Tender For Special Repair To Omqs At Afs Yelahanka; 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 2 Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. 3 M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.42 Sqm not exceeding 1.00 Sqm for flooring using 3 mm thick spacer with epoxy grouting over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 4 M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.42 Sqm not exceeding 1.00 sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting including taking down old plaster surfaces finished complete all as specified and directed. 5 M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc, laid in with 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified directed. 6 M&L for Glazed coloured ceramictiles of size 450x300X7 mm thick set and jointed in neat cement slurry including matching PVC corner beading and pointed in white or colour cement to matchas in skirting/dado over 10 mm thick rendering in CM 1:4 finished fair to receive tiles complete all as specified and directed. 7 M&Lfor Non skid coloured ceramic tiles 7 to 8 mm thickmatt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed. 8 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed. 9 M&L for 20mm thickGranite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cooking platforms and including 20mm thick cement mortar (1:4) including pointing in white cement (tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone using marble dust with admixture of pigment to match including rounding and polishing to edges of granite slab complete all as specified and directed. 10 Demolition of plain cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. 11 M&L for 75 mm thick plain cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) for plinth protection complete all as specified and directed. 12 M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for thickness of slab 100mm below complete all as specified and directed. 13 Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. 14 Demolition of brick work or stone masonry built in CM including all quions complete all as specified and directed. 15 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided for complete all as specified and directed. 16 M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. 17 M&L for brick work with sub class B bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed. 18 M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. 19 M&L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed. 20 M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble complete all as specified and directed. 21 M& L for new wall surface applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of interior acrylic emulsion paint over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per following steps complete all as spd and directed:-(a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 litres per minutes with a maximum pressure 3300 PSI.(c ) Allow 6-8 hrs time to dry the putty surface. 22 M&L for Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having Dia of 7/9 to make the surface free from dust, loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of Oil bound emulsion distemper over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 metre the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. by skilled labour as per following steps complete all as spd and directed:-(a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 litres per minutes with a maximum pressure 3300 PSI.(c) Allow 6-8 hrs time to dry the putty surface. 23 M&L for new wall surface applying two coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 metre the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as spd and directed. 24 M&L for Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having Dia of 7/9 to make the surface free from dust, loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of interior acrylic emulsion paint over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 metre the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per following steps complete all as spd and directed:-(a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 litres per minutes with a maximum pressure 3300 PSI.(c ) Allow 6-8 hrs time to dry the putty surface. 25 All as per item no 24 but on ceiling surfaces complete all as specified and directed. 26 M&L preparation of old decorated wall surface and applying two coat of White wash complete all as specified and directed. 27 M&L preparation of old decorated ceiling surface and applying one coat ofwhite wash complete all as specified and directed. 28 M&L for preparation of old painted steel surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel Painting complete all as specified and directed. 29 M&L for Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having Dia of 7/9 to make the surface free from dust, loose paint etc by skilled labour and applyingtwo coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 metre the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as spd and directed. 30 M&L for preparation of old decorated surface by complete removal of existing treatment and applying one coat of texture paint of approved shade overone coat of primer over one coat of wall Birla putty complete all as specified and directed 31 M&L for writing letters or figures (Block, Roman, italic or Indian) n exc 30 cm height etc. complete all as specified and directed. 32 Taking up or down 15mm steel tubing and connections all as specified and directed. 33 All as per Item No.32 but 20mm size 34 All as per Item No.32 but 25mm size 35 All as per Item No.32 but 40mm size 36 S&F 20 mm Dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. 