Tender For Maintenance Work Of Emo Office And Camp Office In Mathura. - Dismantling R.C.C. work manually by mechanical means including stacking of steel bars disposal of unserviceable material with in50 metereslead as per direction Engineer-in-charge. (SI No.-1 Ch-17) SOR 2022-23 2 Demolishing mud phaska in terracing and disposal of material with in 50 meteres lead as directed by Engineer-in-charge (SI No.-17 Ch-17) SOR 2022-23 3 Class-150(NonModular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth supply of all materials, labour and T&P etc. required for proper completion of the work. Add extra to item NO.-1 to 4 above for superstructure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including hoveey combed brick work in thickness of wall more than 12cm. (Ch-6 Sl No.-2 & 5) 4 Reinforced cement concrete work in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircases and spiral stair cases above plinth level upto floor five level, including the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone)(SI No.-13 Ch-5) SOR 2022-23 5 R.C.C. work providing and laying in position specified grade of reinforced cement concrete, slab including the cost of centering, shuttering, finishing and xcluding reiinforcement - above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone) ((SI No.-11 Ch-5) SOR 2022-23 6 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (As per analysis) 7.72 @ 1.50% @ 78.50 Qtl/Cum = 7 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (SI No.-2 Ch-13) SOR 2022-23 8 15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (SI No.-7 Ch-13) SOR 2022-23 9 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface of prepare the surface wven and smooth complete.Supply of all labour and T&P required for proper completion of work. (SI No.-6 Ch-15) SOR 2022-23 10 Painting Steel work with Deluxe Multi Surface Paing to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture, supply of allmaterials, labour, tools and plants etc. required for proper completion of work. (SI No.-18 Ch-15) SOR 2022-23 11 Painting wood work with Deluxe Multi Surface Paing to required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture, supply of allmaterials, labour, tools and plants etc. required for proper completion of work. (SI No.-18 Ch-15) SOR 2022-23 12 Walls painting with acryllc emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work supply of all labour material and T&P required for proper completion of work.(SI No.-20 Ch-15) SOR 2022-23 13 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm supply of alllabour material and T&P etc. required for prpoer completion of work. (SI No.-17 Ch-15) SOR 2022-23 14 Electrical workWiring for light point/fan point/exhaust fan point/call bell pointwith 1.5 sqmm FR PVC insulatedcopper conductor single core cable in surface / recessed PVC conduit,with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required. 15 Wiring for twin control light point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, 2 way modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required. 16 Wiring forcircuit / submain wiring alongwith earth wire withthe following sizes of PVC insulated,copper conductor single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. Earth wire 17 2 x 4 sq.mm. + 1 x 4 sq.mm. Earth wire 18 Supply and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required : 20mm 19 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 pair 20 Supplying and fixing metal box of following size (nominal size) on surface or recess with suitable size of phenolic laminated sheet cover in fromt including paintingetc. as required. 75 mm x 75 mm x 60 mm deep 21 Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mmX75 mm) 22 Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 23 Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing3 pin 5/6 amps. modular socket outlet and 5/6 amps. modular switch, connection, painting etc. as required. 24 Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps. modular socket outlet and 15/16 amps. modular switch, connection, painting etc. as required. 25 Supplying and fixing followingway, three pole and neutral, sheet steel, TP MCB distribution board, 415 volts,on surface /recess,completewithtinnedcopper busbar, neutral busbar, earth bar, din bar,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 4 way (4 + 12), Double door, horizontal type 26 Supplying & fixing single pole, blanking plate in the existing MCBDBcomplete etc. as required. 27 Installation of exhaust fanupto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing, commissioning etc. as required. 28 Add for Invertor Wiring in wiring Point for light/Fan/Plug with 1.5 mm Cu Wire 29 S/F of LED Tube Light with batten suitable for up to 1x22 watt LED tube light fitting including tube on surface complete in all respect. Category AAA 30 Supply of ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS : 374/79 and also comply with IS:1709/1984 with latest amendment the rated voltage 220/240 volts, 50 HZ single phase AC, the fan assembled should consists of down rod, blades, shackle canopies etc and with double ball bearing system. BEE 5 star rating - 1200 mm sweep 31 Supply & fixing of electronic Fan regulator (Modular), 120-280 V, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer of work. 32 Supplyof AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required. 33 MS GateExcavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.Ch- 4 S N -01) 34 Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work in Foundation and floors. ( Ch-5 S N -2 ) 35 RCC work Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in :1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size) All work upto Plinth Ch- 5 S N 10 36 RCC work Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in :1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) Ch- FoundationCh- 5 S N 12 37 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Above plinth level upto fifth floor levelCh- 5 S N 12 38 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage and over lapping and hookes required for completion of the work TMT Fe 500 39 Finishing walls with Acrylic Smooth exterior paint (Apex) of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm) 40 Providing and fixing angle iron frames for doors, windows and ventiators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T- Iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer- In- charge. 41 Painting on steel / G.S sheet with synthetic enamel paint of approved brand and shade New work two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution ( Ch-15 S N 18)
