Tender For Gitanjali Restaurant At Konark Puri, konark-Odisha

Tender For Gitanjali Restaurant At Konark Puri-2 Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead.etc.as per the direction of Engineer-in-charge. 3 Dismantling & removing doors,window & ventilatots including removal of frame ,hinges ,fastening & stacking the same for reuse & removing the debris within 50m lead etc.as per the direction of Engineer-in-charge. 4 Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc.as per the direction of Engineer-in-charge. 5 Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead etc as per the direction of Engineer-in-charge. 6 Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead etc as per the direction of Engineer-in-charge. 7 Dismantling and removing 2.5cm thick grading concrete from roof slab, cleaning the surface, lowering and removing the debris within 50m lead etc as per the direction of Engineer-in-charge. 8 Dismantling and removing lime concrete flooring 7.5cm to 10cm thick including stacking the useful materials for reuse and removing the debris within 50m lead etc as per the direction of Engineer-in-charge. 9 Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. 10 Providing & layingPlain Cement concrete (PCC )of proportion (1:2:4) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge 11 Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portlandslag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. 12 Providing 12mm thick C.P. 1:6 finished even and smooth onmasonry wallsincluding racking out joints, scrapping and cleaning the surfaceand finishing the plastered surface smooth toproper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. 13 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 14 Providingfitting, laying and fixing ofvitrified tile flooring usingColour printed tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 1200mmx600mm special plane / printed series of approved qualityofMatt digital with slip shield Grande Matika Beige Light SS of Somany or equivalenthaving base price of the tileRs. 80 -90 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge. 15 Providingfitting, laying and fixing ofvitrified tile flooring usingColour printed tiles having thickness of 6.5mm to 6.7mm conforming to IS 13756 of 600mmx600mm special plane / printed series of approved qualityofMatt digital Moroccan Tiznit Bianco of Somany or equivalenthaving base price of the tileRs. 80 -90 / sqft in all floors on 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge. 16 Providing 1200mmx600mm size special plain/printed seriesedge cut vitrified wall tilesof premium grade of approved make having thickness 6.5mm to 6.7mm of approved qualityof Digital FP Grande Favara Crema FP of Somany or equivalenthaving base price of the tileRs. 80 -90 / sqft in all floor approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge 17 Providing Granite stone prepolished 20mm thick of areaabove 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. 18 Providing Granite stone prepolished 20mm thick in dadoof approved quality, colour and size in dado,riser of steps anddado of landings in all floors at all height on 12mm thick bed of cement mortar of mix (1:3)with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the worketc. complete in all respect as per specification and direction of Engineer-in-charge. 19 Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 20 Providing 20mm thick of above 0.40 Sqm Kota Stone tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 21 Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment and creating a chemical barrier under and all-around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, surrounding of pipes and conduits etc. complete (plinth area of the building at GROUND FLOOR only shall be measured) as per drawing, design and direction of Engineer-in-charge. (Chloropyrifos emulsifiable concentrate 1.0%) 22 Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour etc. complete as per direction of Engineer-in-charge. 23 Providing and painting two coats with plastic emulsion paint of(Nerolac/ Asian/ Berger/ Dulox or equivalent make) approved quality and approved shade over coat of primer of approved quality in all floors at all height by making the surface to the interior plastered surface over a coat primer with water bond cement primer of approved quality including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge. 24 Painting to external surface of building with two coats of weather seal coat of approved shade over coat of primer and quality of approved designafter cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 25 Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and , cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 26 Providing & fixing factory made uPVC white colour sliding glazed window three track three panels sliding window wiyh fly proof SS wire mesh(two nos.glazed& one no. wire mesh panels) made of small series frame 92x44mm sash 32x60mm both having wall thickness of 1.9(+,-)0.2mm & single glazing bead of appropriate dimension etc complete as per direction of EIC. 27 Providing & fixing factory made uPVC white colour sliding glazed window two track two panels sliding window made of big series frame 67x50mm sash 46x62mm both having wall thickness of 2.3(+,-)0.2mm & single glazing bead/double glazing bead of appropriate dimension etc complete as per direction of EIC. 28 Fixed window/ventilators made of frame 47x50mm mullion 47x68mm both having wall thickness of 19(+/-)0.2mm & single glazing bead of appropriate dimension.(Area upto 0.75 sqm) 29 Supplying, fitting and fixing of G.I. grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / G.I. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircaseand parapet railingssquare bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.) 30 Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 31 Providing ,fitting and fixing of Iron work wrought and put up in trusses Steel Struss (With M.S. Pipe) with supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect. 32 Providing ,fitting and fixing of plain formed TATA BLUESCOPE standard back coat coloured in standard length at 3000mmwith supporting,straps,jointing materials etc including cost of all materias , labour and machinaries, T&P etc.complete in all respect. 33 Supplying , fitting and Fixing of Stainless steelof 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr C/C and stainless steel square pipe bracing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification , buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P, etc. required for the complete in all respects. 