37 S&F CPVC pipes25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified and directed. 38 S&F in repair of steel water tubing of 40mm in trenches medium grade ISI marked including all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed. 39 S&F in repair of GI tubing of 20mm size in walls/ceilings or laid in floors of medium grade ISI marked incl all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed. 40 All as per Item No.39 but 25mm size 41 All as per Item No.39 but 40mm size 42 S&F Rotational moulded polyethylene water storage tanks of 1000L capacity (cylindrical vertical with closed top) hoisted and fixed in position along with all necessary fittings etc including dismantling/taking down old water tanks complete all as specified and directed. 43 S&F in repair Ball valves of 20mm Dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed along with all necessary fittings like nipple, socket, etc complete all as specified and directed. 44 S&F in repair 20mm Dia, Gun-metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe all as specified and directed. 45 S&F in repair 25mm Dia, Gun-metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe all as specified and directed. 46 S&F in repairs Vitreous China wash down water closet pan One Piece EWC size 650 x 360 x 745 mm (pedestal single pattern), with smooth action plastic seat cover, valveless symphonic action type flushing cistern with 300 mm Dia trap fixing as per manufacturing instruction complete as specified and directed. (CAT No S1013142 S Trap 300 mm Make of Cera or Equivalent make in PS) 47 S&F in repairs Ceramic plain full pedestal wall hung type wash basin white/colour size 630 x 450 x290 mm height 820 cm and including CP waste coupling, branches complete all as specified and directed. (CAT No -S2090101 Make of CERA or Equivalent make in PS) 48 S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 49 S&F in repair Brass CPcentre hole Mixerfor hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed.Note:(FLR-5169NB of make JAQUAR or Equivalent make in PS). 50 S&F in repair CP Brass 3-in-1 wall Mixer with over head and hand shower for hot and cold water screwed down for iron pipe and fixed for 15 mm Dia complete all as specified. Make :(FLR-CHR-5281N of make JAQUAR or Equivalent make in PS). 51 S&F in repairs 15 mm dia two waybib taps (fancy type), cast copper alloy with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Note:(CON-CHR-083 FTK of make JAQUAR or Equivalent make in PS). 52 S&F in repairs 15mm dia angle valves, cast copper alloy, CP,screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unionscomplete all as specified and directed.Note:(ARI-CHR-39053 of make JAQUAR or Equivalentin cera/ESS ESS). 53 S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm including sink coupling complete all as specified and directed. 54 S&F in repair sink cock fancy type and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Note:(FLR-CHR-5347N of make JAQUAR or Equivalent make in PS). 55 S&F in repair Towel Rack with lower hanger(stainless steel), fixed with screws, complete all as specified and directed.Note: MakeJaguar (Code No AHS-1581H) or Equivalent make in PS. 56 S&F PVC Cabinet mirror of size 600 x 450 x125 mm complete all as specified and directed. 57 S&F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directedNote: (OHS-CHR-1719 of make JAQUAR or Equivalent make in PS). 58 S&F in repairs CP Shower arm 15 mm size,195 mm long with bend of 45 degree with flange as specified and as directed.Note: (SHA-CHR- 483 FTK of make JAQUAR or Equivalent make in PS). 59 S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. 60 S&F of 32/40mm waste pipe for wash hand basin and sink complete all as specified and as directed. 61 S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. Note : (AKP-CHR- 35711PS of make JAQUAR or Equivalent make in PS). 62 S&F in repair corner glassshelf150mm X 150mm with Assy ofCP andfixed with Chromium plated brass screws and wooden/plastic cleats, complete allas specified and as directed. 63 S&Fin repair CP Towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats,complete all as specified and as directed.Note: (ACN-CHR- 1121BN of make JAQUAR or Equivalent make in PS). 64 S&F in repair Stainless steel Soap dish fix to wall complete all as specified and directed. Note: (ACN-CHR- 1131N of make JAQUAR or Equivalent make in PS). 65 S&F in repair Corner glass shelf large, 300x300mm with assembly of CP and fixed with Chromium plated brass screws and wooden/plastic cleats,complete all as specified and as directed. 66 S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin complete all as specified and as directed. 67 S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.Note:(ALD-CHR- 587 of make JAQUAR or Equivalent make in PS). 68 S&F in repair 1mm thick, stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed. 69 S&F in repair Stainless steel Toilet paper holder complete all as specified and directed.Note:Jaguar Model AKP 35753P or Equivalent make in PS) 70 S&F in repair Brass chromium plated bottle traps 32 mm for wash basin and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed. 71 S&Fin repair PVC floor trap 75mm Dia, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed. 72 S&F 110 mm Dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed. 73 S&F PVC (SWR) bends 110 mm Dia in any radius with access door etc complete all as specified and directed. 74 PVC (SWR) pipes 75 mmsingle socketed with inanylength with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed. 75 S&F PVC (SWR) bends 75 mm Dia in any radius with access door etc. complete all as specified and directed. 