator/Imp To Dsc Billet At Afs Amla; 1 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 2 M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floorsincluding 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slurry and pointed in white or coloured cement to match, including complete all as specified and directed. 3 All as per item No 02 above but as in skirting over 10mm th CM in 1:4 complete all as specified and directed. 4 M&L for Non- skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. 5 M&L for Glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed. 6 M&L for machine cutkota stone slab flooring 20-25mm thick including 20mm thick cement screed bed in CM 1:6 laid and mirror polish to give high glossy finish, jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing including dismantling of existing complete all as specified and directed 7 M&L for Kota stone slab 20-25mm thick in riser of steps and skirting, dado pillar laid with10mm thick rendering in CM 1:6 complete all as specified and directed. 8 Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 9 M&L for 55 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor (WPC shall be measured and paid separately) complete all as specified and directed. 10 M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg/sqm and binding with clean dry sand @ 0.05 cum per sqm etc complete all as specified & directed. 11 M&L for rendering 15 mm thick in CM 1:3 with using water proofing compound all as specified and directed. 12 M&L for PCC 1:5:10 type E-2 as in sub base of floor mass filling (using 40 mm graded stone aggregate) complete all as specified and directed. 13 S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm including taking down existing pipe line complete all as specified and directed. 14 All as per item 13 above but 20 mm bore complete all as specified and directed. 15 S & F 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwedboth ends for iron pipe complete all as specified and as directed 16 M & L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc, and making good, cutting not exc 10 cm girth brick wallcomplete all as specified and directed. 17 Disconnecting existing tanks of any capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)completeall as per specified and directed. 18 Dismantling of cast iron drain pipe of 100/75mm bore jointed in lead joints or cement joints and taking out of under floors if required complete all as specified and directed. 19 S&F PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors of dia 110mm complete all as specified and as directed. 20 All as per item No 19 above but fixed to walls complete all as specified and directed. 21 S&F PVC (SWR) bends of 110 mmcomplete all as specified and as directed. 22 S & F 110 mm bore of pipe PVC (SWR) bends with access door of any radius / shoefixed to PVC pipes complete all as specified and directed. 23 S&F PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors/wall of dia 75mm complete all as specified and as directed. 24 Supply and fix PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed. 25 S&F for PVC floor trap, plain with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1with solvent cement of dia 100mm complete all as specified and directed. 26 S & F PVC (SWR) reducers any radius 110mm bore complete all as specified and directed. 27 S & F 110mm bore PVC (SWR) junction, (single T) equal or unequal with or without door access complete all as specified and directed. 28 S & F PVC (SWR) vent cowl 75mm dia complete all as specified and directed. 29 Supply and fixvitreous china wash basin oval type size 560x400x205mmwith fixing accessorieson counter with silicone complete all as specified and directed . 30 S&F in repair vitreous china wash down watercloset pan (pedestal pattern) white (excluding fixing bolts flushing cister and slush pipe) with seat cover with CP screw complete all as specified and directed. 31 S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed. 32 S & F Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe) with Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) as approved complete all as specified and directed. 33 S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle etccomplete all as specified & directed. 34 S & F 15 mm bore, Pillar taps with aerator chrome finished made of brass faucet deck mount installation type fixed to wash basin complete all as specified and directed . 35 S&F in repair bib tapof CPfancy type long body with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed complete all as specified and directed. 36 S&F chromium plated wall mixer with provision foroverhead shower complete with 115mm long bend pipe, connecting legs & wall flange,screwed down for iron pipe and fixing complete all as specified and directed. 37 S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed. 38 S&F Health Faucetchromium plated with 8 mm dia one meter long flexible tube and wall hook of same finish , screwed down, for iron pipe or for brass ferrule complete all as specified and directed. 39 S & F in repairsbrass chromium plated conceled stop/angle cock of bore size 15 mm, in position conceledin walls/ceilingsor floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces completeall as specified and as directed 40 S&F in repair angle valves CP screwed down high pressureof fancy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore complete all as specified and direcetd. 41 S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm etccomplete all as specified and directed. 42 S&Fbrass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed 43 S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed. 44 S & F32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 45 S&F Looking mirror bevelled edge mirror of selected quality glass, commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers of any size as required complete all as specified and directed. 