E- Tender For Repair And Maintenance Work At Jnv Barabanki (Up)-2Nd Call; Repairs to flooring 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 213.00 sqm 73.40 15634.20 1 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 25 mm thick 353.28 sqm 1948.25 6,88,277.76 2 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 14.08 sqm 2354.70 33,154.18 3 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 27.25 sqm 4481.30 1,22,115.43 Total of repairs to flooring 8,59,181.57 - Miscellaneous 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved. 10.65 cum 263.95 2811.07 1 15.3 Demolishing RCC works manually/ by mechanical means including stacking of steel bars & disposal of unservicable material within 50 metres lead as per direction of Engineer-in-charge 27.64 cum 3551.25 98,156.55 2 15.7 Demolishing brick work manually/ by mechanical means including stacking of servicable material & disposal of unservicable material within 50 metres lead as per direction of Engineer-in-charge - 15.7.4 In cement mortar 148.89 cum 2060.20 3,06,743.18 3 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 11.00 each 367.20 4,039.20 4 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material & disposal f unservicable material within 50 metres lead 172.40 cum 266.45 45,935.98 5 15.27 Demolishing mud phuska in terracing & disposal of material within 50 metres lead 27.64 cum 914.30 25,271.25 6 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 376.69 sqm 17.60 6,629.71 Repairs to door/windows 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 1.00 each 367.20 367.20 AR Providing and fixing bright /matt finished Stainless Steel Sliding Door Bolt of approved quality & make with necessary screws etc all complete. 250x16 mm. 2.00 Nos 2852.32 5,704.64 AR Providing and fixing bright /matt finished Stainless Steel Tower Bolt of approved quality & make with necessary screws etc all complete. 250x10 mm. 24.00 Nos. 791.61 18,998.64 AR Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.. 125 mm. 14.00 Nos. 554.97 7,769.58 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 3.68 sqm 2392.65 8,804.95 10.15.1 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 214.88 kg 195.20 41,944.58 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 79.20 kg 195.20 15,459.84 9.135.2 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all omplete. With 12 mm mild steel U beading 7.64 sqm 1228.00 9,381.92 10.30.1 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes 3.96 sqm 1064.65 4,216.01 .... more in document
