Tender For B/R Petty Repair In Domestic & Tech Area At Af Stn Bikaner; 1 Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal,complete all as specified and directed. 2 Supply and fixing, coluored Virified Ceramic tiles, 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including providing screed bed 15mm thick in CM(1:6), Complete all as specified and directed. 3 M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM(1:6), Complete all as specified and directed. 4 M & L for joint free glazed coloured ceramic coloured tiles of 350mm x 250mm x 7mm /450X 350X 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed. 5 Dismantling stone and tiles of any description or thickness in floor aprons etc, Complete all as specified and directed. 6 M & L as in repair machine cut Granite slab 20 mm thick for steps, pillars,window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshingetc complete all as spd.Note:-(i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular.(ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish, Complete all as specified and directed. 7 Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed. 8 M&L rendering 15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 9 Material and labour for rendering 15 mm in cement mortar 1:6 on fair faces of brickor concrete surfaces and finishing the surfaceseven and smooth without using extra cement complete all as specified and directed. 10 M&L rendering 5 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. 11 M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over and including a coat of alkali resistant primer complete all as specified and directed. 12 M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applyingtwo coats of white wash complete all as specified and directed. 13 M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage pattern of approved tint / shade(s) over and including a coat ofwater based primer complete all as specified and directed. 14 Material and Labour for preparation of plastered or unplastered old surfaces of walls usingnecessaryfillingcompound of puttyto obtainsmoothregular/evenfinishusingsandpaperand applying two coats of oil bound distemper on walls all as specified and as directed by Engr-in-Charge. 15 Materail and Labour for preparation of plastered or unplastered old surfaces of ceilingusingnecessaryfillingcompound ofputtyto obtainsmoothregular/evenfinishusingsandpaper and applying a coat of white wash on ceiling all as specified and as directed by Engr-in-Charge. 16 M&Lfor Complete removalofexisting/oldtreatmentbymannualy and mechnically andpreparation ofsurfacesusingnecessaryfillingcompound ofputtyto obtainsmoothregular/evenfinishusingsandpaperandapplyingtwocoatofexterior emulsion paint(tint as approved by GE ) on wall height upto 7.0 mt.and any position completeall as specified and directedbyEngineer - in- charge. 17 Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed. 18 M&Lforbrickwork with burnt clay sub classBbrick straightor curvedonplan exc6 m mean radiusand builtin cement mortar 1 : 6 complete all as specified & directed. 19 Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) incl making good the disturbed surfaces complete all as specified & directed. 20 Supplying & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube Square tube, suppling & fixing in opening complete all as specified & directed 21 M&L factory made solid panel pvc door shutter 30mm thickconsisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MSframe welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as spd. 22 Supply and fixing Mild steel butt hinges medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed. 23 Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed. 24 Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified & directed. 25 Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed. 26 S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or with clip in squares n.ex.c. 0.50sqm in each pane complete 27 All as per item no 26 above but 4mm thick ordinary sheet glass exc 0.5sqm in each pane, Complete all as specified and directed. 28 Dismantling wall and ceiling boards ( fibre , pulp,insulation etc.) or insulation boards / slabs / blankets , any thickness , including fillets, suspension systems, complete all as specified and as directed. 29 M&L for gypsum board false ceiling type B complete with GI frame work/ suspension system type XL 15mm and 600mmx600mmx15mm thick fine fissur D RH 99 micro look white colourcomplete including necessary suspenders rawl plug/lewis bolt plugging to walls complete all as specified and as directed by the Engineer-in-Charge. 30 Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) incl making good the disturbed surfaces complete all as specified & directed. 31 Material & Labour forfactory made 1.25 mm thick pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc including filling hollow with PCC 1:2:4 type B0( using 12.5 mm graded crushed stone aggregate), complete all as specified and as directed. 32 Material & Labour forfactory made 1.25 mm thick pressed steel frames for doors of size 105 x 60 mm for doors with one or more rebated incl necessary fixing lugs, hinges, lock, strike plates welded with framefor making arrangement for fixing of door spring etc including filling with PCC 1:2:4 type B0. complete all as specified. 