34 Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of water stirred first & 2 litres of Zycoprime/equivalent added and stirred(total 23 litres)) till it meets the saturation level and testing as per RILEM or by water drops test in which water drops do not absorb but drops remain or rolls. 35 Providing and installing two component acrylic modified cementitious waterproofing coating with Masterseal 551 /Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakagePotlife @ 25°C 2 hours &@ 40°C 30 minutes,Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L 36 BOUNDARY WALL 37 Cleaning and grubbing road land including uprooting trees rank vegetation, grass,bushes , shrubs, saplings and girth up to300mm,revoval of stumpsof trees cut earlier and disposal of unservicable materials and stacking of servicable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. 38 Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 39 Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). 40 Providing and laying plain cement concrete of proportion (1:4:8) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge. 41 Single under reamed pile of 300mm dia & 6m depth foundation with RCC M25 using 12mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel. Single under ream pile 42 For each Excess / less depth of 0.5m from the initial depth of 6.0m Add / deduct form the rate 43 Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. 44 Foundation 45 Plinth Beam 46 Columns 47 Lintel 48 Slab 49 Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. 50 Providing Brick work with Fly ashbricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 withdimensional tolerance +/ - 2percent in cement mortar ( 1 cement: 6 sand), for foundation & plinth with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour,conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. 51 Providing Brick work with Fly ashbricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 withdimensional tolerance +/ - 2percent in cement mortar ( 1 cement: 6 sand), for superstructure with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour,conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. 52 Providing 12mm thick C.P. 1:6 finished even and smooth onmasonry wallsincluding racking out joints, scrapping and cleaning the surfaceand finishing the plastered surface smooth toproper plumbs and levels and providing grooves as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, royalty, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. 53 Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royaltiesof all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. 54 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 55 Painting to external surface of building with two coats of weather seal coat of approved shade over coat of primer and quality of approved designafter cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 56 INTERIORWORK 57 Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. complete.As per instruction of EIC(Rate as per SOR-2022) 58 Providing fitting and fixing of Gypsum false ceilling with Aluminium anodised T Section No. 3215 with 2-0 center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0x2-0 suspended from ceiling etc complete.As per instruction of EIC 59 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. Reffered from (DAR 2023 Volume II item no- 26.22.1 page no 2000) 60 Supplying and fixing of Door paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete.(Rate as per SOR-2022) 61 Supply and installation(including Labour) of premoulded plaster of pariscornice of 100mm depthonroof corner of the room with complete finish (Excluding painting) as per the direction of Engineer-in-charge. 62 Supplying and fixing of Wall papervinyl coated ,paper based ,textured , embossed wth thickness 0 .3 mm min. of approved design fixed with adhesive over wall surface finished with putty and primer including cost of all material and labour etc. Complete as per the direction of Engineer-in-charge. 63 Providing & laying of tile carpet 50 x 50cm made of PET of reputed brand such as (Heritage/ SKIPPER or equivalent) of pile height of 5mm with pvc backing, having density of 2800 g/m, of approved design/shade with sound observation properties. Rate includes complete installation with backing foam, necessary adhesive etc. including the cost of all materials, cost of all labour, conveyance, loading & unloading, and T&P, etc. complete in all respect as per direction of the Engineer in Charge 64 Providing and fixing up of window curtain in required sizes having the curtain cloth fabric material: 100% Polyester, 200-300 gsm, Assorted colours plain and prints, Beige, cream, light brown, light colour with soft and smooth textured, good drapabilityof approved brands (SKIPPER / PALLETTE or equivalent), semi blackout to full blackoutincludingfixing hardwares - ceiling mounted curtain tracksof approved brands( MARVEL , JINDAL or equivalent) including ring, hooks all complete. Sheer curtain fabric of density 60 -100 gsm, of white colour with separate track including all fixing hardwareas per the instruction of Engineer in charge. 65 Supply & laying of 12 mm laminated Wooden flooring of AC5 grade with 100 hours of water resistance, scratch proof, antibacterial quality, anti static flooring of eco friendlywith plank size of 1234 x 196mm of reputed brand such as (Lamiwood/ SKIPPER) of design/shade Butterscotch walnut #6026. Rate includes complete installation with backing foam, necessary adhesive etc. including the cost of all materials, cost of all labour, conveyance, loading & unloading, and T&P, etc. complete in all respect as per direction of the Engineer in Charge 66 Melamine polishing to wood work one or more coats including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. 67 Supplying and fixing of Charcoal louver(combination of charcoaland polystyrene 8 to 12 mm thickin the way indicated by manufacturer (EUROPRATIK or equivalent brand) as per the design including cost of all material and labour etc. Complete as per the direction of Engineer-in-charge. 68 Supplying andfitting andfixing ofpanel Mouldingsof approvedmanufacturer with Width 65/22mm as per the design including cost of all material and labour etc. Complete as per the direction of Engineer-in-charge. 69 65mm 70 22mm 71 Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete 72 Providing and fixing in position wood plastic composite door frame with appropriate length of ETA Approved carbon steel galvanized (minimum 5 microns) double threaded 6.8 grade Polyamide PA 6 grade sleeve HRD C 10 anchor suitable for fastenings both on concrete & masonary/aerated blocks including cost of all materials, labours, T & P etc required for the work. complete in all respect as directed by the Architect/Engineer-in-charge 73 Providing and fixing 12mm Thick Framelessof Toughened Glass door shutter of approved brand and Manufacture, Including providing and fixing top and bottom pivot double acting hydraulic froor spring type fixing arrangement and making Necessary Holes etc for fixing required door fittings all complete asper direction of Eic.