Tender For Repair To Joinery Works In Tech Area At Af Stn Naliya; 1 Taking down shutters of any description area notexceeding 1 Sqm each easing & adjusting and refixing in the same opening, complete all as specified and directed. 2 Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening, complete all as specified and directed. 3 Taking down Shutters ofany description exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed. 4 Taking down chowkhat with shutter (without taking off shutter) ofany description not exceeding 1.5 Sqm each, complete all as specified and directed. 5 Taking down chowkhat ofany description exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. 6 Supply and fix 35 mm thick second classhard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (with out sash bars ) edges for receiving glass etc sizes of members of shutter as specified in SSR Part I Section 8, clause 8.20 (a), complete all as specified and directed. 7 Supply and fix for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 8 Supply and fix 35mm thick plain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. 9 Supply and fix 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed. 10 Supply and fix for mild steel works for holdfasts conforming to Fe-290 gde E-165, complete all as specified and directed. 11 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately under respective items of this Schedule/BOQ 12 Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid separately under respective items of this Schedule/BOQ. 13 Supply and fix 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 14 Material and labour for preparing surfaces of wood and wood based materials new of any description and girth not otherwise described and treating with tar or coal tar black paint at ends of post back of chowkats etc area tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm each complete all asspecified and directed . 15 Material and labour preparing surfaces of treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exceeding 0.1 sq. m each,with tar or coal tar black paint at ends of post back of chowkats etc each, complete all asspecified and directed . 16 Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube, complete all as specified and directed. 17 Forming jambs, etc, to openings (to foregoing item), including cutting, tooting and properly bonding into work, also facing, jointing and pointing to match existing work in CM (1:4), complete all as specified and directed. 18 Material and labour for preparation of newwood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 19 Supply and fix aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminiumalloy and fixed lenght of bolt 250mm, complete all as specified and directed. 20 Supply and fix in300mm long mild steel ordinary rat tail rodpattern springs including roller and roller plate, complete all as specified and directed. 21 Supply and fix in aluminium anodized tower bolts 150mm length, complete all as specified and directed. 22 Supply and fix in aluminium anodizedtower bolts 100mm length, complete all as specified and directed. 23 Supply and fix inaluminiumhandles casttype anodized 125mm size, complete all as specified and directed. 24 Supply and fix inaluminiumhandles casttype anodized 150mm size, complete all as specified and directed. 25 Supply and fix 75 mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. 26 Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. 27 Supply and fix floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm, complete all as specified and directed. 28 Supply and fix in repairs, 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and directed. 29 Supply and fix in repairs, 300mm long mild steel ordinary rat tail rodpattern springs including roller and roller plate, complete all as specified and as directed. 30 Supply and fix in repairs, aluminum anodizedtower bolts 150mm length, complete all as specified and directed. 31 Supply and fix in repairs, aluminiumhandles casttype anodized 150mm size, complete all as specified and directed. 32 Supply and fix in repairs, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm, complete all as specified and directed. 33 Material and labour for hacking out old broken sheet glass and fixing3 mm sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm, complete all as specified and directed. 34 Material and labour for hacking out old broken figured glass and fixing3 mm figured glass pin head type , ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm, complete all as specified and directed. 35 Supply and fix in repairs, aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed. 36 Supply and fixaluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed. 37 Supply and fix in repairs, harrison rails, aluminium alloywith fixing brackets, stops, rollers etc, complete all as specified and directed. 38 Supply and fix in repairs, 25mm dia stainless steel curtain rod cut to length and fixed with suitable bracket, complete all as specified and directed.Note :- Bracket shall be paid separately under respective item of this Schedule/BOQ. 39 Supply and fixin repairs, bracket suitable for 25mm diacurtain rod with steel screw /wooden plug, complete all as specified and directed. 