Tender For Renovation Work In The Vc Camp Office. - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm (DSr-15.23.2 /2023)(113.35*0.762=86.37) 2 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete.( DSR-13.91/2023) (25.15*0.735*111/107*100=19.16) 3 Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar (DSR-15.7.4/2023)(2060.20*0.762=1569.87) 4 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres ( DSR-15.12) ( 502.75*0.762) 5 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area beyond 3 sq. metres (DSR-15.13.2) (188.90*0.762) 6 Providing & Laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto Plinth level: 1:4:8 (1 cement : 8 coarse sand(zone-III) Derivedfrom natural sources : 8 graded stone agrregate-40 mm nominal size derived from natural sources) ( DSR-4.1.8A/2023) 7 Brick work with common burnt clay F.P.S( Non-Modular) Bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 ( 1 cement:4 coarse sand) (DSR-6.1/2023) 8 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) ( DSR-13.1.1/2023) 9 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) (DSR-11.26/2023)( 10 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels(DSR-8.2.2.1/2023) 11 Providing & Laying of Vitrified tiles in floor indifferent sizes( thickness to be specified by the manufactured) with with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufactured in all colours and shade laid to 20mm Thick cement slurry @ 3.3 Kg/Sqm Including Grouting The joints with white cement and matching pigments etc. The tiles must to cut with the zero chipping diamond cutter only. Laying of tiles willbe done with the notch trowel, plier, wedge, clips of required Thickness, Leveling System and rubber mallet for placing the tiles gently and easily.Size tiles : 600 x 600 mm ( DSR11.41A/2023) 12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. ( DSR 13.80/2023)156.05*0.735*111/107*100=118.91 13 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR-10.1/2023) 14 Providing & Fixing of Chemical Fasner etc all complete of the work. (M.R) 15 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles. 16 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR-21.18/2023) 17 Electrical Item: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as requiredSI NO.1.10.3 Group C DSR 2022 Electrcal (1467 x 0.789 x 111/110 = 1167.99) 18 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required...SI NO.1.12 Group C DSR 2022 Electrcal(334 x 0.789 x 111/110 = 265.92) 19 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switchSI NO.1.24.1DSR 2022 Electrcal (103 x 0.789 x 111/110 = 82.00) 20 15/16 A switchSI NO.1.24.3DSR 2022 Electrcal(156 x 0.789 x 111/110 = 124.20) 21 3 pin 5/6 A socket outlet SI NO.1.24.4DSR 2022 Electrcal(122 x 0.789 x 111/110 = 97.13) 22 6 pin 15/16 A socket outlet SI NO.1.24.5 DSR 2022 Electrcal(197 x 0.789 x 111/110 = 156.85) 23 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole . SI NO.2.10.1DSR 2022 Electrcal(256 x 0.789 x 111/110 = 203.82) 24 Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. SI No. 1402 CAT- AAA UPPWD SOR 2018 E 25 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSI NO.19.1DSR 2022 Electrcal(2730 x 0.789 x 111/110 = 2173.55) 26 Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect. CAT- AAA SI No. 1417A CAT- AAA UPPWD SOR 2018 E 27 Labour (SI No. 12/SOR + CP) 28 Tractor Trolley (SI No. 19/SOR) with CP 29 Providingand applying fibre reinforced elastomeric liquid water proofingmembrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer in-Charge. (DSr-22.22A/2023) 30 Finishing with Deluxe Multi surface paint system for interiors and exteriorsusing Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm ( DSR 13.48.1/2023)( Outer Wall ) (193.7*0.735*111/107*100=147.60 31 French Spirit Polishing: Two or more Coats on new works including a Coat of wood filler (DSR-13.68.1/2023)(446.25*0.735*111/107*100=340.04) 32 Supply and fixing of charcoalPannel etc. all complete of the work.( m.r Quotation Rate) 33 Providng & Fixing stainless steel ( Grade-304) Railing made of hollow tubes, channels, plates etc. including welding, griding, buffing, polishing and making curvature ( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the size of waist slab with suitable arrangment as per approval of engineer-in-charge ,( for payment purpose only weight of stainless members shall be considered exculding fixing accessories such as nuts, bolts fasterners etc) ( DSR-10.28/2023)( 772.40*0.735*111/107*100= 588.57) 34 (1) Making of Old 10cm Width window into 60cm Width and 38cm height. 2 side facing(2) Only Fixing of Toughened glass outside of window face.(3) Applying of teak plywood all four sides of window With 19MM century Ply Board & Teak sunmica 1MM Thickness As per direction byengineer-in-charge. ( M.R ) 35 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheathusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)(DSR-26.88/2023) 36 Sofa (M.R) 37 Curtain (M.R) 38 Aluminium Plated Mash (M.R) 39 Aluminium Sliding Folding(M.R) 40 Almira(M.R) 41 Blind (M.R) 42 Wooden Parition (M.R)