46 S&F CP soap tray fixed to walls with rubber plugs complete all as specified and directed. 47 S&FBrass chromium plated tubular towel rail 20mm dia & 60cm long between flanges complete all as specified and as directed. 48 Demolition of concrete is reinforced (Reinforcement cut as required to faciliate demolition)of any descrition and in any position not other wise specially provided for complete all as specified and directed. 49 M&L for 18-20mm thick granite (of any type)work (table rubbed and polished ) in steps, jambs, pillars, window cills, corner shelf, cooking plateforms and like over 15mm thick screed bed in CM 1:6including pointing in white cement 1:2using marble dust with admixture of pigment to match with shade of graniteetccomplete all as specified and directed. 50 Rounding to the edge of stone slabs on edge such as cooking platform and counter top complete all as specified and directed. 51 M&L for brickwork with Fly ash brick75 kg/cmsq compressive strength oldsize , is straight or curved on plan exc. 6 metermean radius built in cement mortar 1:6 complete all as specified and directed. 52 M&L for 25mm thick cement concrete 1:2:4 type B-1,(using 20mm graded stone aggregate) as in floors to receives tiles complete all as specified and directed. 53 M&L for Complete taking down/demolition carefully any type of existing roof treatment i.e. mud puska, brick coba, brick tiles, any type of tiles, PCC, plastering, leeping etc. of any type and thickness varying from 20mm to 125mm in roofs including cleaning the surface after removal (removing the rubbish) complete all as specified and as directed. Note:- Rate ofremoval of debris out side from MoD land deemed to be included in the same item. 54 M&L for Brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and directed. 55 M&L for 25mm thick cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in padding finishing surface of concrete topping fair andevencomplete all as specified and directed. 56 M&L for 10mm thick plastering in CM (1:3) on green concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed.Note - WPC shall be measured and paid separately. 57 Material & Labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 lit per sqmincluding laying of APP based polymeric membrane weighing not less than 3.00 kg/ Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt,not less than 150gms/sq. m) land on primed surface by tension application with 100mm over lap travers and 150mm over lap longitudinalcomplete all as specified and directed. 58 Material & Labour forapplying two coats of aluminum paint @ 0.20Kg /Sqm on each coat complete all as specified and directed. 59 Taking downchowkats or frames with shuttersnot exceeding 1.5 Sqm each(without taking off shutter from the frame) complete all as specified and directed. 60 Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and refixing in same opening including necessary repairs complete all as specified and directed. 61 S&F PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube as per specification in drawing complete all as specified and directed. 62 S & F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement forstyleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top railsand bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed. 63 S&F 100 mm long butt hinges stainless steel (ISI marked) fixed with stainless steel screw complete all as specified and directed. 64 S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. 65 S&F 125mm long size extruded aluminium alloy handles, cast type anodised complete as specified and directed. (ISI Marked). 66 Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. 67 All as per item No 66 above but without glazing bars complete all as specified and directed. 68 S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. 69 S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed. 70 S&F in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panecomplete all as specified and directed. 71 S&F Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. 72 M&L for Repair to steel window, ventilators & misc iron works with welding and replaced defective part & section, making function with oiling & greasing etc work complete all as specified and directed 73 S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixedto aluminium frame work complete all as specified and directed. 74 M&L for 75mm thickcement concrete 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. 75 Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete as specified and directed. 76 M&L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brickwork or concrete surfacescomplete all as specified and directed. 77 M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 onfair faces of brickwork or concrete surfaces in two layers (10+5)mm top layer 5mmmixed with liquid water proofing compound @200ml per bag of cement or as per manufacturers instruction complete all as specified and directed. Note : WPC shall be measured and paid separately 78 Supply onlyliquid Water Proofing Compound. 79 M & L for rendering 5 mm thick on ceiling on fair faces ofbrick or concrete surface in CM (1:3) finished even and smooth without using extra cement all as specified and directed. 80 M & L preparation of newly plastered surfaces and applying three coat of white wash on ceiling incl preparation of surfaces complete all as specified and directed. 81 M&L complete removal of existing surfaces and applying three coat of white wash on ceiling incl preparation of surfaces complete all as specified and directed. 