Tender For Work Of Fabrication And Errection - Dismantling, Fabrication And Erection Of Old/New Pipe Lines Upto Size 12. Dismantling, Fabrication And Erection Of Tee Upto Size 12. Dismantling, Fabrication And Erection Of Nipples Upto Size 12. Disman, ghosi-Uttar Pradesh

Tender For Work Of Fabrication And Errection - Dismantling, fabrication and erection of old/new pipe lines upto size 12.Dismantling, fabrication and erection of Tee upto size 12.Dismantling, fabrication and erection of Nipples upto size 12.Dismantling, fabrication and erection of Casing upto size 12.Dismantling, fabrication and erection of Bend upto size 10.Dismantling, fabrication and erection of Flange upto size 12.Dismantling, fabrication and erection of Reducer upto size 12.Dismantling, fabrication and erection of Blind upto size 12.Dismantling, fabrication and erection of Tee above size 12. Dismantling, fabrication and erection of nipple above 12 size.Dismantling, fabrication and erection of flange above 12 size.Page1Dismantling, fabrication and erection of reducer above 12 size.Dismantling, fabrication and erection of blind above 12 size.Dismantling and erection of valve upto 10 size.Dismantling and erection of valve above 10 size Dismantling, fabrication and erection of tanks of rectangular/round/square etc. shape.Dismantling of heavy structure. (above 02 ton)Fabrication and erection of heavy structure.Dismantling of light structure.Fabrication and erection of light structure.Doing dad facing on the teeth of the under feed roller of the mill.Making and installing a new scamper in place of the worn/cut scamper of the under feed roller of the mill.Cutting and removing the throat teeth of the under feed roller and installing the teeth by fenestrating them as per the drawing and doing dad facing.Making the worn juice ring of the side rollers of the mill with a new 6/8 mm thick plate as per the sample.Replacing both the pipes of the worn out well conveyor of the mill properly and fitting them in the fitted trough and giving a trial.Cut the worn out runner of Cane Carrier, Rack Carrier, Bagasse Elevator and Bagasse Carrier and put it in the Scap Yard and make a new runner from 50/65 mm flat, install it and give it a trial.Cut the worn out/worn out side plates of Cane Carrier and put it in the Scap Yard and fit it with new 6/8 mm thick MS plate.Cut out the discharge suit fitted below the fiberizer and put it in the Scap Yard and make it with 12 mm plate and give it a satisfactory trial.Replace the worn out bottom trough and side plates of Rack Carrier with 08 mm plate.Cut out the juice tray fitted on the mill downs and make it with 6/8 mm plateand fit it as per drawing/sump and give a leak proof trial. Cutting and removing the boot (covered pony) of rack carrier and making a new one from 10/12 mm plates as per the old one and fitting it and trialling it.Cutting and removing the grooved hood of cane leveler/chopper and making and fitting it from 10/12 mm thick plate.Cutting and removing the grooved bay runner box of mill rack carrier and making and fitting a new box from new plate/angle in its place.Replacing the square bar of seed and trolley fitted on cane unloader which is in damaged condition with new square bar.Cutting and removing the groove plates of Donali suit in mill downs and making and fitting it again from new/old plate and trialling it.Repairing the old damaged racks of rack carrier by straightening them as per sample/instructions and strengthening them.Cleaning and painting the inside and outside of boiler chimney.Cleaning and whitewashing the condensate receiving tank of boiler.Dismantling, fabrication and erection of the delivery line of bagasilo fan Work.Cutting and removing the plate on the top of the boiler and replacing it with a new one.Cutting and patching the corroded side and bottom plates of bagasse elevator, RBC.Cutting and removing the side plates of boiler no. 1.2 and 3 and replacing the corroded plates and making and installing new plates from 5/3 mm plate as per the requirement.Cutting and removing the corroded plates of the expansion joint of air deaerator/economizer of boiler no. 1.2 and 3 and making and installing a new joint as per the sample and giving trial.Making and installing expansion bellows at various places in the side plates of boiler no. 3 as per the instructions. etc.

INR 300 /-

Refer document