}

Tender For Re-Construction Of 01 No 12X88 Mtr. A.P.F. At N.M.Y. Amroha - Dismantling Corrugated Iron Roofs, Wall Of Partitions Including Purlins Battens And Vertical Support And Including Stacking Of Materials As Directed By Engineer-In-Charge With In A D, amroha-Uttar Pradesh

Rajya Krishi Utpadan Mandi Parishad has published Tender For Re-Construction Of 01 No 12X88 Mtr. A.P.F. At N.M.Y. Amroha - Dismantling Corrugated Iron Roofs, Wall Of Partitions Including Purlins Battens And Vertical Support And Including Stacking Of Materials As Directed By Engineer-In-Charge With In A D. Submission Date for this Tender is 15-09-2025. Dismantling Work Tenders in amroha Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

50837975
Tender For Re-Construction Of 01 No 12X88 Mtr. A.P.F. At N.M.Y. Amroha - Dismantling Corrugated Iron Roofs, Wall Of Partitions Including Purlins Battens And Vertical Support And Including Stacking Of Materials As Directed By Engineer-In-Charge With In A D
Tender
Indian
Uttar Pradesh
Amroha
15-09-2025

Tender Details

Tender For Re-Construction Of 01 No 12X88 Mtr. A.P.F. At N.M.Y. Amroha - Dismantling corrugated iron roofs, wall of partitions including purlins battens and vertical support and including stacking of materials as directed by Engineer-in-charge with in a distance of 60m. (200feet). SI No.701 2 Dismantling of girders, Trusses and other work including stacking of materials as directed by Engineer-in-charge with in a distance of 60m. (200feet). Sl No.702 3 Dismantled brick work or stone work in lime or cement mortar and including stacking or materials as directed by the Engineer-in-charge with in a distance of 60 meter (200 feet). Sl No.692 4 Excavation in foundation in ordinary soil includinglead upto 30 meter and lift upto 1.5 meter and including of excavated earth in to the trenches or in to the sapce of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer -in - charge upto a distance of 30 M. from the foundation trenches. S.I. No 251 (a) 5 Concrete with 4 cm. Gauge stone (single) ballast Course sand nd cement in proportion of 12:6:1 in foundation and under floor and includingsupply of II material labour and T&P etc required for proper completion of the work. S.I. no 273+(281-275) 6 R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:2:4 in raft foundation and footingof door & windows excluding supply of reinforcement and its bending, but including its fixing and binding wire and including necessary centering an shuttering etc. andsupply of all materials labour tools & plants etc required for proper completion of the workincludingcost of bindingwire. 287 7 S/F of R.S.J size 200x100 mm wt. per Rm 25.40 kg fixing in position as per side including wastage cartage supply of completion of the work. 8 M.S work in haevy size such as trusses builtup gates record racks roof work gate including rivetting or weilding where nessary S.I. No. 503 9 Supply and fabrication of tubler trusses carting at site of work and fixing the same over RSJ including drilling holes and fixing including supply of all bolt and nuts westage labour T&P required for completion of the work. S.I. No. 512 10 M.S. Iron work in small size and section such as holding down bolts, hold fast tierods gratings etc. wrought to required form including supply of steel bolts nuts, hinges etc. and their work. S.I. 502 11 M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend hooks, and authorized overlapping shall be measured and including cost of binding wire. S.i. No 504 12 Supply and fixing precoated galvanished Iron profile sheet 1000-1020mm cover width 28-30 mm high crest @250-265 mm c/c manufactured out of 0.50 nn TCT hi-tensile prepainted Galvalume Sheet Az-150 gsm Aluminium Zinealloy Metallie coating of total both sides 550 Mpa yield stress as per AS-1397) Exterior micron polyester back coat applied over 5 microns primer the sheet shall have wide pans with 3 small stifferning ribs for effective water shedding and special male/female with full return lgs on side laps for purlin support the male end of the sheet shall have anti capllary flute at side laps to prevent leakages the sheet shall be fixed by means of Galvanlsed self drilling self tapping fasteners (12-14x55 with EPDM seals).as per DSR12.5/2023 13 P/F precoated galansied steel steel roofing accessorise 0.50mm(+0.05%) total coated thickness with zinc coating 120 grms per sqm as per IS: 277 in 240 mpa steel grade 5-7 micronsepoxy primer on both side of the sheet and polyster top coat 15-18 microns using self tapping screws complete (DSR-12.51)2023 14 Paintingor varnishing work in smal are3as or new wood work withone coat (upto one square metre) ready mixed priming paint and 2 coat of superior quality ready mixed paint or varnish including supply of all materials. Labour tools & plants etc required for propercompletion of the work paint to be used should confirm the chapter No.15.1 (a+2+4(iii) 15 M-150 Brick work in 1:6 cement &coarse sand in foundation and plinth including supply of all materials labour tools & plants etc. required for completion of the work. (S.I. No. 305a 16 RCC Work with1:2:4 cement approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in lintels of door & windows excluding supply of rainforcement and its bending but including its fixing and binding the same with 24 BW GGI binding wire and including necessary centering and shuttering etc and supply of all materials labour T & P required for proper complition of the work. S.I. No. 283 17 12 M.M thick cementplaster 1:4 cement and coarse sand mortar over brick work including supply of all material labour and T&P etc. required for proper completion of the work . S.I. No 584 a 18 Earthfillingin plinth including carted earth fromdistance 8 km. from the site of work includingwatering ramming and dressing etc. in 20cm. Layers required for proper completion of the work as per direction of E/I. S.I. No. 253A 19 Sand filling in plinth including supply of necessary quantity of sand including watering dressing etc. for proper completion of the work S.I No-255A. 20 Cement concrect with 2 cm. gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Toll and plants etc. required for proper complection of the work. S.I. no.279 A 21 Finishing walls with superior quality water proof cement paint/snowcem of approved make and quality of new work with two coats to give even shade including preparing surface by the thoroughly cleaning and sand preparing and supply of all materials, labour and T&P etc. required for proper completion of the work. Sl No.660 22 Junior Engineer

Key Value

Document Fees
INR 11800 /-
EMD
INR 550000.0 /-
Tender Value
INR 66.02 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail