Tender For Comprehensive Maintenance At Dharmund Mil Stn Under Age (I) Bhalra.; 1 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises outside Cantt area complete all as specified and directed by Engineer-in-Charge. 2 M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laidbeddedand pointed in any mortarcomplete all as specified and directed. 3 M & L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . 4 M & L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in skirting etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed . 5 M & L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . 6 M & L for Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. 7 Vitrified light shade ceremic tiles 600mmx600mmx 10mm thick (Square/rectangular) polished in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over& including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed. 8 Vitrified light shade ceremic tiles 600mmx600mmx 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqmin skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over& including 10 mm thick rendering in cement mortar 1:4, complete all as specified & directed. 9 M & L for Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & likeincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer including rounding/bull nose to expose edge , complete all as specified and directed. 10 M & L for Machine cut Kota stone slab flooring not less than 18-20mm thick (size of stone shall not less than 55cmx55cm) with 75mm wide white marble border alround, laid over & including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine,complete all as specified and directed. 11 Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over& including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified and directed. 12 M&L for precast designer coloured Endura tiles with glossy finish (factory made rectified) of size 300mmx300mmx10mm, top layer glazed made in any type of cement and pigment, in required patterns in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for layingfloor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 13 M&L for cement concrete type C-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub-base to floors,complete all as specified & directed. 14 Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. 15 M&L for Brickwork with Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed. 16 All as per Srl item No 15 here-in-before but except bricks. 17 Taking down cement or cement limeplaster of any description on brick or stone walls, ceiling including rakingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. 18 M&L for rendering 15mm thick cement plaster in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. 19 M & L for 10 mm thick rendering onfair faces or brick work or concretesurfaces in cement mortar 1:6 surface finished even and smooth (with out using extra cement) 20 M & L for preparing newly plastered orunplastered surfaces of wall and applying two coats of white wash complete all as specified and directed. 21 M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge. 22 M&L for preparation ofold decorated plasteredsurfaces of walls including cornices bywashing ,rubbing down and stopping of distempered and painted surfacessmokesoot,moulds, moss and effloresnt salt and trading oil or greasy spots etc, and applying onecoats of cement base paint complete all as specified and directed by Engineer-in-Charge. 23 M & L for preparation ofold decorated plasteredsurfaces of walls including cornices bywashing ,rubbing down and stopping of distemperedsurfaces of walls and applying one coat of oil bound distemper white or tinted complete all as specified and directed. 24 Demolition of cement concrete any description (unreinforced) in ground floors and pavings not exceeding 15 cm in thickness all (below or above ground level) as specified and directed by Engineer-in-Charge. 25 M&L 75mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protectionlaid in alternate bays finished even and smooth without using extra cement incl form work complete all as specified and directed by Engineer-in-Charge. 26 25 mm thickplain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded stone aggregate) as in sub bases of floors rough finished complete all as specified and directed by Engineer-in-Charge. 27 Dismantling of plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings, ridges, hips , valleys and flashings complete all as specified and directed by Engineer-in-Charge. 28 Dismantling timber scantling 40 sq cm and over in section ,in any position etc complete all as specified & directed 29 Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engineer-in-Charge. 30 S & F rolled section conforming to Fe-290 (Gde E-165) as inpurlins,rafter,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete all as specified and directed. 31 Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. 32 Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. 33 PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching,floor by maintaing required gradient/undulation etc slightly rounded or chamferred angles and throating, including necessary formwork complete all as specified and directed by Engineer-in-Charge. 34 M&L for preparation of new steeland iron surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of red oxide zinc chromeprimer complete all as specified and directed. 35 M&L forpreparation of old painted steel surfacesof any description, over 10cm in width or girth,not otherwise describedand applying one coat of synthetic enamel paint all as specified and directed. 36 Dismantling of wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets including removal of Debries outside Cantt area complete all as specified and directed by Engineer-in-Charge. 37 M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete.Note :- Invoice from company’s authorized dealer shall be submitted with material by the contractor along with dealership certificate.Certificate of genuineness from the manufacturer shall also be submitted by the contractor before getting the material passed. 38 S&F PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling all as specified and directed. 39 S&F PVC Louverspanel made up of PVC panels 15cm in width and 23mm thickness fluted type interlocking pattern of approved shade and design fixed to wall all as specified and directed.Note :- Material manfactured by MES approved firms / ISI approved firms shall only be used in the work. 40 S&F 5mm thick PVC sheet corner fillet of width 35mm for opening wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. 41 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each all as specified and directed. 42 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each all as specifed and directed. 43 Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge. 44 Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the sameor other opening complete all as specified and directed. 45 S&F factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, suppling & fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge. 46 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing and as directed by the Engineer-in-Charge. 47 S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of primer complete as specification all as specified and directed. 48 S & F Pressed steel frames for doors of size 125 x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of primer complete as specification all as specified and directed. 49 S&F for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treatedcomplete all as specified and directed. 50 S&F2nd class hardwood glazed andskeleton doorshutters 35mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and directed. 51 S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 52 M&L for preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. 53 M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. 54 M&L for taking down existing Aluminium door/window and refixing to the same opening after repairing, easing and adjusting incl replacement of damaged hinges, brass mortice lock, sheet glass, door closer, Elco Panel , floor spring, rubber neoprene packing, aluminium beading, glazing clips and stainless steel screws complete all as specified and directed. (Mortice lock, sheet glass, hydraulic door closer, floor spring and composite panel to be measured and paid seperately under supply only). 