40 Repairs to aluminium doors leaf area not exceeding 1.5 sqm by cleaning, greasing and easing for smooth functioning including replacement of unserviceable fittings, complete all as specified and directed.Note:- Spare parts if required shall be measured and paid separately under respective items of this Schedule/BOQ. 41 All as per serial item number 40.00 here-in-before but foor windows area not exceeding 1.0 sqm. 42 Supply and fix powder coated aluminium, three track sliding window frame of section size 92.00x 31.75x1.3mm comprising ofone No of fly proof shutter and two nos of glazed shutter frames of section size 40x18x1.3mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement, complete all as specified and directed. Notes :-(i) Fixing of glass in panels of window and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item.(ii) Aluminium alloy wire cloth in panels ofgauzed shutter shall be0.45mm nominal dia and average width of aperture 1.40mm, fixed with aluminium wire staples. (iii) Glass filling in panels of glazed shutter shall be 4mm thick tintet sheet glass. 43 Supply and fix in repairs, for aluminum anodised grill of 7 mm dia rod square, rectangular, circular or similar tupe of shape aperture not exc 7.00cm in length or width fixed with H or F channel 38 mm x 12 mm x 1.30 mm, (Sec No 8778) complete all as specified and directed.Make : Grill No 20 of Decoare or equivalent as approved by GE. 44 Supply and fix aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator ,partially glazed and partially louvers,outer frame & mullion on fabricated with aluminium section of size 82.50mmx38.00mmx1.70mm (Cat No. 20036),half portion glazed with 4mm thick frosted glass including rubber beading& glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including aluminium patti including fixing fixing of S.S wire gauge of .36mm dia and 1.40mm width of aperature with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fittings & fixure and fixed in position complete all as specified and directed. Note:- Section no given above are of make jindal,contractor may use similiar section of other make mentioned in CA. 45 Supply and fix anodised aluminium powder coating frame of standerd section for doors and partitions withdouble rebates including joining cleat for fixing etc., complete all as specified and directed. 46 Material and labour for powder coatedaluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 Nos.) suitable handle (2 Nos.), complete all as specified and directed.Note :- Glass / Wiremesh should be measured seperately. 47 Material and labour for sheet glass 4.8 mm thick ordinalry quality and glazing with aluminium beeds in squareexceeding 0.50 sqm in each pane, complete all as specified and directed. 48 Material and labour for 09mm thick prelaminated particle board, interiror grade, prelaminated on side with decorative choice laminationa and other side balancing white lamination fixed with screws to timber work or in aluminium door, complete all as specified and directed. 49 Material and labour for 12mm thick prelaminated particle board, interiror grade, prelaminated on side with decorative choice laminationa and other side balancing white lamination fixed with screws to timberor in aluminium partitions work, complete all as specified and directed. 50 Supply and fix double action floor spring Hydraulically regulated made up of minimum 1.25mm thick aluminum alloy alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed. 51 Supply and fix in repairs, Mortise lock vertical type, size 100 mm aluminium4 levers, complete all as specified and directed. 52 Supply and fix in repairs, Door closer hydralically regulated( aluminium extuded body), designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and directed. 53 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed. 54 Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces, complete all as specified and directed. 55 Material and labour for preparation of new surfaces of walls (upto 15 metre height) and applying 3mm thick wall care putty and two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. 56 Dismantling structural steel work including doors, gates, rolling shutters, etc. but excluding framed truss etc complete all as specified and directed. 57 Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed. 58 Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. 59 Supply and fix in repairs, mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, welded and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed. 60 Material and labour for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc primer complete all as specified and as directed. 61 Dismantling wooden boarding, any description, fixed in any position with screws, complete all as specified and directed . 62 Material and labour for 18mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown in drawing, complete all as specified and directed. 63 All as per serial item number 62.00 here-in-before but 12mm thick. 64 All as per serial item number 62.00 here-in-before but 6mm thick. 65 Material and labour for 0.90mm thick decorative laminate type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table, complete all as specified and directed. 66 Material and labour for 1st class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 1st class H.W.sectional area not exceeding 6 Sqcm, complete all as specified and directed. 67 Supply and fix brass hinges 75mm size extruded with stainless steel pin type D-11, complete all as specified and directed. 68 Supply and fix brass handles extruded fabricated type100mm size, complete all as specified and directed.