76 S&F PVC (SWR)75mm Dia junction (single T) equal or unequal with access door etc. complete all as specified and directed. 77 S&F CP grating size 100mm fixed with white cement all as specified and directed. 78 Taking down door chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. 79 Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm complete all as specified and directed. 80 M&L for taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm, complete all as specified and directed. 81 M&L for taking down shutters of any description exc 2sqm each and refixing in the same opening complete all as specified and directed. 82 M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required Dia complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 83 All as per item No 82 above but double extruded WPC ofFrame size 50 x 125 mm complete all as specified and directed. 84 Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) using 12.5 mm graded aggregate, depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. 85 M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixingedges will be painted to match with prelam sheet complete all as specified and directed. 86 M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed. 87 S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, completeall as specified and directed. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 88 S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing complete all as specified and directed. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extrudedprofiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed. 89 S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. 90 S&F Pleated/Collapsible sliding Mosquito proof polypropylene mesh door with Aluminium frame including locking arrangements with all necessary accessories complete all as specified and directed 91 S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed. 92 S&Ffor brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. 93 S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed. 94 S&F for extruded brass handle 150mm fabricated type polished complete all as specified and directed. 95 S&F for Mortice latch 65 mm length with two levers (vertical type), brass body and fixed complete all as specified and directed. 96 S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. 97 S&F Brass 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. 98 M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 99 S&F black tinted sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator complete all as specified and directed. 100 All as per item No. 99 above but figured glass pin head type complete all as specified and directed. 101 S&F black tinted sheet glass ordinary quality 4mm thick as in doors, windows, showcase in aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. 102 S&F stainless steel wire cloth 0.36 mm nominal Dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 103 S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 104 M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primerto steel surface complete all as specified and directed. 105 S&F for aluminium powder coated drapery rod 32mm Dia fixed with suitable bracket complete all as specified and directed.(Note: Bracket will be measured and paid separately) 106 S&F aluminium powder coatedfancy type suitable brackets fixed atboth ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm Dia and 20mm thick fixed to stone wall/Brick wall using screws including necessary drilling & finished with polishing.Each opening shall have two fillets at both ends complete all as specified and directed. 107 M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and prelaminated side with different design and other side plain white of density not less than 600kg/cum,should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity and complete all as specified and directed. 108 S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cmcomplete all as specified and directed. 109 S&F Stainless steel 304 grade kitchen basket48 cm x 50 cm x 15 cm complete all as specified and directed. 110 S&F Stainless steel 304 grade kitchen basket48 cm x 50 cm x 20cm complete all as specified and directed. 111 S&F for 110 mm long stainless steel 2 hole Self closing hinges complete all as specified and as directed. 112 S&F for stainless steel size 200 mm long D type rounded type drawer wardrobe handle complete all as specified and as directed. 113 S&F for stainless steel size 300 mm long D type Square type wardrobe/door handle complete all as specified and as directed. 114 M&L for stainless steel size 1000/900mm x 40mm x 40 mm oval type hanging rod with end brackets for cupboard (Wt. not less than 370 g) complete all as specified and as directed. 115 S&F for 600mm long telescopic channels,rollers for smooth sliding of drawers complete all as specified and directed. 116 S&Fmagnet catch of approved qualities 75mm size complete all as specified and directed. 117 S&F for polished Sadarahalli stone slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staircase including rounding, nosing, polishing and groove cutting to edges of granite slab complete all as specified and as directed. 118 S&F 20 to 22mm thick polished sadarahalli stone tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 including rounding, nosing, polishing and groove cutting to edges of granite slab complete all as specified and directed. 119 S&F stainless steel (Grade 304)frame work for railing of requiredsize inhorizontal/vertical members of stainless steel pipe, including dismantling the existing MShand rail as in staircase and balcony complete all as specified and as directed. 