Tender For Repair/ Replacement And Certain Misc B/R Works In The Area Of Kufri Under Ge (I) Jutogh; 1 Dismantling of floor hearth or wall tiling/ stone slab incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. 2 Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed. 3 Supply only liquid water proofing compound, complete all as specified and directed. 4 M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed. 5 M&L for PCC 1:3:6, type C-2,75mm thick as in plinth protection path etc. complete all as specified and directed. 6 M&L for chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, set ,jointedand pointed in neat cement slurry with grey cement and pigment in floors laid over 20mm thick screed bed in CM 1:6 complete all as specifiedand directed. 7 M&L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as base course for floors, complete all as specified and directed. 8 M&L for non skid ceramic coloured tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. 9 M&Lforof glazed ceramic coloured tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm/ 300x200x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4 complete. 10 M&L for non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6 , complete all as specified and directed. 11 M&L for non skid ceramic coloured tiles 7-8mm thick (Square/ rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqmin vertical surface such as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed. 12 Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortarin floors, aprons, cooking platform etc., complete all as specified and directed. 13 M&L for 15-18mm thick granite(of any type )worktable rubbed andpolished) in pillar/ vertical surface, cooking platformand like in 15 thick screed bed cement mortar 1:4including edges of stones slabs one edges such as cooking steps or etc,moulding, pointingin white cement 1:2using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. 14 M&L for machine cut pre-polished kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including 20mmthick screed bed with CM 1:6, complete all as specified and directed. 15 S&F 1.5mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, homogeneous laid with approved rubber based adhesive in floors(including dismantling of old PVC sheet from floor and removing from site), complete all as specified and directed. . 16 Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided, complete all as specified and directed. . 17 M&L for RCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in chajja repairs at any height including providing and erecting at site conventional steel double scaffolding to reachat any height/any place of work on the external façade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and materials etc. all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of proposed work etc., complete all as specified and directed. 18 M&L for reinforced cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in columns/ beams/ slab, landings and in shelves and the like complete all as specified and directed. 19 S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed. 20 Taking down cement or cement lime plaster, of any descriptionincl tiling etc. complete all as specified and directed. 21 M&L for rendering 10 mm thick in cm (1:6) on brick workorconcrete surfaces finished even and smooth complete all as specified and directed. 22 M&L for rendering work 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) finished even and fair (without using extra cement) using water proofing compound, complete all as specified and directed. 23 M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over aone coat of wall care putty 1-2mm thick on walls complete all as specified and directed. 24 M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed. 25 Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed. 26 S&F GI Clip-in false ceiling tiles of with beveled edges of with GI sheet (600mmx600mm) is manufactured out of 0.50mm galvanized steel of 100 gsm/sqmtr sheet having powder coated with 60 microns polyester paint on front side. These tiles shall have beveled edges. Two sides of each tiles are raised and piped and stopped to ensure positive engagement into the spring clip-in profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0.5mm galvanized steel clip-in profiles of size 24mm x 34mm of 0.5mm thick and installed at 600mm c/c spacing to support the tiles, clip-in profiles are suspended with hold on clamps. Suspension angles or 4mm G.I Wire are suspended from the roof structure. The tiles are held in place by pressure clips. In the flexible system the hanger and suspension clip replace the suspension angle. G.I Edge profile are of size 24mm x 24mm x 0.35mm thick with matching the color with tiles, complete all as specified and directed. 27 M&L for solid PVC as in use wall/ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl necessary beading work, incl same board beading for joint sealed complete all as specified and directed. 28 Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed. 29 M&L for brick work with old size kiln burnt sub class B bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, completeall as specified and directed. 30 M&L forbrick work with sub class B brick in cement mortar 1:6, straight or curved on plan to anyradiusin half brickthickwallbuilt complete all as specified and directed. 31 Dismantling plain orcorrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. 32 S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc. with grade of Zinc coating 120 GSM complete all as specified and directed. 33 S & F 0.63 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 GSM, bent to shape as required, fixed withcoach screws and washers in roofs and wall etc, complete all as specified and directed. 34 S&F Pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. 35 S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board fixed with self tapping screws, complete all as specified and directed. 36 Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. 37 Dismantling timber scantlings, framed/unframed work of size 40 sqcm and over in section, in any position in any position with nails etc., complete all as specified and directed. 38 S&F rooftrusses (framed) trussed,purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc., complete all as specified and directed. 39 S&F framed work such as grills, gratings, etc. With ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of water tanks staging and similar work conforming to Fe-290. Gde-E-165, complete all as specified and directed. 40 M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 41 Hacking out old broken glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. 42 S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. 43 S&F sheet glass 4.00 mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, complete all as specified. 44 Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed. 45 Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed. 46 Taking downshutters of any description exc 1 Sqm each complete all as specified and directed and n exc 2 Sqm each, complete all as specified and directed. 47 Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs, complete all as specified and directed. 48 S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. 49 M&L for framed work as in doors frame/chowkats or gates of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting etc of Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed. 50 S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately. 