(Door handle ,lock and stopper etc paid to be separately. 74 Chromium plated fittings (Brass) (I.S.I.) Handle (I.S.I) of 125mm with 175 x 32mm plate s per drawingand specification including cost of all material T&P, etc, complete as per the direction of Engineer-in-Charge. 75 Providing & Supplying of Thrill Mesh Full Back Chair ( Black Body Black Ink),Mesh Back, 1D Adjustable Armrests, Centre Tilt Synchro Mechanism, 3 Pos Lock, Nylon Pedestal, Width: 76.1 CM, Depth: 76.1 CM, Height: 101.5-111.0CM & Seat Height: 44.5-54.0CM of godrej make or equivalent as per drawingand specification including cost of all material T&P, etc, complete as per the direction of Engineer-in-Charge. 76 Providing and fixing in position wardrobe 450mm deep with shutters out of 18 mm thk. BWP ply & shelves out of 18mm BWP ply at appropriate locations with necessary support buttons. The storage to be finished externally with 1 mm thick laminate of approved shade & internaly finished in1mm laminate with SS hinges, tower bolts, ballcatches lock, Handle (8 SS handle) etc. complete in all respects as per detail drawing & instructions of Engineer-in-Charge. 77 Providing & Fixing of Wall Panelling made out of Aluminum Section B 9835 as Horizontal & Vertical member placed @ 600 mm C/C Covered with 12 mm thick BWR Ply and 1mm thick laminate etc. complete in all respects as per detail drawing & instructions of Engineer-in-Charge. 78 Providing & Supplying of Single Seater Leather SofaOverall Size :Width: 92cm, Depth : 87cm, Height : 76cm, Seating Height : 39.5cm STITCHING: THREAD : Poly Proplin, LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 of PATRO godrej make or equivalent as per drawingand specification including cost of all material T&P, etc, complete as per the direction of Engineer-in-Charge. 79 Providing & Supplying Three Seater Leather Sofa Overall Size : Width: 134cm, Depth : 87cm, Height : 76cm, Seating Height : 39.5cm STITCHING: THREAD : Poly Proplin.LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 of PATRO godrej make or equivalent as per drawingand specification including cost of all material T&P, etc, complete as per the direction of Engineer-in-Charge. 80 Providing & Supplying of Center Table with Glass Top and wooden leg of Width: 100CM, Height: 45CM & Depth 65CM of Alice godrej make or equivalent as per drawingand specification including cost of all material T&P, etc, complete as per the direction of Engineer-in-Charge. 81 Providing & fixing Patachitra panneling. including all the cost of material & labour , t& p, taxes, etc complete and as per the direction of EIC/ architects. 82 Providing & fixing of THATCHED ROOF of minimum 45-degree pitch for water runoff, a minimum 175mm (7-inch) and maximum 250mm (10-inch) finished thatch thickness for water resistance and insulation. The structural timber must be CCA treated to specified standards, and the thatch itself must be well-compacted for durability including all the cost of material & labour , transportation etc complete and as per the direction of EIC. 83 MODULAR KITCHEN 84 TANDOOR VATTIWITH INSIDE CLAY POT WITH GAS FRIED Body & Top:- Top Underneath by40X40X5 thk.M.S. Angle Frame with rust proof paint, Covered by 16 S.W.G S.S. Sheet at Top Portion and Side Covered by18 / 20 S.W.G. S.S. Sheet with heavy duty 4” M.S. Wheel fittings. Inside clay pot. Insulation:- Glass wool Insulation. Others Fittings:- Fitted with Suitable heavy duty L.P.G. Burners, Needle Control Valve,with Heavy Duty M.S. Plate. 85 TANDOOR TABLEWITH 01 NO. BOTTOM SHELVE of Overall Size:- 600X800X900+150 Body & Top:- Top Underneath by 40X40X5 thk. M.S. Angle Frame with rust proof paint, Covered by 16 S.W.G S.S.Sheet at Top Portion and Bottom Shelve 18 / 20 S.W.G. S.S. Sheet. Leg:- Fabricatedfrom 40mmX40mmS.S.squarepipe with adjustable fibber built. 86 TWO BURNER COOKINGRANGE WITH ALL FITTINGS of Overall Size:- 1200X700X850+150 Body&Top:-TopUnderneathby40X40X5 thk.M.S.AngleFramewithrustproof paint,Coveredby16S.W.GS.S304 qualities Sheet at Top Portion and Side Covered by18 / 20 S.W.G. S.S. 304 quality Sheet with S.S. drip trays.Leg:- Fabricated from 40mmX40mm S.S. 304 quality square pipe with adjustable fibber built. Others Fittings:- Fitted with Suitable heavy duty L.P.G. Burners, Needle Control Valve, Pilot Lamp & copper pipe with Heavy Duty C.I. Pan Support. 87 SINGLE SINK UNIT of Overall Size:- 600X700X850+150Body & Top:- Top Underneath by 40X40X5thk. M.S. Angle Frame, Covered by 16S.W.G S.S 304 qualities Sheet at Top & Sink Bowl with Front Side (up-to Sink Bowl)Coveredby20S.W.G.S.S.304quality Sheet.Leg:- Fabricated from 40mmX40mm S.S. 304 quality square pipe with adjustable fibber built. 88 (2+1) CHINESE COOKING RANGE WITH ALL FITTINGS of Overall Size:- 1650X750X850+300 Pan-support Size:- Three Round Pan- supportBody & Top:- Top Underneath by40X40X5 thk.M.S. Angle Frame with rust proof paint, Covered by 14 S.W.G S.S.Sheet at Top Portion and SideCovered by18 / 20 S.W.G. S.S.Sheet with S.S. drip trays and drainage & Water spray System. OthersFittings:-Fittedwith Suitableheavy dutyL.P.G.Burners, Needle Control Valve,Pilot Lamp&copperpipewithHeavyDutyC.I.PanSupport. 89 SINGLE BURNERCOOKING RANGE WITH ALL FITTINGS of Overall Size:- 600X750X850+150Body & Top:- Top Underneath by 40X40X5 thk.M.S. Angle Frame, Covered by 16 S.W.G S.S Sheet at Top Portion and Side Covered by18 /20S.W.G. S.S. Sheet. Leg:- Fabricated from 40mmX40mm S.S. square pipewith adjustable fibber built.Others Fittings:- Fitted withSuitable heavy duty L.P.G.Burners, Needle Control Valve,Pilot Lamp & copper pipe with Heavy Duty C.I. Pan Support. 90 WORK / SIDE TABLE WITH 02NOS. BOTTOM SHELVE of Overall Size:- 1100X700X850+150Body&Top:-TopUnderneathby 40X40X5thk.M.S.AngleFrame with rust proof paint, Covered by16 S.W.G S.S 304 qualities Sheet at Top Portion and Bottom Shelve 18/20S.W.G.S.S.304quality Sheet. Leg:- Fabricated from 40mmX40mmS.S. 304 quality square pipe with adjustable fibber built. 91 DOSA HOT PLATE WITH THREE SIDE COVER & ALL FITTINGS of Overall Size:- 900X750X850+150Body & Top:- Top Underneath by 40X40X5 thk.M.S.AngleFrame,SideCovered by18 / 20 S.W.G. S.S. Sheet with Oil collector.Leg:-Fabricatedfrom40mmX40mmS.S.squarepipewithadjustablefibberbuilt. Others Fittings:- Fitted with Suitable heavy duty L.P.G RV Burners, NeedleControl Valve, Pilot Lamp & copperpipe with Heavy Duty 16mm M.S. Plate. 