Replacement Of Old Cwrm Along With Other Ancillary Work At Bhawanipatna Municipality-Supplying all materials , Labour Tools & plants for dismantling of Bituminous courses flexible pavemants and disposal od dismantled materials up to a lead of 1000 mtr ,stacking serviceable & unserviceable material separately all complete as per specification &the direction of engineer-in-charge. 2 Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately 3 Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge all complete. 4 Supplying all labour andT & P etc. and laying in trenches, centrifugally Ductile(spun) Iron pressure pipes conforming to I.S : 1536 of the following nominal diameter and Class as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 5 200mm dia D.I. Class-K-7 pipe(j-13-zone-16,j-14 to zone-06 and J44 to J-60) 6 250mm dia D.I. Class-K-9 pipe (J-13 to J-14) 7 300mm dia D.I. Class-K-9 pipe (J-12A to J-14) 8 350mm dia. D.I. Class-K-9 pipe (Naktiguda chawk to J-12A) 9 400mm dia D.I. Class-K-9 pipe (J-11 to Naktiguda chawk) 10 Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 11 200mm dia D.I. Class-K-7 pipe 12 250mm dia D.I. Class-K-9 pipe 13 300mm dia D.I. Class-K-9 pipe 14 350mm dia. D.I. Class-K-9 pipe 15 400mm dia D.I. Class-K-9 pipe 16 Supplying all materials, labour and T & P etc. and fixing Cast Iron Sluice Valve with double flanged ends & cost of Nut, Bolt, Rubber insertion etc. for water works purposes for the following rating and nominal diameter as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 17 100mm diameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 18 150mm diameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 19 200mm diameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 20 250mm diameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 21 300mm diameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 22 350mm diameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 23 400mmdiameter CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000) 24 Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. (Including Tyton Ring). 25 200mm dia. Rubber Tyton joint 26 250mm dia. Rubber Tyton joint 27 300mm dia. Rubber Tyton joint 28 350mm dia. Rubber Tyton joint 29 400mm dia. Rubber Tyton joint 30 Supplying all materials, labour andT & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:3:6) of 100mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 100mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. 31 Sluice valve Chamber (1.05mx1.05mx1.20m) 32 Sluice valve Chamber (.75mx.75mx.9m) 33 Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete. 34 MS Pipe cost 35 219.1 mm (6.30 mm) 36 273 mm (6.30 mm) 37 323.9 mm (7.10 mm) 38 355.6 mm (8.0 mm) 39 406.4 mm (8.80 mm) 40 MS pipe cutting / 41 MS pipe welding at site 42 Providing Flanged joints conforming to IS:3114-1994toFlanged Cast Ironpipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nutsand rubber insertions as per specification and direction of the Engineer-in-charge, all complete. 43 200mm dia. 44 250mm dia. 45 300mm dia. 46 350mm dia. 47 400mm dia. 48 Cost of fittings 49 100mm dia. Sluice Valve, Rating P.N - 1-60 (I.S :14846 / 2000)-Make- Kirloskar/IVC) 50 150mm dia. Sluice Valve, Rating P.N - 1-60 (I.S :14846 / 2000)-Make- Kirloskar/IVC) 51 200mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC) 52 250mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC) 53 300mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC) 54 350mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC) 55 400mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC) 56 Cost of MS Flanges 57 100mm dia. MS Flange (10mm thick) 58 150mm dia. MS Flange (10mm thick) 59 200mm dia. MS Flange (12mm thick) 60 250mm dia.MS Flange(12mm thick) 61 300mm dia. MS Flange(16mm thick) 62 350mm dia. MS Flange(16mm thick) 63 400mm dia. MS Flange(16mm thick) 64 Supplying all materials, labour and T&P etc. and filling in foundation and plinth with sand, well watered and rammed including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mendinggood damages ofroad). 65 Supplying all materials, labour and T & P etc. and providing cement concrete (1:3:6) using 40mm size hard granite metal,as per specification and direction of the EIC, including transportation of all materials to site, all complete. (Mendinggood damages ofroad). 66 Supplying all materials, labour and T&P etc. and providing M-15 Cement Concrete ( 1:2:4 ) including hoisting and laying using 12mm size hard granite crusher broken chips, including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mendinggood damages ofroad). 67 Supplying all labour and T&P etc. and filling in pipe line trenches with the excavated earth, well watered & rammed as per specification and as directed by the Engineer-in-charge, all complete. 68 Transportation by truck/Tractor up to 5 Km lead (DEBRIS & SURPLUS EARTH), including loading unloading and spreading etc. all complete. 69 Fixing DI Tamper proof Kinetic Air Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (M.Spipes with metal straps) as per specificationcomplete 70 N.H. Crossing 71 Supplying all materials, labour and T & Petc. and pushing of MS Casing pipe of Specified thickness adopting trenchless tecknology tunnelling work through specialized hydraulic pipe jacking tecknique by erecting the equipment to true to the alignment and gradient including pushing/jacking into the encasing pipe at the specified depth from the rail level under traffic condition by using crane for handling of pipe, jacks and jacking equipment, generator, welding machine and any other machinanery, tools, and tackles required for pushing the pipe as per railway standard including carrying out survey work at the job site for determining underground trenches for water & sanitary lines and resistivity test for finding the soil strata using necessary equipment for completion of work, mobilizing of machinaries and specialized crew at the job site complete in all respect, including proper protection at three sides with shoring sheets and ISMB, providing MS cutting edges for front shield and constructing thrust bed at designated level, necessary de-watering and providing concrete foundation at the base of the driven pit, PVC/Rubber sadle as per the requirement of Railway Authority, specification and direction of Engineer-in-Charge and transportation of all materials to site, all complete. 72 Supplying all materials, labour &T&P etc. and providing high density polyethylene spacer between the casing and carrier pipe etc. including transportation all materials to site and as directed by the Engineer-in-chargeall complete. 73 Supplying all materials & stacking the MS pipesofall Classes conforming to IS:3589-2001 & IS:3601-2006 of the following outside diameter as per specification including cost of pipe, coveyance, loading, unloading at site etc.and as directed by the Engineer-in-chargeall complete. 74 Casing MS pipe 75 610mm O.D. MS ERW pipe (6.3mm thick) 76 Carrier MS pipe 77 400mm O.D. MS ERW pipe (5.6mm thick) 78 250mm O.D. MS ERW pipe (6.3mm thick) 79 Supplying all materials labour and T & P and Flame cutting and facing of MS plateup to 8mm thick as per specification complete. 80 Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete. 81 Supplying all materials, labour and T & P for Fixing Ferrule (Repair of House Connection) conforming to IS:2692-1978 of the 15mm dia.bore including drilling the water main (Cast Iron/DI pipes or pipes with the metal straps) as per specification, all complete.
