Notice Inviting Tender (Nit) For Annual Maintenance Contract For Civil Works In Township And Other Areas Of Ttps For Talcher Thermal Power Project Located At Deepashikha, Po/Ps-Angul, Odisha-SCHEDULE ITEMS (CIVIL WORKS) 10 .10 CVDSR1801001 DSR-2018 Item: 1.1.1(i) Carriage of building rubbish upto-1km 10 .20 CVDSR1801009 DSR-2018 Item: 1.1.2(i) Carriage of earth upto-1km 10 .30 CVDSR1802006 DSR-2018 Item: 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / Manual means over areas (exceeding 30cm in depth. 1.5 m in width As well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be leveled and neatly dressed : All kinds of soil 10 .40 CVDSR1802010 DSR-2018 Item: 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan): All kinds of soil. 10 .50 CVDSR1802052 DSR-2018 Item: 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 10 .60 CVDSR1804002 DSR-2018 Item: 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) 10 .70 CVDSR1804006 DSR-2018 Item: 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size). 10 .80 CVDSR1804024 DSR-2018 Item: 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). 10 .90 CVDSR1805001 DSR-2018 Item: 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 10 .100 CVDSR1805002 DSR-2018 Item: 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : R.C.C(1:2:4) 10 .110 CVDSR1805003 DSR-2018 Item: 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 10 .120 CVDSR1805004 DSR-2018 Item: 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 10 .130 CVDSR1805010 DSR-2018 Item: 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. 10 .140 CVDSR1805011 DSR-2018 Item: 5.9.2 Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 10 .150 CVDSR1805012 DSR-2018 Item: 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. 10 .160 CVDSR1805014 DSR-2018 Item: 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumer and cantilevers. 10 .170 CVDSR1805015 DSR-2018 Item: 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts. 10 .180 CVDSR1805029 DSR-2018 Item: 5.9.19 Centering and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including edges. 10 .190 CVDSR1805037 DSR-2018 Item: 5.12 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). 10 .200 CVDSR1805054 DSR-2018 Item: 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level: - Thermo-Mechanically Treated bars of grade Fe-500D or more. 10 .210 CVDSR1808005 DSR-2018 Item: 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab up to 0.50 sqm 10 .220 CVDSR1808006 DSR-2018 Item: 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm 10 .230 CVDSR1808070 DSR-2018 Item: 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, Including pointing in white cement mixed with pigment of matching shade complete. 10 .240 CVDSR1809002 DSR-2018 Item: 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood 10 .250 CVDSR1809056 DSR-2018 Item: 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : Stainless Steel butt hinges 35mm thick 10 .260 CVDSR1809057DSR-2018 Items: 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 10 .270 CVDSR1809058 DSR-2018 Item: 9.21.3 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 10 .280 CVDSR1809092 DSR-2018 Item: 9.47.1 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets: 20 mm dia (heavy type) 10 .290 CVDSR1809094 DSR-2018 Item: 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete: Fixed to steel windows by welding 10 .300 CVDSR1809095 DSR-2018 Item: 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete: Fixed to openings /wooden frames with rawl plugs screws 10 .310 CVDSR1809129 DSR-2014 Item: 9.62.1 Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm 10 .320 CVDSR1809138 DSR-2018 Item: 9.66.1 Providing and fixing ISI marked oxidized M.S. handles conforming to IS: 4992 with necessary screws etc. complete: 125 mm 10 .330 CVDSR1809139 DSR-2018 Item: 9.66.2 Providing and fixing ISI marked oxidized M.S. handles conforming to IS: 4992 with necessary screws etc. complete: 100 mm 10 .340 CVDSR1809184 DSR-2018 Item: 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm) with necessary accessories and screws etc. complete. 10 .350 CVDSR1809185 DSR-2018 Item: 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 10 .360 CVDSR1809193 DSR-2018 Item: 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 10 .370 CVDSR1809215 DSR-2018 Item: 9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm 10 .380 CVDSR1809216 DSR-2018 Item: 9.96.2 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm 10 .390 CVDSR1809217 DSR-2018 Item: 9.97.1 providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868): 300x10 mm 10 .400 CVDSR1809218 DSR-2018 Item: 9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868): 250x10 mm 10 .410 CVDSR1809224 DSR-2018 Item: 9.100.1 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm 10 .420 CVDSR1809225 DSR-2018 Item: 9.100.