92 DOBLE DOOR UNDER COUNTER FREEZER of Overall Size:- 1500X700X850Body:-Fabricated from 40X40X5 thk. M.S.AngleFramewithrustproof paint, Top Covered by 16 SWG S.S. 304 qualities sheet. Out-side body Covered by20S.W.GS.S304qualitiesSheet and Inner Tank 22/24 S.W.G. S.S. 304 qualitySheet.SpringfittingsDoor with lock & Key Facility.Leg:-Fabricatedfrom40mmX 40mmS.S. 304qualitysquarepipewith adjustable fibber built.Insulation:- Puff Type Insulation Body & Door.CoolingSystem:-Copperpipecoiling with direct cooling System.Others Fittings:- Fitted with Emerson Make compressor, Heavy Duty Fan / Motor, Heavy Duty Condenser with Copper Coiling, Digital temperature controller display & On-Off Switchfittings. 93 OVER HEAD SHELEV FOR UNDER COUNTER FREEZER of Overall Size:- 1500X250X450+300All shelve 18SWG S.S. S.S. Sheet, Supporting Legs fabricated from 25mm dia. S.S. Pipe. 94 PICK-UP TABLE WITH 02NOS. BOTTOM SHELVE 95 Overall Size:- 600X700X850Body & Top:- Top Underneath by 40X40X5 thk.M.S. Angle Frame with rust proof paint,Coveredby16S.W.GS.S Sheet at Top Portion andBottom Shelve 18/20 S.W.G. S.S. Sheet.Leg:-Fabricated from 40mmX40mmS.S.squarepipe with adjustable fibber built. 96 PICK-UP TABLE WITH 02 NOS. BOTTOM SHELVE of Overall Size:- 1100X700X850Body&Top:-TopUnderneathby 40X40X5thk.M.S.AngleFrame with rust proof paint, Covered by 16 S.W.G S.S 304 qualities Sheet at Top Portion and Bottom Shelve 18/20S.W.G.S.S.304quality Sheet. Leg:-Fabricated from 40mmX40mmS.S. 304 quality square pipe with adjustable fibber built. 97 OVER HEAD SHELEV FOR UNDER COUNTER FREEZER of Overall Size:- 1100X250X450+300All shelve 18SWG S.S. S.S. Sheet, Supporting Legs fabricated from 25mm dia. S.S. Pipe. 98 04- DOOR FREEZER of Overall Size:- 1200X750X2000Body:-Fabricated from 40X40X5 thk. M.S.AngleFramewithrustproof paint,TopCoveredby16SWGS.S. sheet.Out-sidebodyCoveredby20 S.W.G S.S Sheet and Inner Tank 22/24 S.W.G.S.S.Sheet.Springfittings Door with lock & Key Facility.Leg:-Fabricatedfrom40mmX40mmS.S. squarepipewithadjustablefibber built.Insulation:- Puff Type Insulation Body & Door.CoolingSystem:-Copperpipecoiling with direct cooling System. Others Fittings:- Fitted with Emerson Make compressor, Heavy Duty Fan / Motor, Heavy Duty Condenser with Copper Coiling, Digital temperature controller display & On-Off Switch fittings. 99 DOUBLE DOOR DEEP FREEZER of Capacity:-500ltrs. VOLTAS / Western Make 100 TABLE WITH SINK & 01No. BOTTOM SHELVE 101 Overall Size:- 1500X700X850+150Body & Top:- Top Underneath by 40X40X5 thk. M.S. Angle Frame with rust proof paint,Coveredby16S.W.GS.S304 qualitiesSheetatTopPortionand BottomShelve18/20S.W.G.S.S.304 quality Sheet. Leg:- Fabricated from 40mmX40mm S.S.304 quality square pipe with adjustable fibber built. 102 DISH & POT WASHING AREA:- 103 3-SINK UNIT FOR PLATE WASHING Overall Size:- 1650X600X850+150Body & Top:- Top Underneath by 40X40X5 thk.M.S. Angle Frame with rust proof paint, Covered by 16 S.W.G S.S Sheet at Top & Sink Bowl with Front Side (up-to Sink Bowl) Covered by 20 S.W.G. S.S. Sheet. Leg:- Fabricated from 40mmX40mm S.S. square pipe with adjustable fibber built. 104 PRE RINSE UNIT.Deck Mounted Water Faucet / Shower System (Single) 105 4”- DEEP SOILDISH LANDINGTABLE WITH SOILHOLE & OVER HEAD SHELVE. Overall Size:- 1100X700X850+450+300Body & Top:- Top Underneath by 40X40X5 thk. M.S. Angle Frame with rust proof paint, Covered by 16 S.W.G S.S 304 qualities Sheet at Top Portion & Over head shelve 18 S.W.G. S.S. 304 quality Sheet & 25mmDia Pipe. Leg:- Fabricated from 40mmX40mm S.S. 304 quality square pipe with adjustable fibber built. 106 CLEANING DISH TABLE WITH 01NO. BOTTOM SHELVE of Overall Size:- 600X700X850+150Body & Top:- Top Underneath by 40X40X5 thk. M.S. Angle Frame with rust proof paint, Covered by 16 S.W.G S.S Sheet at Top Portion and Bottom Shelve 18/20 S.W.G. S.S. Sheet.Leg:- Fabricated from 40mmX40mm S.S. square pipe with adjustable fibber built. 107 SOIL DISH COLLECTION TROLLEY WITH 01NO. BOTTOM SHELVE of Overall Size:- 900X600X900Fabricated from 16/18 SWG 304 quality S.S. Sheet at top portion & Handle fabricated from 40mm dia. 304 quality S.S. Pipe with heavy duty wheel. 108 CLEAN DISH RACK WITH 04NOS. SHELVE of Overall Size:- 1100X450X1650Shelve:- Shelve Fabricated From 18 S.W.G. S.S 304 qualities Sheet.Leg / Supporting Stand:- Fabricated from 40mmX40mm S.S. 304 quality square pipe with adjustable fibber built. 109 POT RACK WITH 04NOS. SHELVE of Overall Size:- 1500X600X1950Shelve:- Shelve Fabricated From S.S. 20mm / 25mm square pipe.Leg / Supporting Stand:- Fabricated from 40mmX40mm S.S. square pipe with adjustable fibber built. 110 STORAGE RACK & OTHERS:- 111 S.S. STORAGE RACK WITH 04NOS. SHELVE FOR DRY STORE of Overall Size:- 1100X450X1650All Supporting Legs fabricated from S.S. Square pipe with adjustable fibber built and all shelve fabricated from 18 SWG M.S. Sheet. 112 VENTILATION SYSTEM:- Exhaust System 113 S.S. SUCTION HOOD WITH S.S. BAFFLE FILTER FOR COOKING RANGE TOP (CANTILEVER TYPE). Overall Size:-6600X900X450 Fabricated from 20/22 SWG S.S. 202Quality S.S. Sheet & S.S. Baffle Filter with Double frame for Suction Hood Fabricated from 24 SWG S.S. sheet. 114 AIR CONTROL DAMPER Overall Size:- 300X300X100Fabricated from 24 G.I. SWG sheet. 115 03 NEW G.I. DUCTING INSIDE & OUT-SIDE KITCHEN FOR EXHAUST SYSTEM Overall Size:- DifferentFabricated from 22/24SWG G.I. sheet. 116 5HP Centrifugal Fan WITH all FITTINGS 117 FRESH AIR :- NEW G.I. DUCTING INSIDE & OUT-SIDE KITCHEN FOR EXHAUST SYSTEM Overall Size:- DifferentFabricated from 22/24SWG G.I. sheet. 118 AIR ADJUSTABLE LUBBER AT AIR OUTLET POINT Overall Size:- 18X8Fabricated From 24SWG G.I. Sheet. 119 2HP AXIAL FLOW Fan WITH allFITTINGS 120 L.P.G SYSTEM:- MANIFOLD 5X2 =20Nos.CYLINDERS ofFabricated from 25 N.B. Seamless Sch.40 M.S. Pipe. 121 NON RETURN VALVE of H.P.C / Gaso Make 122 CYLINDER FLEXIBLE PIGTAIL of 24” Long Super seal / Surakha Make 123 CLICK-ON-ADAPTOR of Gaso Make 124 1st STAGE REGULATOR of 30 PSI, Venaz / Gaso Make 125 HAND SHUT-OFF VALVE of 25mm valve RV, Koria / Acron make 126 HAND SHUT-OFF VALVE of 20mm valve RV, Koria / Acron make 127 M.S. PIPE LINE of 25mm dia. Pipe line with tee, elbow, Socket etc Seamless scheduled 40 M.S. Pipe with Wall Clump. 128 M.S. PIPE LINE of 20mm dia. Pipe line with tee, elbow, Socket etc Seamless scheduled 40 M.S. Pipe with Wall Clump. 