55 S&FAnodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. having minimum thickness of powder coating 50 micronincl taking down complete all as specified and directed. 56 S&FAnodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.incl powder coating of any colour not less than 50 micron thickness complete all as specified and directed. 57 S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl Powder Coatingof minimum thickness of powder coating not less than 50 microncomplete all as specified and directed. 58 Supply only Aluminium( extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified and directed. 59 Supply only Sheet glass 4.8mm thick ,ordinary quality fixed with aluminium beading and rubber gasket exc 0.50 sqm each. all as specified and directed. 60 Supply onlyfor Aluminium 4 Lever Mortice lock, vertical type of size 100mm complete all as specified and directed. 61 Supply only for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. all as specified and directed. 62 Supply only 4mm thick Aluminium composite panel for fixing to Aluminium shutter and the like squares with aluminium beading/gasketc complete all as specified and directed. 63 S&F in repairs pre-laminated lead free factory made 12mm (+/- 0.7mm)thick 100% solid NFC (Natural fiber composite) sheet having high natural fiber content 25 to 30% wood colour sheet having density not less than 600kg/cum and should be 100% termite/water proof, fire retardant, eco friendly,finish at all edges for making edges lipping/bending, manfactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed.Note :- Material manfactured by MES approved firms / ISI approved firms shall only be used in the work. IS certified along with MTC to be produced before execution of work. 64 M&L for plaincement concrete type C-0 (1:3:6) using 12.5 mm aggregate as in filling to pressed steel frames, complete all as specified and directed by Engineer-in-charge. 65 S&F Butt hinges of size 100mm length, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type C-21complete all as specified and directed by Engineer-in-charge. 66 S&F Aluminium, anodized, barrel tower bolts 150mm extruded section complete all as specified and directed by Engineer-in-charge. 67 S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed by the Engineer-in-Charge. 68 Supply and fixing aluminium alloy sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia and including a minimum of 6 bolts and nuts,four on bolt type and two on staple plate 250 mm long complete all as specified and directed by Engineer-in-Charge. 69 Supply and fixing floor door stopper 150mm length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge. 70 Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs, clips and providing and fixing new onces exc 1.5 Sqm complete all as specified and directed. 71 S&F in repairs3 mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in squaren exc 0.5 sq.m in each pane including hacking out old glass of any description, complete all as specified and as directed by the Engineer-in-Charge. 72 S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty/wooden beading/rubber packing around the glass in square exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge. 73 S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks, or galvanised wire staples wire complete all as specified and directed by Engineer-in-Charge. 74 S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks, or galvanised wire staples wire complete all as specified and directed by Engineer-in-Charge. 75 Supplied and fixedRotational moulded polyethlene water storage tanks three layered of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) white in colour hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. 76 Supplied and fixedRotational moulded polyethlene water storage tanks three layered of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) white in colour hoisted and fixed in position all as specified in SSR Part I including 25mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. 77 S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 210gms)complete all as specified and as directed by the Engineer-in-Charge. 78 Taking up or down steel water tubing and connections 15mm bore complete all as specified and directed by Engineer-in-Charge. 79 Supply and fixing medium grade 15mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. 80 Taking up or down steel water tubing and connections 20mm bore complete all as specified and directed by Engineer-in-Charge. 81 Supply and fixing medium grade 20mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. 82 Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed by Engineer-in-charge. 83 S&F in repair 15 mm dia gun metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. 84 S&F in repair 20 mm dia gun metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. 85 S&F in repairs CP bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm borecomplete all as specified and directed. 86 S&F in repair CP angle or plain stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed. 87 S & F in repair 15mm bore Pillar taps cast copper alloyfancy type with capstan heads chromium plated screwed down high pressure with or with out lettred Hot or Cold with long screwed shanks and flynuts ,screwed for pipes and fixing all as specified and directed by Engineer-in-Charge. 88 S&F in repairs 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified anddirected. 89 S&F in repair 10 litre PVC valve less symphonic action type Low levelflushing cistern with inlet ball valve float and handle incl CIbracketand 32mm bore PVC flush pipe and connection to pipe complete all as specified anddirected. 90 S&F in repairsTowel rail 450mm long of PTMT fixed with and including chromium platedbrass screws and wooden/plastic cleatscomplete all as specified anddirected. 91 S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 92 Supply & fixed CP Brass shower rose 200x200 mm size with with flexible brass arm 450-550mm long for 15 mm bore pipe complete all as specified and directed by Engineer-in-charge. 93 Supply and fixed Soap dish Stainless steel finish,fixed to plugs with CP brass screws complete all as specified and directed by Engineer-in-charge. 94 S&F in repairs vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. 95 S&F in repairs Wash down water closet (Pedestal pattern), complete ,incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. 96 S&F in repairs One piece EWC with slim seat cover & fittingscomplete ,incl provision of cement concrete bedding, CI ‘P or S’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. 97 S&F in repairsvitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified. 98 Supply & fixed ,Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing ofCP coupling, waste pipe and cp brass spreder all necessary fittings, complete all as specified and directed. 99 S&F in repairsplastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge. 100 S&F in repairs 32mm borePVC flexible waste pipe for WHB complete all as specified and as directed. 101 S&F CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m longLongFlexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. 102 S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated bars screws and cup washers complete all as specified and directed. 103 S & F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down and removingfromsite completeallasspecifiedanddirectedbyEngineer-in-Charge. 104 S&Finrepair110 mmborePVC (SWR ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincluding taking down and removingfromsite completeallasspecifiedanddirectedbyEngr - in- charge. 105 M&L in repairsDiameter of outlet in 75mmPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 106 S&F PVC SWR110mm bends, complete all as specified and directed. 107 S&F for CP Central hole wash basin mixer without popup waste system with 450mm long braided hoses cast copper alloyfor iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed. .