33 Supply and fixing factory made plain, framed, Plain framed, panelled shutter (two panel) 35 mm thick of 2nd class hardwood rail and stylewith lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed. 34 Supply and fixing glazed and gauged skeleton shutters35mm thick, 2nd class hard wood Hollockopen rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cutand mitred beads for securing glass etcincl priming coat. The size of member of shutters as spd in SSR Part-1 Section 8 clause 8.24 (a) incl kiln seasoned and chemically pressure treated, complete all as specified & directed. 35 Supply and fixing Galvanised mild steel wire cloth, in new doors and windows 0.56mmnominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed. 36 Supply and fixing Galvanised mild steel wire cloth,as in repairs, 0.56mmnominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed. 37 Welding works in repairs of steel surfaces n. exc 2.5cm in length and not exc. 6mm thick complete all as specified. 38 Materialand Labour for preparation of newsurfaces of wood & wood based surfaceof any description not otherwise described, over 10 cm width & girth and applyingtwo coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed by Engineer-in-Charge. 39 Materialand Labourfor preparation of newsteel & steel based surfaceof any description not otherwise described, over 10 cm width & girth and applying twocoat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. 40 Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. 41 Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm fixed as in repairs complete all as specified & directed. 42 Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed. 43 Supply and fixing aluminium fabricated type extruded handles of size 150mm fixed as in repairs complete all as specified & directed. 44 Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed. 45 Supply and fixing in repairs 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed. 46 Dismantling boarding any description fixed in any position with screws, Complete all as specified and directed. 47 Supply and fixing18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work/ steel chowkhats as in kitchen cabinet / cubboard shutter complete all as spd and directed by Engr-in-Charge 48 S/F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished 49 S/F 40mm width of flaps continuous (piano) hinges mild steel bright finish or electrogalvanised. 50 Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed. 51 Dismantling water tanks and removing from site of 1000 litres capacity complete all as specified and directed. 52 S&F 500 litres capacity Rotational moulded polyethylenewith triple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed 53 S&F 1000 litres capacity Rotational moulded polyethylenewith triple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed 54 Taking up or down 15 mm dia steel tubing and connectionand removal from site complete all as specified and directed. 55 Taking up or down 20 mm dia steel tubing and connectionand removal from site complete all as specified and directed. 56 Supply and fixing 15mm bore tubes medium grade galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified & directed. 57 Supply and fixing 20mm bore tubes medium grade galvanized with and incl all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as spd & directed. 58 Supply and fixing in repairs fancy type angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. 59 Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls all asdirected. 60 Supply& fixing in repairs PVC connections 15mm size with PTMT nuts of length 450 mmcomplete all as specified anddirected. 61 Supply and fixingin repairs long body Bib taps,chromium plated cast copper alloy with quarter turn butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed. 62 Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed. 63 Supply& fixingas in repairs wash hand basin, vitreous china, white, decorative type, flat or angleback, size 580mm x 450mm inclusive ofwaste pipe and brass coupling and pillar tap and including cutting for and pinning in ends of brackets or erecting stand and inclusive of cost of brackets complete all as specified and directed. 64 S&F as in repair Pillar taps long body fancy type with capasten head chromium plated screwed down high pressure with without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 65 Supply and fixing as in repair vitreous china squatting pan Orissa pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. 66 S&Fas in repairs Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. 67 S&F in repair soap dish Chromium plated SS, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. 68 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed 69 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed 70 S&F in repairs stainless steel plate rack of size 78cmX91cmX25cm made out of 0.80 mm thick of stainless steel sheet , fixed in wall with rawl plugs and screws complete all as specified and directed. 