Tender For Miscellaneous Civil Works At Sep; 1 Dismantling of RCC floor concrete, beams, column footings, drainage pit etc., Details as per Sl No 1 in BOQ 2 Providing & laying of Reinforced Cement Concrete RCC (M20 Grade as per IS 456) for footings, tie beams, sump, pit, bund, hump etc.Details as per Sl No 2 in BOQ 3 Providing & laying lean concrete for handrails to a height of 1m from step using 6mm metal granite, m-sand,to a thickness of 40-50mm, curing, including usage of quality material as approved, cost, conveyance, lead, lift of all materials, labour, necessary scaffolding etc. Details as per Sl No 3 in BOQ 4 Supply & Laying reinforcement High yield strength deformed bars Fe 500 grade, cutting to required size, bending, straightening& placing in position, binding etc. Details as per Sl No 4 in BOQ 5 Providing shuttering / formwork using plywood with sufficient wooden runners or MS sheets with enough strength to withstand the load of mechanical vibrator during compaction of concrete. Details as per Sl No 5 in BOQ 6 Providing masonry work in CM 1:5, using standard size concrete blocks of good quality including racking out of joints, finishing to proper lines levels, curing, scaffolding, and platform required for the work etc., complete. Details as per Sl No 6 in BOQ 7 Providing 12mm cement plaster of mix 1:5 (1 cement :5 coarse sand) for fair faces using good quality M-sand, one coat floated hard and trowelled smooth, finished with a floating coat of neat cement including cement grout and curing etc. Details as per Sl No 7 in BOQ 8 Providing & fixing good quality vitrified tiles of 600mmx600mm or 600mmx1200mm, 8mm thickness anti-skid, anti-strain & scratch resistant at all levels in floor & wall area of Toilet, approved design, shade & finish, laying with tile adhesive after chipping & removing of existing tiles from masonry surface(if required)providing spacers between the tile joints 4mm and filling the gap using suitable epoxy joint fillers etc. Details as per Sl No 8 in BOQ 9 Providing and fixing 18 mm to 20mm thick single side mirror Polished, machine cut, good quality granite top, jet black and plain texture laid over the concrete slab / bed after chipping & removal of old tiles, filling the gaps/undulations, approved shade & finish of required size as per site condition with opening for ceramic sinks etc. Details as per Sl No 9 in BOQ 10 Supply, fabrication & erection of MS structural supports such as columns, rafters, tie beams, structural steel jacketing for RCC column/beams ,monkey ladder,staircase, purlins, wind bracing, cross bracing, roof supports, side cladding angles, louvers, supporting cleats, stiffeners, battens, joint plates, and other supports etc.Details as per Sl No 10 in BOQ 11 Supply, cutting and fixing of PVC foam board 9mm thick for cabins, partitions etc. Details as per Sl No 11 in BOQ 12 Supply, cutting and fixing of 3mm thick polycarbonate sheet for cabins, partitions etc. Details as per Sl No 12 in BOQ 13 Supply and fixing FRP doors suit to existing site condition, with door frame, fully moulded of single leaf of thickness 28mm, wooden shade.Details as per Sl No 13 in BOQ 14 Supply & fixing powder coated aluminium ventilator using section size of 50mm x 25mm approx, 1.2 mm thickness or nearest, clear glass louvers of 5mm thick at 120mm center to center with sufficient dividers suit to site.Details as per Sl No 14 in BOQ 15 European water closet. Details as per Sl No 15 in BOQ 16 Half pedestal washbasin.Details as per Sl No 16 in BOQ 17 Pillar cock. Details as per Sl No 17 in BOQ 18 Bib cock.Details as per Sl No 18 in BOQ 19 Angle cock.Details as per Sl No 19 in BOQ 20 Health faucet. Details as per Sl No 20 in BOQ 21 Floor trap.Details as per Sl No 21 in BOQ 22 Supply & Fixing ceramic sink with CP waste coupling, PVC drain pipe, PVC connection in required size, white colour suitable for laboratory purpose. Details as per Sl No 22 in BOQ 23 Providing & fixing good quality Chromium plated laboratory sink cock (three way).The sample & brand shall be approved by Engineer-in-charge before purchase of the item. Details as per Sl No 23 in BOQ 24 Supply andfixing of PVC pipe 25mm-50mm dia PVC pipe of 15 kg/cm2 pressure rating including bends, tees, Brass threaded elbows for fixing angle cocks, bib cocks, any other specials required for the work etc. Details as per Sl No 24 in BOQ 25 Supply andfixing of PVC pipe 60-110mm of 4kg/cm2 pressure rating including bends, tees, Brass threaded elbows for fixing angle cocks, bib cocks, any other specials required for the work, fixing closet outlet drains etc. Details as per Sl No 25 in BOQ 26 Engaging core cutting machine for providing 25mm -150mm dia core using diamond wheel to a thickness of 300mm for drainage holes on floor for fixing of HDPE pipes. Details as per Sl No 26 in BOQ