120 M&L for Writing stops, commas, short lines dashes, hyphens, brackets etc. complete all as specified and as directed. 121 M&L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in shelves complete all as specified and as directed. 122 M&L TMT bars 6 to 8mm Dia and over cut to length bent to shape required including cranking spirally for hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and as directed. 123 S&F for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer Dia 22mm and inner Dia 19.80 mm and pully made up of Delrin with rope guide mounted on channel pair of length 24(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50 mm Dia complete all as specified and as directed. 124 Taking down copper/aluminium point wiring (light,fan, socket or power) including fixtures and fittings suchasswitches,ceiling roses, pendants, regulators, sockets, light fittings and removing materials to store for keeping in safe custody or for taking into credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. 125 Taking down the unserviceable MCB DBs & metal clad sockets of any capacity/any type complete all as specified and directed. 126 Taking down the unserviceable MCB of any rating and any size/type complete all as specified and directed. 127 Taking down old unserviceable sub main wiring of any size complete all as specified and directed. 128 M&L forpoint wiring in PVC concealedconduit as required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLS) 1.5 sqmm nominal cross sectional area 1100 volts grade with all fittings such as elbows, bends, junction boxes, saddles including PVC board (ISI Mark) and screws and Rawal plugs including 1.5 sqmmPVCinsulated & unsheathed copper conductorcable as earth wire and connected to light/fan & common earth dollywith necessary copper thimbels all as specified and directed for One light/bell/ fan point controlled by one, one wayswitch. 129 All as per item No 128 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch. 130 All as per item No 128 above butone socket outlet 5 pin 5/6 Amps onsame board with other one, one way switch. 131 All as per item No 128 above but one light point controlled by 2 Two way switch 5/6 Amps onindependent board . 132 All as per item No 128 above but one bell / buzzer point controlled by one push button on the same board with other switches . 133 All as per item No 128 above but for socket out let, 15/16 Amps on independent board with 2.5 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly all as specified and directed. 134 All as per item No 128 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 4 Sqmm for continuity earth wire connected to common earth dolly all as specified and directed. 135 S&F in repairs Modular metal flush/PVCterminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. 136 S&F in repairs Modular metal flush/PVCterminal boxes with lumina plate and frame suitable for 4 module complete all as specified and directed. 137 S&F in repairs Modular metal flush/PVCterminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. 138 S&F in repairs Modular metal flush/PVCterminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed. 139 S&F Switch modular type single pole one module, 6 Amps complete all as specified and directed. 140 S&F Switch modular type single pole one module, 6 Amps, Two way complete all as specified and directed. 141 S&F Switch modular type single pole one module, 16 Amps complete all as specified and directed. 142 S&F Socket outlet modular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as specified and directed. 143 S&F Socket outlet modular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as specified and directed. 144 S&F Modular bell push single pole one module, 6 Amps complete all as specified and directed. 145 Modular blank plate one module complete all as specified and directed. 146 S&F Modular type stepped type electronic fan regulator 2 Module 230 Volts complete all as specified and directed . 147 S&F AC SocketPVC,220 Volts alongwith MCB 20 Amps complete all as specified and directed. 148 S&F in repairs call bell Ding Dong230V,AC,single phase ISI marked complete all as specified and directed. 149 S&F in repairs ceiling rose 2/3 terminals 65x25 mm Dia poly carbonate isolated complete all as specified and directed. 150 S&F in repairs of LED light fittingtwo feet 1x10 watt,slimdesign,230 volts,indoor recess mountingincluding connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector complete all as specified and directed. 151 S&F in repairLED tube light fitting bright20 wattslim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector all as specified and directed. 152 S&F in repair of building security light fitting complete with 35 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out by GI pipe 32 mm Dia (lightgrade) 1.5 metre long and MS clamp and nut bolts washers etc complete and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed. 153 M&L for earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick buried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and including GI earth lead wire4mm Diaby means of bolts ,nuts, check nuts & washers ofgalvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm gradedcrushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GIprotection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc including tanking out old unserviceable earth material complete all as specified and directed. NOTE :- (a) GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.(b)Earthing value should be less than 5 ohms.