Tender For Premic Development Work In Mandir Premice At -Khatangale Tal-Karveer Dist-Kolhapur (Lat-16.4008 Long-74.0453)2515-1238 - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Manual MeansItem / Page No : 1 / 115Specification No : Bd.A.1Spec. Page No : 259 2 Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (Lift upto 1.5 metre) By Manual MeansItem / Page No : 5 / 115Specification No : Bd.A.2Spec. Page No : 259 3 Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed, excetra)Item / Page No : 1 / 131Specification No : Bd.E.1Spec. Page No : 287 - 288Additional Specifications : 1. With additional specifications for controlled concrete.2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 4 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water, striking joints on unexposed faces and watering, excetra complete.Item / Page No : 1 / 146Specification No : Bd.H.1Spec. Page No : 329Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 5 Providing coursed rubble masonry first sort for pillars of trap / granite / quartzite / gneiss stones in cement mortar 1:6 including pointing with cement mortar 1:3, scaffolding and watering, excetra complete.Item / Page No : 13 / 147Specification No : Bd.H.40Spec. Page No : 345Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 6 Providing and fixing hand cut beam coursed as per design of kerli stones (size 300mm*2000mm) by using lime moortar mixing with jaggery belfal etc in proportion 1:6 with crushed sand including dressing and fixing watering scaffolding lead and lift etc complete (before execution exampe should be got approved from engineer in charge. Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. 7 Providing and fabricting structural steel work in rolled sections like joists, channels, angles, tees, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces, excetra and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, excetra complete.Item / Page No : 1 / 129Specification No : Bd.C.2Spec. Page No : 275 8 Providing and fixing hand cut slab stone masonary as per design kerli stones (size 1200mm*300mmof thickness 125 mm by using lime mortar mixing with jaggery belfal etc in proportion 1:6 with crushed sand including dressing and fixing watering scafoolding laad and lift etc complete (before execution ample should be got approved from engineer in charge. Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. 9 Providing and fixing Hnad Cut coursed stone masonary for flooring of kerli stone (size 300mm*150mm)of thickness 150 mm by using lime mortar mixing with jaggery belfal etc in proportion 1:3 with crushed sand including dressing and fixing watering scafolding lead and lift etc complete (before execution ample should be got approved from engineer in charge) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. 10 Providing and fixing Hnad Cut coursed stone masonary for flooring of kerli stone (size 300mm*275mm)of thickness 150 mm by using lime mortar mixing with jaggery belfal etc in proportion 1:6 with crushed sand including dressing and fixing watering scafolding lead and lift etc complete (before execution ample should be got approved from engineer in charge) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. 11 Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.)Item / Page No : 3 / 0Additional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 146 Dated 04/06/2021 and Government of Maharashtra Public Works Department State Schedule of Rates 2021-22 General Note Number A(v), Page 5.2. The amount of royalty charges will be paid only after submission of the receipt in original from Revenue authority for payment of royalty to Government, stating the name of work.3. Above / below percentage quoted by the contractor will not be applicable for this item. 12 Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0Additional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.2. Above / below percentage quoted by the contractor will not be applicable for this item. 13 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20 metre X 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on M.S.angle of size 35 milimetre X 35 milimetre X 3 milimetre frame with properly cross braced mild steel angles of size 35 milimetre X 35 milimetre X 3 milimetre duly painted including two mild steel angle iron posts of size 65 milimetre X 65 milimetre X 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures excetraand fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. number As directed by Engineer in ChargeItem / Page No : 36 / 47Specification No : MoRTH-801Spec. Page No : ---Additional Specifications : The work shall be carried out as per instructions of Engineer in charge. 14 Add insurance 0.50%Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. 15 Add G.S.T. 18%Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.