129 NEEDLE CONTROL VALVE of HPC / Gaso Make 130 M.S.ADAPTOR of size ¾” X ¾” & 1” X 1” 131 M.S. NUT & NIPPLE SETof size ¾” X ¾” & 1” X 1” 132 PRESSURE GAUGE WITH VALVE of 0 – 50 PSI 133 OVEN PIPE / OVEN PIGTAIL of 60” Long Super seal / Surakha Make 134 SPARK ARRESTOR FOR FIRE SAFETY of 1”X1”Venaz / Gaso Make 135 GAS LEAKAGE DETECTORof Model :-GT-07Victory Gas Alarm Company Make 136 PRESSURE TESTING & INSTALLATION CHARGE of Pressure Testing by Nitrogen 137 PATHWAY 138 Earthwork in excavation in all kinds of soil upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in following types of soil including moorum, hard stony earth, earth mixed with boulders, DI rocks etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 139 Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). 140 Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works(4th Revision) 141 Supplying & fixing of pre cast kerb stone of size 600mm x 300mmx150mm of M-30 grade of approved make desgin ,colour & size made by block making machine with proper compaction fixed in required pattern etc.complete in all respect conforming to IS 5758:1984. 142 Supplying and laying ofhydraulically pressed and mechanically compacted free cast interlocking UNI PAVERpavers of 80MMthick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 143 LANDSCAPE 144 Supply of good quality garden soil preferably red alluvial /sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity sufficiently porous for microbial activity, containing adequatehumus with a Ph range from 6.5 to 7.5 should be freefrom any undesirable inorganic materials like wastages of construction, roots and bushes of wild plants, polythene, garbage etc., including cost, conveyance, royalty etc. as per the direction of the EIC . 145 Lifting & spreading of good soil uniformly over the surface area as per landscape design etc. complete as per the direction of the EIC . 146 Supply of cow dung manure, well decomposed, garbage free includingincluding cost, conveyance ,loading, unloading etc. complete as per the direction of the EIC . 147 Lifting & Spreading of cow dung manure uniformly etc. complete as per the direction of the EIC . 148 Supplying & Turfingof Selection-1grass carpet of 2 thickwith well grown disease free grass including loading and unloading and delivery at site & Turfing of grass carpet including watering, rolling as per requirement etc. complete as per direction of Engineer-in-charge. 149 Supplying & Planting of Foxtail palm6’ htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 150 Supplying & Planting of Hedge plants kamini 16” ht.plants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 151 Supplying & Planting of Almonda 2½’ htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 152 Supplying & Planting of Plumeria 6 htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 153 Supplying & Planting of Ficus panda30” ht.plants (bushy type) of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 154 Supplying & Planting of Sampen palm50” ht.plants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 155 Supplying & Planting of Pandanus10” ht.plants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 156 Supplying & Planting ofBakul 6’ htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 157 Supplying & Planting ofSyngonium10’ htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 158 Supplying & Planting ofJuniper4’ htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 159 Supplying & Planting of Foxtail palm10’ htplants of well established ,healthy , disease free type transported with poly bag including cost of transportation ,loading / Unloading etc. , planting of each plant at specified location inluding cost of all labourfor earth work , application of Manure / fertilizer / pesticide etc as per requirement etc. complete in all respect as per the direction of the instruction of Engineer- in-charge. 160 WATER SUPPLY & SANITARY WORKS 161 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreousItalian floor mounted rimless one piecewash down European water closet of hindware make having Hindware Flora cat no 20107 or equivalent type of approved make including all fittings with supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 162 Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Full Pedestal wash hand basin of size 55x40x80cmof Hindware make NEO model having cat no - 10098 & Ped. - 11032 or equivalent type of approved make with 32mm dia waste pipe with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. 163 Supplying all materials, labour, T&P and fixing mirror of superior glassmounted on 6mm thick A.C sheet or plywood sheet and fixed to woodenplugs with CP screws and washers complete as per specification and direction of the Engineer in charge 164 Supplying all materials, labour, T&P and fixing standard sized15mm dia Angular Stop cock of Jaquar Cat. No.- FUS - 29053or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 165 Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Jaquar Cat. No.- FUS - 29083Kor equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 166 Supplying all materials, labour, T&P and fixing standard sizedWall Mixture of Jaquar Cat. No.- FUS - 29281or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 167 Supplying all materials, labour, T&P and fixing of 120mm dia CP overhead shower of Jaquar Kubix Cat. No.-OHS-1709 with arm SHA-477 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 168 Supplying all materials, labour, T&P and fixing standard sizedpillar cock of JaquarCat. No.-FUS - 29001 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 169 Supplying all materials, labour, T&P and fixing two way Bib cock of JaquarCat. No.- FUS - 29041or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 170 Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD-565 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 171 Supplying all materials, labour, T&P and fixing standard sizedCP towel rail - 24of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 172 Supplying all materials, labour, T&P and fixing standard sizedCP towel ring of Jaquar Cat. No.-ACN - 1121BN or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 173 Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Jaquar Cat. No.-AKP-35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 174 Supplying all materials, labour, T&P and fixing standard sizedCP Glass Shelf of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 175 Supplying all materials, labour, T&P and fixing standard sizedCP Paper Holder of Jaquar Cat. No.-AKP 35751P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 176 Supplying all materials, labour, T&P and fixing standard sizedCP Bib cock of Jaquar Cat. No.