(c)If desired value of earth resistance not achieved during testing, the earthing work shall be redone by the contractor at free of cost to achieve the desire value of earthing resistance. The rate quoted by the contractor deemed to be inclusive of the provision. 154 S&F in repairs of DB, SPN 4 way double door for MCB, 240 volt with 200 amps rated bus bar complete all as specified and directed. 155 S&F in repairs of DB, TPN 4 way vertical type with single/three phase outgoing with provision for MCCB as incomer 415 volt with 200 amps rated bus bar complete all as specified and directed. 156 S&F in repairs MCB 6-32 amps, 10 KA, SP 240 volt, C series complete all as specified and directed. 157 S&F in repairs MCB 32-40 amps, 10 KA, DP 240 volt, C series complete all as specified and directed 158 All as per item No 157 hereinbefore but MCB SPN 63 amps. 159 M&L in repairs of sub main wiring in ConcealedPVC conduitof required size 2 x 4 sqmm PVC insulated multistrand copper conductor FRLS with 01x4 sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed. Note:- For the purpose of payment two runs of 4sqmm conductors and one run of 4 sqmm conductor with conduit will be measured as one length. 160 M&L in repairs of sub main wiring in PVC Concealed conduit of required size 2x6 sqmm PVC insulated multistranded copper conductor with 01x6 Sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed.Note:- For the purpose of payment Two runs of 6 sqmm conductors and one run of 6sqmm conductor with conduit will be measured as one length. 161 S&F in repairs of LED slim square panel down light fitting for grid ceiling light of size 135mmx135mm, height 17.5mm, 10watt, colour white/warm white and including connected with 3 core 23/0.0076 insulated copper wire from celling rose to fitting connector all as specified and directed. 162 S&F in repairs environmental friendly ultra modern, energy savings surface mounted decorative hexagonal bulk head back lit LED luminaire comprising of high brightness LEDs of capacity 10W complete all as specified and directed. 163 S&F in repairs invertor LED 4 ft batten 20 Watt, 6500K with square profile and polycarbonate channel, lithium ION battery with charging time 8 Hours -10 Hours and backup time upto 4 hours indoor recess mounting with reflector and connector block and complete all as specified and directed. 164 S&F in repairs MCCB 4 Pole 125 Amps, 25 KA , 415V, 50 HZ , ICS=100% Icu, with adjustable thermal settings, suitable for isolation complete all as specified and directed. 165 Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall complete all as specified and directed. 166 Disconnecting and taking down existing Ceiling fan of any description and hanging it on the same location and connecting up complete from ceiling rose or connector to fan after overhauling, servicing/ rewinding if required, replacement of bearing, capacity and spray painting with synthetic enamelled paint with and including additional length of hanging rods, removing unwanted paint from the rubber and walls complete all as specified and directed. 167 Taking down water storage heater of any capacity and refixing the same comprising the following complete all as specified and as directed: -(a) Replacement of existing 4 nos, fasteners with bolts & washers.(b) Scrapping old paint completely, preparation of surfaces, filling of cavities and spray painting with synthetic enamel paint over a coat of red oxide primer.(c) Writing MES No. in black synthetic enamel paint.(d) Replacement of existing cable with flexible PVC insulated copper conductor cable of size 2.5Sqmm 3 core.(e) Replacement of existing plug top with 3 pin 15Amp plug top.(f)Replacement of apparatus assembly, heating assembly as per existing. Note: Apparatus assembly & heating element shall be measured & paid for separately under item No 168 & 169 168 Supply only heating element of existing rating, size and shape (as taken down vide item 167 here-in-before) complete all as specified and as directed. 169 Supply only apparatus assembly of existing size and shape (as taken down vide item 167 here-in-before) complete all as specified and as directed. 170 S&F, testing and commissioning of metering board CPRI approved outdoor type, floor mounted, factory made of Size 1metre x 0.75 Metre, 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having separate compartment for bus bars chamber with aluminium bus bars duly insulated by insulation of RYB colour 300 Amps rating mounted on porcelain insulators and mounting for MCCB as incomer. The cubical has 04 compartments of suitable size to accommodate 04 x energy meters, panel shall be factory made, Single door, made out of 2 mm thick MS sheettotally enclosed dust, vermin and rust prooffront operated, front and rear opening with locking arrangement fixed with MSangle iron frame of size 40X40X5 mmduly powder coated with 7 tank process with colour as directed including internal wiring with multistranded copper conductor cable of suitable size including lugs and cable gland to incoming and outgoing cable complete all as specified and directed. 171 M&L for taking down existing energy meter from the existing location and refixing it to same place after completion of work complete all as specified and directed. 172 Supply and laying and testing cable XLPE insulated, PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. 173 Excavation in trenches in hard/dense soil not exceeding 1.5 mtr width and not exceeding 1.5 mtr deep for laying of pipes in Hard/dense soil etc and getting out complete all as specified and directed. 174 Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick hard soil complete all as specified and directed. 175 Removing surplus soil to a distance n exc 50m and deposit where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
