Tender For Construction Work Of Malti Complex Under Nagar Panchayat Ranipur - Excavation in soil mixed with moorum/ shingle/ kankar requiring the use of special T&P such as pickaxes, subbals etc.including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. S.I no - 252.Ch.4 2 Cement concrete with 4cmgauge approved stone ballast, approved coarse sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.PCC SI No.281.Ch-5. 3 R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in Footing excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 B W.G.G.I. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & T&P etc required for proper completion of the work. Binding wire cost being included in the item 287 -1st.Ch-5. 4 R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in Plinth beam/lighter beam excluding supply of reinforcement and its binding wire and including its fixing and binding the same with 24 B W.G.G.I. binding wire an including neccecary centering & shuttering etc & also including supply of all materials labour & T&P etc required for proper completion of the work. Binding wire cost being included in the item No-285 1st.Ch-5. 5 RCC work with cement approved coarse sand, and 2cm (3/4) gauge, approved stone ballast in the proportion 1:1.5:3 in Column, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost.SI No.288-1st.Ch-5. 6 Brick Work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in foundation Cement mortar 1:6 (1 cement : 6 coarse sand) as per sor S.I. No. DSR 6.34.Ch-6. 7 Brick Work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure Cement mortar 1:4 (1 cement : 4 coarse sand) as per sor S.I. No. DSR 6.34.Ch-6 8 Earth work in cutting or in Filling in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20) in depth and earthwork in embankment to be in 20 cm(8) layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (5fts) lifts and 30 m. (100) lead. The earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in-charge. S.I. No.253.Ch-4. 9 RCC work with cement approved coarse sand, and 2cm (3/4) gauge, approved stone ballast in the proportion 1:1.5:3 in Beam, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. s.i no -286(1) Ch-5. 10 RCC work with cement approved coarse sand, and 2cm (3/4) gauge, approved stone ballast in the proportion 1:1.5:3 in Slab, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. S.I. No.284 (1) Ch-5. 11 Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.SI. No. 504 12 12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.58(III) 13 15 mm thick plaster on rough side brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.59(3) 14 Providing and applying Plaster of paris putty of 2 mm Thickness over plasterod surfaco to prepare the surface even and smooth complete. S.I. No. New item Ref. DAR-13.26. Ch.-15. 15 One priming coat and Two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of work SI.No.649+650, Ch-15. 16 Finishing walls with water proof cement paint of approved makeand quality on new work with three coats to give an even shade including supply of all materials labour, tools and plants etc. required for proper completion of work.SI No.660+661 17 25 mm cement concrete flooring 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of size 12.5 mm and below) by laid over base concrete finished with floating coat of neat cement (base concrete to be paid separately) including fixing of glass strips. (Excluding cost of glass strips) SI. No. 14.69 Ch.-14. 18 Providing & Laying of 8 to 10 mm thick ivory or light shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of allmaterials, labour T& P required for proper completionofwork. S.I. No. New item-2, Ch-14. 19 Providing & Laying brick bat coba 100 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of cobamortar mixed water proofing compound in 1:4cement and coarse sand mortor finished smooth & top mashed false 30 cm x30cm and side wall parapet shall be monolythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonary cobawith top finishing plaster mixing with acetic water proofing compound @2% by weight & includingsupply of all materials labourT&P etc. required for proper completion of works. etc.(ch-11, SI New item-1) 20 Kota stone slab 20 mm thick in kitchen slab over 20 mm thick base of 1:4 cement morter laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab S.i no 14.43 (a), Ch-14. 21 Supplying and fixing roiling shutters of approved make of 80 x 125 mm. (3x3 1/2) guage cold rolled M.S. latha inter locked tbroughout their entire length and joined together at the end by cold locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operations complete but excluding the cost of top cover and spring. S.I.No. 520,Ch-10. 22 Providing and fixing 27.5 cm. long wire spring grade no. 2 for rolling shutter. S.I.No. 521,Ch-10 23 Providing and fixing top cover for rolling shutters. S.I.No. 522,Ch-10. 24 Providing & fixing ball bearing for rolling shutters. S.I.No. 523,Ch-10. 25 Mild steel or iron work in havy sizes such as trusses; builts up gates, door frames, record racks roof work, glltes etc. wrought to required form including drilling holes; rivetting or welding where necessary, and also including supply of steel, bolts, nuts etc.& their fixing required for proper completion of the work. SI. No. 503 Ch.-10. 26 Supply of approved MS windows and M.S grill and ventilators excluding cost of glass panes but including supply of all materials, its fabrication nut and bolt, hold fast required labour and tools and plants for proper completion of work as per direction of Engineer-in-charge and also including cost of handles, stays etc and one coat of red oxide paint complete in all respect at site of work. pg no 53 S.I. no. new item 3 27 Painting or Varnishing on iron works in small areas or new wood work with two coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the I.S.I.No. 103 1950 28 Providing and fixing Stainless steel(Grade 304) Ralling made of hollow tubes, channals, plates etc. Including welding,grinding, buffing,polishing and making curvature (wherever required) and fitting the same with nessacary stainless steel nuts and bolts complete i/C fixing the raillimg with nessacary eccessories and stainless steel dash fasterners, stainless steel bolt etc of required size, on the top of the floor of the site of wast slab with suitable arrangment as per approvel of Engineer-in-charge. S.I. No- New item-5, Ch-10. 29 Add 14.40% of Internal Electrical Work 30 Add 4% ofPower Wiring and Plug Work 31 Add 3.75% ofExternal Electrical Work