- FUS - 29037 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 177 Providing and fixingcircular type stainless steeljalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge 178 Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type)with all PVCfittings of Finolex /Prince/Supreme make as per IS 13592to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 179 160 mm dia 180 110 mm dia 181 90 mm dia 182 Providing and fixing UPVC pipes of Schedule-80 ( AJAY/ ASHIRVAD/ ASTRAL)including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 183 25 mm nominal outer dia Pipes 184 32 mm nominal outer dia Pipes 185 50 mm nominal outer dia Pipes 186 Providing and fixing UPVC fullwayvalve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects 187 25 mm dia 188 32 mm dia 189 40 mm dia 190 50 mm dia 191 Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 192 Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. 193 110mm dia Single Junction with door 194 100mm dia Double Junction with door 195 110mm dia Cowl 196 110mm dia Plain Bend 197 110mm dia SWR Door Bend 198 100mm dia End Plug 199 110mm dia Pipe clip 200 75mm dia Plain Bend 201 Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. 202 Construction of circular brick masonary manhole chamber of size 900x800x450mm including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M30 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. 203 Extra for ever additional depth of 100mm or part there of 900x800x450mm chamber 204 Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) 205 150mm Dia 206 SIGNAGES 207 Fabrication, supply and fixing of informatory retro reflective signboards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white color bonded on to 3mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unberals are reverse cut made using Electro cut able film with comuterized cuttng plotter/DIGITAL PRINTING SYSTEM the board shall be provided with frame mode out of stainless steel pipes of 304 grade. it shall be maunted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/reveling, etc necessary for fixing fo the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges all taxes etc complete in all respect as per specification & direction of Engineer-in-Charge. 208 a) Required retro reflective boards of white, yellow, green, blue , brwon colour with necessary signage as per specification & direction of Enginner-in-charge 209 New board -5x6-0x4-0= 210 b) Required stainless stell frame of 80mm NB made out of 304 grade steel pipe including cost, all taxes , transportation complete as per specification & direction of Engineer-in-Charge. 35Kg per Signage 211 5x35kg 212 Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using Portland slag cement (PSC) with 12mm size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleared including hoisting, lowering, laying corncrete, ramming, watering and curing etc complete to required levels laid in layers not cxceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalities an dtaxed all materials and cost of all labours, sundries T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specifiation and direction of Engineer-in-Chrge. (0.45x0.45x0.63 = 0.1275) x2= 0.255 Cum Per Nos 213 PHOTOGRAPHY ZONE 214 Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. 215 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 216 Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). 217 Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. 218 Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 219 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 220 Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted pre-cast interlocking pavers of 80mm thick,preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 221 Providing and Fixing white fiber made Selfie point ( I Love GETANJALI RESTAURANT of 4 feet height )as per design and specification with artifical tree and seven numbers wild Monkey on it as per the direction of The architect 222 Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 223 Providing 20mm thick of above 0.40 Sqm granite tile flooring of approved quality, colour and size in dado/skirting , riser of stepsin all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 224 Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 225 INTERNAL WIRING. 226 Recessed / Surface wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq) 227 GROUP-A 228 GROUP-B 229 GROUP-C 230 Recessed / Surface wiring to secondary light pointlooped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Polycab/ Anchor / Havels/Eq)Average Length: 3mtr 231 Recessed / Surface wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Polycab/ Anchor / Havels/Eq)Group c 232 Recessed / Surface wiring to Twin control light pointwith 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Polycab/ Anchor / Havels/ Finolex/Eq)Group C 233 Supply and fixing of 5 / 6 amp socket outletwith6 Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer-in-charge. 234 Recessed / Surface wiringfor 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Polycab/ Anchor / Havels/ Finolex /Eq) 235 Supply and fixing of2 x 6 amp socket outlet controlled by 2 nos6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer-in-charge. 236 Supply and fixing of1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer-in-charge. 237 Supply and fixing of 6 pin 16 amp socket outletwith 16 Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer-in-charge. 238 Supply and fixing of 6 pin 16 amp socket outletISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer-in-charge. 239 Supply and fixing of 32 amp Modular DP switchISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer-in-charge. 240 Recessed wiring of modular type 1500mA, 5V Type-A USB CHARGER 1M with 6A 250V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size, including all accesories and connection on existing switch board as per direction of Engineer in Charge.(Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) 241 Supply and fixing of A.C/ Power socket outletwithindustrial type socket outlet,plug top and metal chained cover in sheet steel enclosure, 20A /32A SP MCBincluding all accesories and connection as per direction of Engineer-in-charge. 242 Supply and fixing of TV / Telephone Socket outletISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer-in-charge. 243 Supply and fixing of3 x 6 amp socket outlet controlled by 2 nos6 Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer-in-charge. 244 SUBMAIN WIRING. 245 Recessed / Surface wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) 246 Recessed / Surface wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) 247 Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) 248 Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy dutyconduit.(2X6+1X2.5) 249 Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy dutyconduit.