Tender For Work Of Fabrication And Errection - Dismantling, Fabrication And Erection Of Old / New Pipe Lines Upto Size 12. Dismantling, Fabrication And Erection Of Tee Upto Size 12. Dismantling, Fabrication And Erection Of Nipples Upto Size 12. Dism, Mau-Uttar Pradesh

Tender For Work Of Fabrication And Errection - Dismantling, fabrication and erection of old / new pipe lines upto size 12.Dismantling, fabrication and erection of Tee upto size 12.Dismantling, fabrication and erection of Nipples upto size 12.Dismantling, fabrication and erection of Cross upto size 12.Dismantling, fabrication and erection of Bend upto size 10.Dismantling, fabrication and erection of Flange upto size 12.Dismantling, fabrication and erection of Reducer upto size 12.Dismantling, fabrication and erection of Blind upto size 12. Dismantling, fabrication and erection of Tee above 12 size.Dismantling, fabrication and erection of Nipples above 12 size.Dismantling, fabrication and erection of Flange above 12 size Fabrication and erection of heavy structure.Dismantling of light structure.Fabrication and erection of light structure.Do hard facing on the teeth of under feed roller of mill.Make and install new scraper in place of worn/cut off scamper of under feed roller of mill.Cut out the sore teeth of under feed roller and fabricate and install teeth as per drawing and do hard facing.Make the sore juice ring of side rollers of mill with new 6/8 mm thick plate as per sample.Replace both the pipes of the sore well conveyor of mill properly and fit them in the fitted trough and give trial.Cut the sore runner of can carrier, rack carrier, bagasse elevator and bagasse carrier and put it in the scrap yard and make a new runner with 50/65 mm flat, install it and give trial.Cutting out the neck/worn side plates of the can carrier and putting them in the scrap yard and fitting them with new 6/8 mm thick MS plates.Cutting out the discharge suit fitted below the fiberizer and putting it in the scrap yard and fitting it with 12 mm plate and giving a satisfactory trial Dismantling, fabrication and erection work of delivery line of bagasselo fan.Cutting and removing the plate on top of boiler and replacing it with a new plate.Cutting and patching of corroded side and bottom plates of bagasse elevator, RBC.Cutting and removing side plates of boiler no. 1, 2 and 3 and replacing the corroded plates and making and installing new ones as per sample from 5/3 mm plate as per requirement.Cutting and removing the corroded plates of expansion joint of air heater/economizer of boiler no. 1, 2 and 3 and making and installing a new joint as per sample and giving trial.Making and installing expansion bellows at various places in side plates of boiler no. 3 as per instructions.Cutting and removing the corroded A-suit of boiler no. 1 and 2 and making a new suit from new plate and fitting it and giving trial.Dismantling of damaged ribs of juice heater/vapor line juice heater. Fabrication and erection.Fixing a blind in the pipe above the vapor line juice heater and doing hydraulic test of it.After testing, removing the blind and connecting the pipe to its original condition.Dismantling of brass tubes of juice heaterFitting of brass tubes of juice heater Make a ring as per the instructions using angle/flat iron/MS plate etc. and fit it on the vapor pipe of the evaporator/pans.Dismantle the top cover of the sev all of the pans and make a new one and fit it by giving support etc. as per the sample.Strengthen the pan bodies from inside/outside with MS plate/angle as per the instructions.Dismantle the top cone of the pans and make a new one as per the sample and fit it. While working, support the sev all fitted on it and stop it and remove the support after the work and give a successful trial.Dismantling of old damaged manhole in save all/pan body/evaporator body of pan and modifying it as per instructions and installing flange system.Replacing cutover valve of pans.3Cutting out the weak part of quad/pan bodies as per instructions and replacing it with fabricated 12mm plate and giving successful trial.Dismantling, fabrication and erection of exhaust pipe of size 12 to 24 in steam exhaust pipe/vapor pipe under pans.Dismantling, fabrication and erection of exhaust pipe of size 20 and above in steam exhaust pipe/vapor pipe under pans.

INR 300 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB