Tender For Civil Works Such As Dismantling, Shifting & Filling Trench And Cc Work, B/Work Required Forvacation Of Nsp Rsu (Rented Shop) New Delhi Balance Work I.E B/Work,Doors, Windows Etc. At Kp Plaza New Delhi; 1 Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc., complete. 10.00 One Cum Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 9.00 One Cum Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 4.00 One Cum Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2.40 One Cum 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size). 1.00 One Cum 5 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 58.00 One Kg Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 22.50 One Sqm For doors, windows, partitions , ventilators, openable shutter including chawkhat frame etc. 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 97.00 One Sqm 6 Price Schedule Name of work:-Civil works such as dismantling ,shifting & filling trench and CC work,b/work required for vacation of NSP RSU (Rented shop) New Delhi balance work i.e b/work ,doors, windows etc. at KP Plaza New Delhi 2 3 4 7 8 Hiring of Electric welding Machine at site of work (for outdoor site of works) including its carriage from local market to site of work. Replace the existing damaged & badly rusted steel members of Steel Doors/Windows/Ventilators/Chowkhat/Jaal /Staircase/Ladder/ Railings/Grills/Big & small size main Gates and similar type of steel structure after cutting the faulty parts by Cutter Machine and fixing in position with proper welding between new and old M.S. items wherever required for proper functioning of the same etc. all complete as per the directions of Engineer-in-Charge. [Note: - Rates are all inclusive Hiring cost of Welding Machine, welding rods & all necessary labours for fixing, welding & replacement of faulty parts but cost of replaced parts shall be paid separately.] 1.00 Per day 9 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 10.00 One Cum 10 Shifting of dismantled material inclding stacking,loading and unloading of dismantled material received from work i.e aluminium members,boards,steel work etc from site at NSP RSU to civil store at Rohini or other MTNL building up to a lead of 10 km all complete as per direction of Engineer -in-charge Note:-The contractor shall arrange for all necessary permission from local authorities,traffic etcfor shifting of dismantle materials. 1.00 Each Credit to work:(Only for unusable scrap items) Aluminium Members -20.00 One Kg Reinforcement bars / M.S.Section/old G.I. Pipe -23.00 One Kg Prelaminated Particle board of allthickness -18.00 One Sqm Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 4.20 One Sqm 13 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm 4.00 each Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 100x10 mm 8.00 each 11 12 14 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm 8.00 each Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 80.00 One Kg Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. 15.00 One Sqm 18 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 1.50 One Sqm 19 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 25.00 One Kg