Tender For Provision Of Certain Major Revenue Works At Afs Amla; 1 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed. 2 M&L for hardcore of guage n.exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. 3 Excavation for post holes (or similar holes) each n. exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for soft / loose soil and removing surplus soil to a distance n.exc 50mtr and making good surface in soft/loose soil complete all as specified and directed. 4 M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. 5 M&L for cement conrete 1:2:4 type B2 (using 40mm gradedstone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 6 M&L for Plain cement concrete B-0 type (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in copings, bed plates, benching and the like finished fair & even, including necessary form work complete all as specified and directed. 7 Dismantling fencing wire mesh of any size/type complete all as specified and directed. 8 Supply only chain link MS galvanised fencing of size 4 x 4 and dia of wire 4mm or any size or type complete all as specified and directed. 9 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, tightening complete all as specified and directed. 10 Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. 11 S&F framed workas in doors or gates ofangle or other section with gusset plates,rails braces etc complete drilled for fixing of steel sheeting or other covering.Doors etc to be preparedfor hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings,running rails and guides) and hanging; also fastening and fixing complete, Fe-410-W (Gde-250) quality A complete all as specified and as directed. 12 S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified anbd directed. 13 S&F Mild steel screw bolts (machine made) 11mm to 15mm dia of neck withhexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other endor screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 10 cm but n.exc 15 cm long complete all as specified and directed. 14 M&L for Mild steel round bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde. E-250) quality A or Fe 290 (Gde-E-165) complete all as specified and directed. 15 M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed. 16 M&L for brickwork with Fly ash bricks 75 kg/cmsq compressive strength. Modularsize , is straight or curved on plan exc. 6 metermean radius built in cement mortar 1:6 complete all as specified and directed. 17 M&L for rendering 15 mm thickon fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed. 18 M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali-resistant primer complete all as specified and directed. 19 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and direcetd. 20 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and direcetd. 21 M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works (rough finish) complete all as specified and directed. 22 S&F for framed work such as grills, gratings, etc,. with ends of bars shouldered and/or riveted, or forged into spikes; hold fast, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 23 M & L for restraining, resecuring and fixed in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. 24 Demolition of plain cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level (unreinforced concrete) including disposing of debris off the premises complete all as specified and directed. 25 M&L for 100 mm thick; Plain Cement Concrete (PCC) 1:2:4 Type B-2 (using 40mm graded stone aggregate), as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all specified and directed. 26 M&L for cement conrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 27 M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed. 28 M&L for 75 mm thick; PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed. 29 M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. 30 M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) Quality B) complete all as specified and directed. 31 S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and directed. 32 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 33 Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch A while deriving the Contract Sum for Acceptance.