71 S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as spd and directed 72 Supply& fixingas in repair PVC bath cabinet, size 622mm x 422mm, comprising of lookingglass, space for bath soaps, shampoo, tooth brush and paste, hand towel rail, complete all as specified and directed. 73 Supply and fixing as in repairs faucet health (hand jet) 15mm bore cast copper alloy, chromium plated with flexible chromium plated connection pipe, with fittings, complete all as specified and directed. 74 S&F as in repair vitreous china padastal pattern, WC incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete, in repair complete all as specified and directed. 75 Takingdownrain water pipes PVC/AC (anysizeor pattern)includingall fitting heads, shoes, bendsswan -necks etc comlete all as sd and directed by EngrinCharge 76 Supply and Fixing , 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified. 77 S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified. 78 S&F 75mm dia PVC (SWR) floor trap plain with CP grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified and directed. 79 S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified. 80 All as per item No. 79 above but for 110 mm dia. 81 S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. 82 All as per Item no 81 above but for 110 mm dia 83 S&F as inrepair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge 84 S&F 15 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as spd by Engr-in -Charge 85 All as per above item84 above but 20 mm bore. 86 Demolition of Stone sett paving of any description or thickness, Complete all as specified and directed. 87 Supply and fixing factory made chequred cement concretecoloured tiles 200mm x 200mm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20 mm thick screed bed in CM 1:4, complete all as specified & directed. 88 S&F Aluminum (extruded section body) in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed 89 S&F RAB door seal bottom brush duststopper with aluminium plate nylone brush of selected colour for fit each complete all as specified and directed. Note : The sample of item shall be approved by GE before placing at site 90 S&F in repair Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories Set , incl Cisternfittings, size 385x720x715mm complete all as specified directed by Engr-in-Charge. 91 Supply& fixingas in repairs wash hand basin with pedestal, vitreous china, white, decorative type, flat or angleback, size 580mm x 450mm inclusive ofwaste pipe and brass coupling and including cutting for and pinning in ends of brackets or erecting stand and inclusive of cost of brackets complete all as specified and directed. 92 S&Fin repair HD perimeter circle lighted mirror of size 1016x1016x43mm including fixing complete all as specified and directed by Engr-in-charge. 93 S&F Bib tapstandard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms). complete all as specified and directed by Engr-in-charge 94 S&F as in repairs of 300mm mild steel ordinary rat tail rod pattern door spring incl roller and roller plate complete all as spd. 95 Material and labour for repairing of soffits of slabs/Chajja, Facia and similar works by dismantling of loose/ disintegrated portion of RCC upto 7.5 mtr heightand in any sitution, including provn of support,formwork and welding of reinforcement and fixing in position and with provision of weld mesh, applying dubbing 1st coat of 20 to 25mm thick in CM 1:3 finished rough and finishing coat of 10mm thick in CM (1:3) finished even and smooth without using extra cementover and including cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of weather proof exterior emulsion paint over a coat of arylic resistant primer to match with existing surfaces complete all as specified and directed.(weld mesh measured and paid sepatrtely)Note:- (i) Unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height. (ii) For payment purpose, the area of finished plaster in 2nd coat shall be considered. 96 S & F as in repairs Two way angle cock Quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 97 Supply and fixing as in repair central hole Basin Mixer long swang nack, without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 98 Supply and fixing as in repair central hole Sink Mixer long body swang nech for mixing Hot & Cold water, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 99 S&F as in repair Brass CP wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 100 S&F as in repair Brass CP wall mixer 2-in-1 system with provision for over head shower complete with 115mm long bend pipe on upper side, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 101 Supply& fixing as in repair toiletpaper holder of brass chromium plated, complete all as specified and directed. 102 S&F in repair Stainless steel (Grade 305) curtain rods 25mm dia 0.80mm wall thickness mild steel chromium plated incl supporting brackets complete all as specified and directed. 103 S&F in repair Stainless steel (Grade 305) Ornamental type brackets (Open Ends) suitable for curtain rods of 25mm dia all as specified and directed. 104 S&F in repair Stainless steel (Grade 305) brackets (Dead Ends) suitable for curtain rods of 25mm dia all as specified and directed.