51 S&F in repair factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction and making it good to match with existing surface, complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 52 S&F steel windowswith side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. 53 S&F steel windowswith side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed. 54 S&F Steel ventilators, with top hung shutter including hinges steel peg stay, complete all as specified and directed. 55 S&F 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial types on both sidesincl teak wood beading around the shutters complete all as specified and directed. 56 S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. sized of members of shutter with three number of panels complete all as specified and directed. 57 S & F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanized wire staples fixed with wooden beading complete all as specified and directed. 58 S&F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanized wire staples fixedwith wooden beading complete all as specified and directed. 59 Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc. under 40 sq. cm in sectionin any position with nails etc. complete all as specified and directed. 60 M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcmincluding repairs or if refixed in old position complete all as specified and directed. 61 Dismantling boarding any description, fixed in any position with nails for cupboards complete all as specified and directed. 62 M&L for block board 18/19 mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with nails/ screws sin cup board shutter/ pelmets etc. or to timber frame work, including sunmica, completeall as specified and directed 63 S&F hasp and staple, safety type, of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size, complete all as specified and directed. 64 S&F Continuous piano hinges mild steel bright finish or electro galvanized with open flap width 30mm, fixed with screw complete all as specified and directed. 65 S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and directed. 66 M&L for preparation ofnew wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 67 S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed. 68 S&F 300mm Mild Steel ordinary rat tailrod pattern springs including roller and roller plate complete all as specified and directed. 69 S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed. 70 S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed. 71 S&F Butt hinges 75mm long, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed. 72 S&F aluminium anodised barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. 73 S&F aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. 74 S&F in repairfloor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors, complete all as specified and directed. 75 Taking up or down 15mm bore, steel water tubing & connections, complete all as specified and directed. 76 Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. 77 S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore, completer all as specified and directed. 78 S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore, completer all as specified and directed. 79 S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etccomplete including 20mm dia float valve and dismantling of existing tank,completer all as specified and directed. 80 S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etccomplete including 20mm dia float valve and dismantling of existing tank,completer all as specified and directed. 81 S&F in repair 20mmball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms, completer all as specified and directed. 82 S&F in repair 21-22 inch dia galvanized mild steel pan mortar(Tasla/ghamela) not less than 1mm thickwith for04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank covercompleter all as specified and directed. 83 M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltrcompleter all as specified and directed.Note : Any damage to FV, pipe etc shall be make good by the contractor. 84 All as per Srl item No 93.00 above but for capacity of tanks exc. 500 ltr and n exc. 1000 Ltr, complete all as specified and directed. 85 S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 86 S&F in repair 15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, completer all as specified and directed. 87 S&F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe,completer all as specified and directed. 88 S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule,completer all as specified and directed. 89 S&F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type fixed,completer all as specified and directed. 90 S & F in repair 15mm brass CP wall/ Sink/ WHB mixer for mixing hot and cold water with hand sjower, complete all as specified and directed. 91 S&F in repairof60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed. 92 S&F in repair CP brass jet spray (health faucet) with flexible pipe 1.50m long fixed to EWC suitable for 15mm bore of pipe complete all as specified and directed. 93 S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, completer all as specified and directed. 94 S&F in repair 15mm size PVC connection pipe with PTMT nuts of length 600mm long,completer all as specified and directed. 95 S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts complete all as specified and directed. 96 S&F in repair EWC vitreous china wash down water closet pan pedestal pattern white with complete fitting including P/S Trap, jet spray and fixing with brass screwcompleter all as specified and directed. 97 S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device,completer all as specified and directed. 98 S&F in repair vitreous china squatting pan, Orissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc.(excluding flushing cistern and flush pipe complete all as specified and directed. 99 S&F in repair PVC low level flushing cistern 10 Ltr capacity valve less symphonic action type white as approved with ball valve flat back & handle including bracketscompleter all as specified and directed. 100 S&F in repair Wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard lengthcompleter all as specified and directed. 101 S&F in repair 600x450 mm bevelled edge mirror of selected glass mounted on 6mm thick AC buildingboard or commercial plywood and fixed to wooden on plugs with chromium plated brass screws and cup washers, complete all as specified and directed. 102 S&F in repair 20mm dia mild steel chromium plated curtain rails fixed with brackets, stops, rollers, etc.completer all as specified and directed. 103 S&F in repair stainless steel plate rack (utensil rack) for kitchen of size 750 x 600 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plugcompleter all as specified and directed. 104 S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, completer all as specified and directed. 105 M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement,completer all as specified and directed. 106 S&F in repair 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,completer all as specified and directed. 107 S&F PVC SWR Bends in any radius 110 mm bore with access door,completer all as specified and directed. 108 S&F PVC SWR Bends in any radius 75 mm bore with access door,completer all as specified and directed.