82 M&L for complete removal and preparation of old decorated treatment on walls (external / internal) and ceiling finishes by scrapping with trucare wall sanderL-01/ H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Dr Fixit Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr Fixit Pidicrete URP modified mortar or as specified complete all as specified and directed. 83 M&L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 2 mm over the plastered /old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1: Mix the putty powder by adding water as per manufacturers instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.Step 3: Allow 6-8 hours time to dry the putty surface. 84 M&L for one coat of acrylic water based interior/exteriorgrade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. 85 M&L for preparation of old/ new decorated surface treatment on wall/ ceiling and applying two coats of oil bound emulsion distemper coverage 8-10 sqm /ltrof approved tint on prepared surfaces as per approved manufacturers instruction complete all as specified and directed. 86 M&L for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint with crack filling upto 5 bars of positive hydrostatic pressure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ ltr as per manufacturers instructions and all coats to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.Make : Apex Ultima Protek Asian paints paints/ Nerolac excel top guards/ Berger weather coat long life 10 87 M & L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. 88 M&L for preparation of old paintedwooden surfaces over 10 cm width or girth and applying onecoat of synthetic enamel paint etccomplete all as specified and as directed. 89 M & L complete removal andpreparation of old painted surface of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint with a coat of primer etc complete all as specified and as directed. 90 Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed. 91 Taking down & Refixing crefully ceiling fan/wall mounted fans from any height and of any make any sweep for servicing & overhauling and replacing of rubber bushing, nuts, bolts, pins etc complete all as specified and directed. 92 Taking down & Refixing crefully exhaust fan from any height and of any make any sweep for servicing & overhauling and replacing of rubber bushing, nuts, bolts, pins etc complete all as specified and directed. 93 M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade IS-694 marked drawn through in and including heavy duty grade (ISI marked) PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, with GI sunken boxeswith earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the One light controlled by one, one way switch 5 AmpsNote:- Cost of Modular Cover Plate, Inner frame suitable for mounting modular switches, socket etc are deemed to be included in the quoted rate. 94 All as per item No 93 above but one fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed. 95 All as per item No 93 above but one 3 pin Amps switch outlet point controlled by one switch on independent board. 96 All as per item No. 93 above but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. 97 S&F modular switch piano flush type, single pole, one way, 5/6 Amp single module complete all as specified and directed. 98 S&F modular switch piano flush type, single pole, one way, 15/16 Amp single module complete all as specified and directed. 99 S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. 100 S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. 101 S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. 102 S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. 103 S & F lamp holder, PVC / polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. 104 S&F Modular White cover plate with frame, 1 module complete all as specified and directed. 105 S&F Modular White cover plate with frame, 2 module complete all as specified and directed. 106 S&F Modular White cover plate with frame, 3 module complete all as specified and directed. 107 S&F Modular White cover plate with frame, 4 module complete all as specified and directed. 108 S&F Modular White cover plate with frame, 6 module complete all as specified and directed. 109 S&F Modular White cover plate with frame, 8 module complete all as specified and directed. 110 S&F Modular White cover plate with frame, 11 module complete all as specified and directed. 111 Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S&F Modular Metal GI flush box (thickness of flush box not less than 2 mm) of 1 module for mounting of modular switches and sockets including blank plate for blank module complete all as specified and directed. 112 All as per item No 111 above but 2 module complete all as specified and directed 113 All as per item No 111 above but 3 module complete all as specified and directed 114 All as per item No 111 above but 4 module complete all as specified and directed 115 All as per item No 111 above but 6 module complete all as specified and directed 116 All as per item No 111 above but 8 module complete all as specified and directed 117 All as per item No 111 above but 11 module complete all as specified and directed 118 S&F LED 10 W bulb works on AC supply complete all as specified and directed. 119 S & F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. 120 S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and necessary mounting arrangements alongwith provision of 0.75 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including suitable dia GI pipe medium grade bracket 0.75 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. 121 Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch A while deriving the Contract Sum for Acceptance.
