|
| 1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per directionof Engineer-in-charge, upto 90 metre depth below ground level. All types of soil (400 mm dia) |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 300 metre depth below ground level. All types of soil (400 mm dia) |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwedand socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness 5.40 mm (Make Tata, Jindal, Apollo) |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (havingslot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia having minimum wall thickness 5.40 mm (Make Tata, Jindal, Apollo) |
| 5 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge |
| 6 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (bwith zero tolerance as water used for drinking purpose, no sand contenet will be allowable), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 7 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia |
| 8 | Providing and fixing G.I. pipes B Class complete with G.I. fittings includingall complete aspects as per direction of Engineer-in-charge80 mm dia nominal bore (Make Tata, Jindal, Apollo). It includes flange welding with gasket, including trenching and refilling, dismantling road, concreting, etc. |
| 9 | Earth work in excavation by mechanical means(hydraulic excavator)/manual means in foundation, trenches of drains at all levels, depth, lifts etc including dressing of sides and ramming of bottoms lift , including getting out the excavated soil and disposal of surplus excavated soil as directed, including dewatering etc during excavation within a lead of 500m incudling backfilling in excavated area. All kinds of Soil |
| 10 | Dismantling of existing borewell MS pipe 200mm dia and diamntled pipe assembling, lowering and fixing in vertical position in bore well, and socketed/plain ended casing pipes of required dia,including painted with outside surface with two coats of anticorrosive paint of approved brand including hire & labour charges, fittings & accessories, all complete as per direction of engineer-in-charge. If any material required for the same contractor will provide free of cost. No extra will be paid beyond quoted amount in this item. Also Dismantled borewell will be filled with debris, sand,soil etc. within this quoted rates only |
| 11 | Charges for Fixing of existing motor along with existing pipeline of old borewell , Cable, etc. inculding connection of borewell with water tank main line incudling Gatevalve, telemetry water meter etc.complete work in all aspects for the running of smooth borewell as per direction of engineer-in-charge. If any material required for the same except motor contractor will provide free of cost. No extra will be paid beyond quoted amount in this item |
