Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. thickness of tiles 10 mm to 25 mm- 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. thickness of tiles 10 mm to 25 mm 2 Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). 3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 4 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 5 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 6 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet 7 Providing and fixing High Rib colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not lessthan 275 g/SQm 8 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 9 Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 10 Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 2nd class kail wood 11 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 12 providing and fixing of PVC class B wastepipes and fittings of good quality Is 14735 13 100 mm dia pipe 14 75mm dia pipe 15 provoidingand fixing of PVC collar 16 100 mm 17 75 mm 18 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-in- charge. 19 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4) 20 Internal work-exposed on wall with clamps at 1.00 meter spacing meter 205.80 PN-16 pipe , 25mm OD(SDR-7.4) 21 Providing and fixing PPR Unions 22 20mm 23 25 mm 24 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. 25 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms 26 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 27 Providing and fixing 20 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 28 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 29 Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. 30 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. 31 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore 32 Providing and fixing of imported wooden wall panelling of required thckness including the cost of jambs as required over 12mm thick plyboard including cost of plyboard with all necessary fittings fixtures adhesives, cornices as per the directions of engineer in-charge and all carriages complete including 3 or more coats of Sprit polish All Complete 33 Add Provision for Curtains for Office rooms & glazing for Windows at VIP hut and other unforseen items like glass sheets for window panes & manhole lid covers etc 34 Electrification of Works at TRC at Aharbal 35 Wiring for lighting points/fan points/exhaust fan points/call bell points with 2x1.5 sq mm FRLS PVC Insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit with 240V 6A modular switch modular plate, suitable Gl box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/Anchor/ SSK/KEI/RR or equivalent make) including the cost of conduit 36 Supply, Installation, Testing and Commissioning of 50W (Havells/ Phillips/Wipro skyline) new generation energy saving and environmental friendly long life LED Flood Light made up of pressure die cast Aluminum housing with high efficiency LEDs as lighting source with efficacy >110lm/w CRI>80,CCT>5000, Avg Life L70 50000 hours, No haremful UV and IR radiators, Operating Temp-10 to 45C, Surge Voltage Protection, IP66 Protection and impact resistance of IK07. The job includes replacement warranty of fixture if damaged/burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. 37 Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans 5 Star BEE Rated BLDC Remote Controlled, 30W,3 no. of blades, 340-410 rpm, AC 230V 50Hz, high Quality Copper Motor with double ball bearing incl. 1N Downrod, Shackle Assembly, cost of ceiling rose (if required) and making of necessary connections. The job includes replacement warranty of fixture if damaged/bunt out what so ever reason for a period of two years reckoned from the date of sucessful commissioning / handing over of site to the intending department. (To be got approved before installation from EIC). Crompton Energion Hyperjet/ V Guard Windle Deco/Havells Artemis.