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete: 100 mm 10 .430 CVDSR1809227 DSR-2018 Item: 9.101.1 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete: Single rubber stopper 10 .440 CVDSR1809228 DSR-2018 Item: 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete: Twin rubber stopper 10 .450 CVDSR1809256 DSR-2018 Item: 9.117.1 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-in-Charge. Extruded section profile size 48x40 mm 10 .460 CVDSR1809256 DSR-2018 Item: 9.118.3 Providing and fixing to existing door frames: -25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 10 .470 CVDSR1810001 DSR-2018 Item: 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10 .480 CVDSR1810002 DSR-2018 Item: 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10 .490 CVDSR1810003 DSR-2018 Item: 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 10 .500 CVDSR1810005 DSR-2018 Item: 10.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer: Using M.S. angels 40x40x6 mm for diagonal braces. 10 .510 CVDSR1810008 DSR-2018 Item: 10.6.2 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover 10 .520 CVDSR1811004 DSR-2018 Item: 11.3.1 Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete:- 40mm thick with 20mm nominal size stone aggregate. 10 .530 CVDSR1811053 DSR-2018 Item: 11.20.4 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment. 10 .540 CVDSR1811079 DSR-2018 Item: 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. 10 .550 CVDSR1811081 DSR-2018 Item: 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete 10 .560 CVDSR1411085 DSR-2018 Item: 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 10 .570 CVDSR1812056 DSR-2018 Item: 12.31.1 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces 10 .580 CVDSR1812070 DSR-2018 Item: 12.41.1 Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes:-75 mm diameter 10 .590 CVDSR1812071 DSR-2018 Item: 12.41.2 Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes:-110 mm diameter 10 .600 CVDSR1812072 DSR-2018 Item: 12.42.1.1 Providing and fixing on wall face un plasticised - PVC moulded fittings/ accessories for un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler: - 75 mm diameter 10 .610 CVDSR1812073 DSR-2018 Item: 12.42.1.2 Providing and fixing on wall face un plasticised - PVC moulded fittings/ accessories for un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler: - 110 mm diameter 10 .620 CVDSR1812080 DSR-2018 Item: 12.42.5.1 Providing and fixing on wall face un plasticised - PVC moulded fittings/ accessories for un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5°: - 75 mm bend 10 .630 CVDSR1812081 DSR-2018 Item: 12.42.5.2 Providing and fixing on wall face un plasticised - PVC moulded fittings/ accessories for un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5°: - 110 mm bend 10 .640 CVDSR1812082 DSR-2018 Item: 12.42.6.1 Providing and fixing on wall face un plasticised - PVC moulded fittings/ accessories for un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Shoe (Plain): - 75 mm shoe 10 .650 CVDSR1812083 DSR-2018 Item: 12.42.6.2 Providing and fixing on wall face un plasticised - PVC moulded fittings/ accessories for un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Shoe (Plain): - 110 mm shoe 10 .660 CVDSR1812084 DSR-2018 Item: 12.43.1 Providing and fixing un plasticised -PVC pipe clips of approved design to un plasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:-75mm 10 .670 CVDSR1812085 DSR-2018 Item: 12.43.2 Providing and fixing un plasticised -PVC pipe clips of approved design to un plasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete:-110mm 10 .680 CVDSR1812096 DSR-2018 Item: 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 MPA steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester topcoat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineering- charge. The sheet shall be fixed using self-drilling /selftapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 10 .690 CVDSR1813002 DSR-2018 Item: 13.1.2 12 mm cement plaster of mix: 1:6 (1Cement: 6 fine sand) 10 .700 CVDSR1813004 DSR-2018 Item: 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1Cement: 6 fine sand) 10 .710 CVDSR1813014 DSR-2018 Item: 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 (1cement: 4 fine sand) 10 .720 CVDSR1813025 DSR-2018 Item: 13.16.1 6 mm cement plaster of mix: 1:3 (1cement: 3 fine sand) 10 .730 CVDSR1813064 DSR-2018 Item: 13.42.1 Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturers specification: -Two or more coats on new work. 10 .740 CVDSR1813068 DSR-2018 Item: 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) 10 .750 CVDSR1813092 DSR-2018 Item: 13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 10 .760 CVDSR1813093 DSR-2018 Item: 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 10 .770 CVDSR1813102 DSR-2018 Item: 13.69.1 Polishing on woodwork with ready mixed wax polish of approved brand and manufacture: New work 10 .780 CVDSR1813114 DSR-2018 Item: 13.80 Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 10 .790 CVDSR1813129 DSR-2018 Item: 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 10 .800 CVDSR1813142 DSR-2018 Item: 13.98.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. etc