(4X4+1X2.5) 250 Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy dutyconduit.(4X6+1X2.5) 251 Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSinsulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE inrecessed HMS FRLS PVCconduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 10 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy dutyconduit.(4X10+1X4) 252 DISTRIBUTION BOARD 253 Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid tripposition for toggles for electrical fault conditions.(With 2 Years Warenty) 254 Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-63Amp / 40AmpFPMCB (10KA)Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) 255 Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted4 way Vertical TPN Distribution Boardssuitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100AFPMCCB (25KA)Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) 256 FITTING & FIXTURE 257 Supply, Installation, Testing and Commissioning of Plastic body Exhaust fan200 mm sweep 900 rpm with louversof approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj). 258 Supply, Installation, Testing and Commissioning of Metal body Exhaust fan380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj). 259 Supply, Installation, Testing and Commissioning of 1200 mm sweep 4 blades Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-Havells Florence/Crompton /Usha/Orient /Bajaj). 260 Supply, Installation, Testing, and commissioningofdecorativeWallfan300mm sweep,110watt,230/250volts,50HZ complete with suitable, clamp, downrod (as persiterequirement),blades,canpoy, rubber, shackle, and connections with 1.5 sq.mmPVCinsulatedcopperconductorcable etc as required of approved make complete withallmaterials&labourasrequiredasper thedirectionofEngineer-in-Charge. ( Make- Havells/Crompton /Usha/Orient /Bajaj) 261 Supply, Installation, Testing, and commissioningofdecorative pedestalfan 450mmsweep,120watt,230/250volts,50HZ complete with suitable, clamp, downrod (as persiterequirement),blades,canpoy, rubber, shackle, and connections with 1.5 sq.mmPVCinsulatedcopperconductorcable etc as required of approved make complete withallmaterials&labourasrequiredasper the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/Crompton /Usha/Orient /Bajaj) 262 SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories withdiffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 263 SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 10 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories withdiffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 264 SITC of9 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 265 SITC of12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 266 SITC of 3 watt LED Ceiling Recessed mounted spot light in different Colour Aesthetically designed lens based of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 267 SITC of LED Strip light, IP65 protection of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 268 SITC of18 watt LED Ceiling Surface mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). 269 Supply, Installation,Testing & commissioning ofDecorative Vega Outdoor wall light, Metal glass , Bronze finish, Holder & Plug Type E27 , Dimensions of Light: 26 X 19 X 52 CM ; Canopy: 12 X 28 CM of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Vega / Eqivalent) 270 Supply, Installation,Testing & commissioning of 2W Anthracite LED Step/ Foot Light of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.( Make - Phillips 34151/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) 271 Supply, Installation,Testing & commissioning of 9W LED Integrated wall Light ( Mirror Light) of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.( Make - Phillips 581916/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) 272 Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) 273 CCTV SYSTEM 274 Supply of 4 MP IP Audio Dome Camera (20 Mtr IR ) (Inbiult Audio with Color Night Vision) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell) 275 Supply of 4 MP IP Audio Bullet Camera (20 Mtr IR) (Inbiult Audio with Color Night Vision) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell) 276 Supply of 16 Channel NVR (2 SATA Port ) (Upto 8 Mega Pixel Camera Supported) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell) 277 Supply of 4TB Surveillance Hard Disk etc complete of approve make as per the direction of Engineer-in-Charge.( Make - WD/ Seagate) 278 Supply of 16 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Hikvision) 279 Supply of 8 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make -Tyco / Hifocus / Digisol/Hikvision) 280 Supply of 9U Network Rack (Server Room) Includes PDU , FAN and Cantilever Shelf Tray of approve make as per the direction of Engineer-in-Charge.( Make -CP Plus/ Tyco / Legrand / Digisol/Dlink) 281 Supply of 4K HDMI Cable 5 Mtr long of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Honeywell) 282 Supply & Laying ofCat-6 Cable with PVC Pipe and casing of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Legrand / Panduit /D Link/ Digisol) 283 Installation Testing & Commissioning of CCTV System etc Complete. 284 Supplying, installation, testing & commissioning of 43 Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony) 285 SAFETY EQUIPMENTS 286 Providing and fixing carbon-di-oxide type 4.5 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed towall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire 287 Providing and fixing ABC type 6 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed towall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire 288 Supply and installation of Rubber Mats 12mm thick of size 2000 mm x 1000mm x 12 mm thick Electrical tested with test certificate. 289 Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. 290 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. 291 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 292 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 293 Providing and fixing Main Fire Alarm Control Panel - 4 zone with all necessory accesorries ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.. 294 Electrical Gadgets 295 Supplying, Installation, Testing & Commissioning of 2 Ton Tower AC machine ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin) 296 Supplying, Installation, Testing & Commissioning of Extra Refrigeration Copper pipe with insulation & drain pipe ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 297 Supplying, Installation, Testing & Commissioning of Hi-wall 2 Ton Split AC of 5 Star Rating ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge.