}

Tender For Repair Of Jethia Namopara 106 No With In Bharkata Gp Under Md Bazar Block, Birbhum, Birbhum-West Bengal

Tender Notice

51479166
Corrigendum : Tender For Repair Of Jethia Namopara 106 No With In Bharkata Gp Under Md Bazar Block, Birbhum
Tender
Indian
West Bengal
Birbhum
20-10-2025

Tender Details

Repair Of Jethia Namopara 106 No With In Bharkata Gp Under Md Bazar Block, Birbhum-Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.. i) In 1st floor Total- Page-26,B59,300 Item no-10--PWD-VOL-I-2017 Ordinery cement conc. (1:1.5:3) with graded stone chips 20mm. Down excl. shuttering & reinforcement if any i) In gr floor Total- Page-16 Item no-16--PWD-VOL-I-2017 B/W with first class brick in cement mortar (4:1) in superstructure upto 4th floor. a) In Foundation & Plinth Total-. c) In superstructure (Gr floor) Total-. Page-189 Item no-1--PWD-VOL-I-2017 Plaster with sand, cement mortar in/c rounding off or chamfering corners as directed & racking out joints or roughning of conc. Surface in/c thorating, nosing & drip cours where necessery A. With 4:1 cement mortar i) In ground floor in & out side (20 mm thk.) Total- Page-192 Item no-15--PWD-VOL-I-2017 Neat cement punning about 1.5mm thk. In wall dado, window, sills floor, drain etc. Total. Page-44 Item no-40--PWD-VOL-I-2017 Reinforcemnt for R.C.C. work in the all shorts of structure in/c distribution bars, stirreps, binders etc. in/c supply of rods innitionl straightenig & removal loose rust, cutting to requist length, hooking bending to correct shape, placing in porper position and binding with 16 gauge black anneled wire at every inter section completed as per directionTor steel II. Other than SAIL/ TATA/RINL -- SHYAM/SRMB/JSW/JSPL LEAD 95 KM i) In ground floor(1% of RCC)- Page-42&43 Item no-36--PWD-VOL-I-2017 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (B) 25 mm to 30 mm shuttering without staging in foundation i) In gr floor Total- Page-48 Item no-6--PWD-VOL-I-2017 Artificial stone in floor , dado, stain case etc. with cement conc. (4:2:1) with stone chips lain in panels as directed with topping made with ordinery cement & marvel dust in porportion (2:1) in/c smmothing, finishing & rounding off corners & in/c. application of cement slurry before flooring works using cement @ 1.75kg/sqm. all complete in/c. all material and labour ----35 mm thk. i) In 1st floor Total- Page-198 Item no-1--PWD-VOL-I-2017 Page 1 of 3 i) In Gr floor Total- Page-194 Item no-1--PWD-VOL-I-2017 White washing including cleaning and smoothening surface thoroughly.(In All Floor) b) Two coats (to be done on specific instruction). i) In Gr floor Total- Page-104 Item no-13 M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed. Grill weighing above 16 Kg./sq.mtr and above i) In gr floor Total- Page-105 Item no-15--PWD-VOL-I-2017 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. Total- Fitting Fixing of Door & Window L.S Total- Page-200 Item no-1--PWD-VOL-I-2017 Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. i) In Gr floor Total- Page-200 Item no-2--PWD-VOL-I-2017 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface --With super gloss (hi gloss)---Two coats (with any shade except white) i) In Gr floor Total- Page-16 Item no-16--PWD-VOL-I-2017 125mm thick brick work in cement mortar (1:4) i) In gr floor Total- Page-100 Item no-2--PWD-VOL-I-2017 M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof i) For trusses spanning up to 12.00 m Page-80 Item no-07--PWD-VOL-I-2017 Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work) (i) In Roof:- c) With 0.60 mm thick sheet Total- Page-1 Item no-2--PWD-VOL-I-2017 Earth in excavation of foundation trenches or drains in all shorts of soil (including mixed soil but excl. laterite or sand stone) in/c removing spreeding or stacking the soil within a lead of 75m. as directed.The item in/c necessary trimming the sides of trenches. Leveling, dressing, and ramming the bottom. Boiling out water as read comp. depth of excavation not exceding 1500mm. Total- Page-1 Item no-3--PWD-VOL-I-2017 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation Total- Page-2 Item no-4/b--PWD-VOL-I-2017 Sand filling in foundation & plinth in layers rut exceding 15cm as directed and consolidating save by through saturation water ramming comp. in/c the cost of supply of sand. Total- Page-14 Item no-1--PWD-VOL-I-2017 Single brick flat soling of picked Jhama bricks in/c ramming and dressing bed to proper lavel & filling joints with powder earth or local sand Total- Display Board With Three Stage Photo Hard Copy

Key Value

Document Fees
INR 450 /-
Tender Value
INR 1.49 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail