Renovation Of Suit No.5 And 6 Of Ohpc Guest House, Chep, Chiplima- 1 A. CIVIL WORKS: Dismantling and removing 2.5 cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. 2 Removing of cement plaster from walls including racking out joint to 12 mm deep and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. 3 Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. 4 Dismantling and removing i.e. Marble chips flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. 5 Dismantling and removing i.e. Marble chips dados and skirting from wall including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. 6 Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead and lifts as per direction of Engineer-in-charge. 7 Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead and lifts as per direction of Engineer-in-charge. 8 Brick masonry in cement mortar (1:6) using Fly Ash bricks 25cmx12cmx8cm size having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using in superstructure including hoisting, placing in position, scaffolding splays, cutting circular moulding and curbelling, champering and similar such type ofwork, watering, curing to required time etc. including cost, conveyance and taxes of all materials and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge. 9 16 mm thick cement plaster (1:6) in finished smooth to inside/outside rough surface of walls after racking out the joints including watering, curing to required time, cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge. 10 Supplying, fitting and fixing of 10mm thick DIGITAL GLAZED VITRIFIED TILES ( Double charged full body Vitrified tile) in floor of size 600mm x 600mm of make Kajaria/Somany/ NITCO/ Simpolo/ Varmora conforming approvedto IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with whitecement of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge. (for new work only) 11 Providing and laying CERAMIC TILES in floor of size 600mm x 300mm of make Kajaria/Somany/ NITCO/ Simpolo/ Varmora with approved and laid on a bed of 25mm thick cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete. including cost of materials, conveyance, royalty, taxes & cost of labour with T & P required etc complete as per direction of Engineer-in-charge. 12 Fixing GLAZED CERAMIC TILES in walls of size 600mm x 300mm of make Kajaria/Somany/ NITCO/ Simpolo/ Varmora with approved and laid on 12mm thick bed of cement mortar 1:3 jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete. including cost of materials, conveyance, royalty, taxes & cost of labour with T & P required etc complete as per direction of Engineer-in-charge 13 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm as per direction of Engineer-In-Charge. 14 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. 15 Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlock, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension). (Area of window above 1.75 sqm) 16 Finishing wall surface with wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding saging charges with cost of all materials, taxes, labour, T &P etc. complete as per direction of Engineer-in-Charge. 17 Interior Priming one coat with interior primer (Asian Paint/Berger Paint/Nerolac paint or equivalent) of approved primer on Plastered surface after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge. 18 Wall painting two coats with interior emulsion (Royale shyne of Asian Paints/Silk Luxury Emulsion of Berger paint/ Impression Ultra HD of Nerolac Paint or equivalent) paint of any approved shade over the interior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge. 19 Painting two coats any approved shade of paint on new iron/wood work after cleaning the surface, sand papering etc. including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge. 20 Wall Painting two coats with Weather seal coat paint of any approved shade over the Exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge. 21 B. INTERIOR WORKS:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, includingfixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I). 22 Supply and installation of solid ply panelling of 12 mm thick ply finished with approved laminate as per the design of Doors and windows, all complete including the cost of labour and material, all complete as per the direction of Engineer-In-Charge. 23 Providing and fitting of Solid ply panelling for the TV unit of Size (6 x 6) as per the design finished with laminate and PVC decorative panels including all cost of labour and material, all complete as per the direction of Architect-In-Charge. 24 Supply and Fitting of TV unit lower storage of size (6 x 1-6 x 1-2) as per the design given by the architect, finished with laminate as approved, with all necessary hardware fittings including all cost of labour and material. All complete as per the direction of Engineer-In-Charge. 25 Supply and Installation of 19 mm granite counter top for the basin and pantry with required adhesive over the solid ply platform. Including the cost of labour and material, all complete as per the direction of Engineer-In-Charge. 26 Supply and Fitting of dressing unit of size 3 x 18 x 18, made up of solid ply and laminate finish. Including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. 27 Supply and installation of pantry counter made up of solid ply with laminate finish as per the design. Including all cost of labour and material, all complete as per the direction of Architect-In-Charge. 28 Providing and fixing of 5mm clear mirror for the room of size 18 x 30, pasted over solid ply with baveled edges. including all cost of labour and material, all complete as per the direction of Engineer-in-charge 29 Providing and Fixing of 5mm clear mirror with led lights self-glow for the toilet of size 4-0 x 2-6, pasted over solid ply with baveled edges. including all cost of labour and material, all complete as per the direction of Engineer in charge. 30 Supply and fitting of roman blinds as per the approved shade and design including all cost of labour and material, all complete as per the drection of Engineer-InCharge. 31 Supply and installation of 12 mm toughened glass partition for the bath area, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. 32 Supply and provision of floor rug as approved design including cost of material, all complete as per the direction of Engineer-In-Charge. 33 C. PLUMBING AND FIXTURE WORKS:Supplying all materials, labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification as per direction of ENgineer-in-Charge. 34 Supply all materials, labour and T & P and fixing to walls, ceiling and floor unplasticized UPVC pipes conforming to (ASTM-D-1785/89, Sch-80), following diameter with fittings and clamps including testing as per specification all complete as per the direction of Engineer-In- Charge. 35 25 mm dia 36 20 mm dia 37 15 mm dia 38 Providing and fixing on wall face unplasticized rigid PVC soil, waste and rain water pipes conforming to IS: 13592 Type-A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion (i) Single socketed pipes as per direction of Engineer-in-Charge. 39 110 mm dia 40 75 mm dia 41 Fixing 100mm size P trap (with / without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1: 1) as per specification including testing, all complete as per the direction of Engineer-In-Charge. 42 Fixing 100mm size Nahini trap for floor & wash basin including jointing the trap with pan in cement mortar (1: 1) as per specification and Fixing 100mm size Nahini trap for floor & wash basin including jointing the trap with jally in cement mortar (1: 1) as per specification including testing, all complete as per the direction of Engineer-In-Charge. 43 Supply, Installation and testing of wall Hung EWC Make CERA-Cosmic-S1044142 with duroplast seat cover, Including cost of all labour and material. All complete as per the direction of Engineer-In-Charge. 44 Supply, Installation, testing and commissioning of concealed cistern Make: CERA - CHEVRON - B1110101, including all accessories and fittings as required, all complete as per the direction of Engineer-In-Charge. 45 Supply, Installation, testing and commissioning of counter top basin with waste coupling MAKE: CERA - CATMID - S2020158, all complete as per the direction of Engineer-In-Charge. 46 Supply, Installation, testing and commissioning long body basin mixer MAKE: CERA - F1018452CH, all complete as per the direction of Engineer- In-Charge. 47 Supply, Installation, testing and commissioning CP 300mm Bottle Trap MAKE: CERA - F8060401, all complete as per the direction of Engineer- In-Charge. 48 Supply, Installation, testing and commissioning of shower cp Single Lever Concealed Diverter System consisting of Exposed & Concealed Part with the required accessories and Spout with Wall Flange, all complete as per the direction of Engineer-In-Charge. MAKE: CERA - BROOKLYN - F1018701 - F4010101, SPOUT - F1018661 49 Supply, Installation, testing and commissioning of pvc connecting pipe, all complete as per the direction of Engineer-In-Charge. 50 Supply, installation, testing and commissioning of cp shower arm and cp shower rose, all complete as per the direction of Engineer-In-Charge. MAKE- CERA - SHOWER ARM - F7040104, SHOWER ROSE - F7010211SS. 51 Supply, installation, testing and commissioning of 100mm dia cp grating, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. 52 Supply, installation, testing and commissioning of cp angle cock, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. MAKE; CERA or any other equivalent Make. 53 Supply, installation, testing and commissioning of cp stop cock 15mm, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. MAKE; CERA - F1013351, F4050102 54 Supply, installation, testing and commissioning of cp health faucet with connecting pipe, including all cost of labour and material, all complete as per the direction of Engineer-In- Charge. MAKE: CERA, F8030401A 55 Supply, installation, testing and commissioning of cp toilet paper holder, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. MAKE; CERA or any other equivalent Make 56 Supply, installation, testing and commissioning of liquid soap dispenser, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. MAKE: CERA - F5013101CH 57 Supply, installation, testing and commissioning of soap disc, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. MAKE: CERA - F5013106CH 58 Supply, installation, testing and commissioning of towel rail, including all cost of labour and material, all complete as per the direction of Engineer-In-Charge. MAKE; CERA or any other equivalent Make 59 D. ELECTRICAL WORKS:(DA) WIRING:Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 60 Group A 61 Group B 62 Group C 63 2way 64 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 65 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for 15A PP & Switch Boards 66 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire for AC & Gyser Point 67 4 X 6 sq. mm + 2 X 6 sq. mm earth wire for P.BDB 68 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 69 Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 70 Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including painting etc as required. 71 75 mm X 75 mm X 60 mm deep 72 100 mm X 100 mm X 60 mm deep 73 150 mm X 75 mm X 60 mm deep 74 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 75 1-2 Module 76 3 Module 77 6 Module 78 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate, switch box etc. as required. 79 15/16-amp Switch 80 23 pin 5/6 amp socket outlet 81 6 Pin 15/16-amp socket outlet 82 TV antenna socket outlet 83 Bell push 84 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 85 Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 86 Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 87 Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 88 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 89 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 90 Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 91 Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required Up to 450 mm sweep. 92 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 93 (DB) SDBS, MCB, ISOLATOR, CABLE & PANELS:Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 94 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 95 Single Pole 96 Double Pole 32 Amp 97 Double Pole 40 Amp 98 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 99 Supplying and fixing 40 Amps rating, four pole, (Three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 Supply, Installation, Testing & commissioning of ABC type fire extinguishers of5 kg capacity including all other materials & taxes as directed by site-in-charge. 101 (DC) FITTING & FIXTURES:Supplying of Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting FRLSame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved make including with all, materials & labour. (Make Usha- Crisp Air or Equiv.-HYBEC/Havells/Bajaj). 102 Supplying of 1200 mm energy efficient ceiling fan as per EIC of approved make including with all, materials & labour. (Make Usha-Striker or Equiv.- HYBEC/Havells/Bajaj) 103 Supply, Testing & commissioning of Surface mounting 1 x 12W LED surface mounted circular/square down light fitting with powder coated polycarbonate housing including 12watt LED luminaire as per EIC of approved make including with all, materials & labour. (Make WIPRO- Model-LD80-101-XXX-60-SMWH SM /SS make of Philips/HYBEC/ Havells) 104 Supply, Testing & commissioning of wall mounting 8/ 10W LED Decorative wall light fitting with Matt gold finish body including LED luminaire as per EIC of approved make including with all, materials & labour (Make JAQUAR/ Philips /CG/ Wipro/ HAVELLS) 105 Supply, Testing & commissioning of 2W LED Indoor Foot/Floor washer light as per EIC of approved make including with all, materials & labour. (Make JAQUAR/ Philips /CG/ Wipro/ HAVELLS) 106 Supply, Installation, Testing & commissioning of indoor Flexible Warm White LED strip Light of 25W/Spool with Driver for cove lighting including all other materials as required (Make JAQUAR/ Philips /CG/ Wipro/ HAVELLS)