(LG/Voltas/Bluestar/ Carrier /Daikin) 298 Supplying, Installation, Testing & Commissioning of 5 Kva wall hanging Stablizer ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. (Vguard /Voltas/Sakti) 299 Supplying, Installation, Testing & Commissioning of Out door stand for fixing of Out door unit ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 300 Supplying, Installation, Testing & Commissioning of Concealed Light Chandeliers Color: Gold, Material: Brass, No. of heads: 12, Cap type: E14, Wattage: 12 x 4.5 W LED, Dimension (mm): Ø 610 x H 920, Weight (Kg): 20.5 ofapproved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. (Jaquar - Nobella / Equivalent) 301 External Illumination 302 Supplying, installation and commissioning of 12 W LEDVerbena Square Bollard light 1000 mm long. Body : Square Aluminium Tube,Mounting : Surface - FloorFinish : Powder coated etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: K- Lite KL-4735/Havells / BAJAJ/ CG/ Jaquar). 303 Supply of 8 mtrlong single arm hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos.En 8 grade foundation bolts to withstand basicwind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge. 304 Supply, installation, testing & commissioning of 3050 mm long decorative lighting pole with mild steel body step pole with grey/black powder coting fnish. The control gear tray made up off diecast alluminium body & prewired with 2.5 sqmm copper cable, 6 Amp SP MCB, 32 Amp 4 pole connector, 5 Amp 3 way terminal connector & earthing point. The Pole shall have base Plate of size (200x12) mm with provision for founation bolt fittings.Compatible for all suitable size for cable entry & exist as required of approved make with all materials & labour as per the direction of Engineer-in-Charge.(Make: K- Lite Flat Series KP-4786/ Havells / BAJAJ/CG/Jaquar). 305 Supply, installation, testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge. 306 Supply, installation, testing & commissioning of 30 watt LED post top light fittings integrated with LED Modules, Clear Polycarbonate optical cover, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: K -lite Avira KL- 4976/ Havells / BAJAJ/CG/Jaquar). 307 Supply, installation, testing & commissioning of 10 watt LED 2 Way Wall light fittings integrated with LED Modules, Protection class IP 65, Integral power supply, Earth connection, BIS Mark as required of approved make etc complete with all materials & labour as per the direction of Engineer-in-Charge. (Make: Phillips - 31450 /K -lite / Havells / BAJAJ/CG/Jaquar). 308 Supply, installation, testing & commissioning ofIP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body havingin built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 309 Supplying, storing, laying, testing and commissioning of 3 c x 4 Sq. mmarmoured Copper Cable direct in groundincluding excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 310 Supplying, storing, laying, testing and commissioning of 2c x 6 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 311 Supplying, storing, laying, testing and commissioning of 4c x 16 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labour of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. 312 Supplying, storing, laying, testing and commissioning of 3.5 c x 35 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 313 Supplying, storing, laying, testing and commissioning of 3.5 c x 70 Sq. mm A2XFY Al armoured Cable1100 Voltsetc. as required of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 314 Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp,C.T , Digital Voltmeter,Digital Ammeter and control fuse etc. complete. MAKE- Legrand / Schneider/Hager/ L&T/SIEMENS/Eq. 315 Main Panel 250 Amp 4 P MCCB 25 KA -1 No, 160 Amp 4P Changeover - 1 no as incomer, 125 Amp 4P MCCB 10 KA -3 nos, 63/80 Amp 4P MCCB 10 KA- 3 Nos, 63/40 Amp 4P MCB 10 KA 2 Nos, , 32 Amp DP MCB 10 KA -2 Nos with copper busbars 4nos of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 316 Supply, installation,testing & commissioning of 63 Amp, DB with IP65 made of environment friendly polycarbonate PC- GFS insulation enclosed indoor electrical panel board as power switch gear and control gear assembly (PSC) in accordance with IEC 61439-2 for wall mounting/floor mounting Part No. HEN MI LDB - 1086 - 2024 The enclousers must be suitable for outdoor installation harsh environment and/ or outdoor installation- The climatic effects on the equipment’s must be considered. Bottom parts and lids of the boxes made from impact resistance polycarbonate, halogen and silicon free colour RAL7035, transparent lid with quick action fastners for tool operation. Burning behaviour according to IEC60695-2-11 glow wire test + 960 degree C. Maximum water absorption 10mg in accordance with DIN53473. Protective measures: Totally insulated (protection classII), the enclosure should have mechanical strength equivalent to IK10.Incomer:63Amp, FP, MCCB,25kA-1no Outgoing:40Amp,DP MCB 10kA-2No, 20Amp, DP 10kA,MCB-3 Outdoor/wall Mounting of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. (Hansel / Equivalent 317 Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 318 Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 319 Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labouras required as per the direction of Engineer-in-Charge. 320 Supplying, storing, laying and commissioning of 40 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge. 321 Supplying, storing, laying and commissioning of 63 mm dia HDPE pipe etc as required of approved make complete with all materials & labour as per the direction of Engineer-in-Charge. 322 62.5 KVA DG SET 323 Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 62.5KVA ( Make -Kirloskar / Jakson) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB norms etc as per following specifications mentioned below.Warrentee period of panel must be 2 years ALTERNATOR:- The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. ENGINE:- Diesel Engine start, developing suitableBHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 62.5KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.01. Exhaust pipe of required size and length with insulation or clading.02. Diesel tank suitable for 8 to 12 Hours running capacity.03. Industrial Silencer.04. SMF Batteries with leads as per the Manufacturer standards, AMF PANEL:- Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors,for both main & dg along with battery charger,relay,timer & all required accessories, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 62.5KVA DG Set complete with Battery Charger & leads as requiredBASE PLATE:- Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required.

INR 10000 /-

INR 1.55 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB