Tender For Emergent And Day To Day Maintenance Works Of Janana Cottage Wards And Attached Facilities, Udaipur - 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm 2 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. 4 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. 5 Removing aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 6 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 7 Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75Cement mortar 1 : 6 (1 cement : 6 coarse sand) 8 Plaster on new surface on walls in cement sand mortar 1:6 including rackingofjointsetc. complete fine finish :20 mm thick. 9 Cement plaster 1:3 under old stone slabs with admixture (gur,nails,binding wire to mesh and scraping scales & dressing joints of slabs complete.Proofing upto 25 mm thickness. 10 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 11 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 12 Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 13 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. 14 Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm 15 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 16 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester mattconsisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane.3 mm thick 17 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:35 mm thick .Commercial Veneer both side 18 Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 19 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : 20 Style / rail of teak wood 30mm thick/ Aluminium Section 6 wide 21 Panel by Shuttering Ply - 9mm thick (Commercial) 22 Aldrop of mild Steel 12 long x12mm dia 23 Aldrop of mild Steel 8 long x10mm dia 24 Mild Steel Tower Bolt 6 long 25 Steel hinges - For Wooden Chowkhat 4 size 26 Steel Handle 6 size 27 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete 28 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 29 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.New Work 30 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : new work 31 Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. 32 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 33 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). ExtraforusingMarbleprinted/Graniteshadeordarkshadetilesinsteadofwhite,grey,ivory,fumeredbrown,lightgreen,lightblueandotherlightshadesinglazedtilesandMATfinishedtiles. Extraforusingsize above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size. 34 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jalore (P-white / S-white/ Rosy Pink colour) Up to 1500 Cm2 Tiles 35 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design 36 Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :- 37 Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. 38 Applying Epoxy primer on the exposed steel bars. 39 Applying Epoxy hardener and resin mix (as per manufectureds specification) on concrete and steel bars with brush. 40 Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. 41 Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. 42 Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. 43 Providing and fixing double scaffolding system on the exterior side, upto five story made with 4 wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding.Note : This item to be used for maintence work judicially 44 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 45 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge 46 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 47 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.0.80 mm thick with zinc coating not less than 275 gm/m2 48 Providing and fixing curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs, etc wherever necessar complete 20mm 49 Prunning & trumming and cutting of old big trees on the road side The contractor will deposit the cut wood in the Deptt. 50 Carriage of Following Material including loading unloading and stacking if require complete in all repsect.Earth Sand,Lime Morrum Manure or Sludge building rubbish stone metal(Grit & Ballast) Stone for masonary work & Soling and excavated rock etc. For lead 10 Kms 51 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. 52 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 53 P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I White for EWC. 54 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVCbend as per IS : 7231 . 55 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 56 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm 57 P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : Fire clay glazed kitchen sink (I.S 771-1985Marked) size 600 x 450 x 250mm. 58 P&FFlushCock / FlushValve (IS :9758Mark)forWCofapproved quality make :CP brass push type Half-turn exposed 25mm nominal bore. 59 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: 60 C.P. Brass bib cock,15mm nominal bore. 61 (-do-) Long body, 15mm nominal bore weight not less than 690 gm 62 (-do-) Elbow-action, 15mm nominal bore. 63 Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore,15mm, 86 mm long. 64 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make: 65 C.P. Pillar cock, 15 mm dia nominal bore 66 C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. 67 Synthetic Material (PTMT) Pillar cock of approvedquality / make15mmnominal bore. 68 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make:C.P. Brass 15mm nominal bore. 69 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 70 P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe withC.P. Brass nuts upto length, 600mm 71 P& F waste Pipe with all fittingP.V.C with C.Pnut 32 mm 72 P & F Grating of approved quality/make:C.P. brass with frame (Heavy) & superior quality size 125mm dia. 73 P & F C.P. brass Doom Waste Coupling 32 mm dia. 74 P& F waste Coulping with fittings of approved quality /make: C.P Brass 32 mm dia 75 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.Not less than 800 gm, 32mm. 76 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 77 Gun-metal 25mm nominal bore. 78 Gun-metal 40 mm nominal bore. 79 Gun-metal 50 mm nominal bore. 80 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 81 20mm nominal size 82 25 mm nominal size 83 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 84 25mm dia nominal bore B Class 85 40mm dia nominal boreB Class 86 50mm dia nominal boreB Class 87 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 88 25mm dia nominal bore 89 40mm dia nominal bore 90 50mm dia nominal bore 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work). 92 25 mm nominal size 93 50 mm nominal size 94 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 95 75mm dia 96 110mm dia 97 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 2000 litres 98 Hoisting Charges for each floor : For items 2.26.5 to 2.26.8 99 Providing and fixing superior quality PVC Tank Cover complete as per approved by Engineer In Charge 100 Above 500 Lt. capacity 101 Supply of Safeda ballies 125 mm diameter 102 Supply of C.I. bracket for wash basin and sinks 103 Supply of Brass bib-cock 15 mm dia 104 Supply of Brass stop-cock 15 mm dia 105 Supply of Indian type white glazed vitreous china Ist quality W.C. orissa panSize 580x440 mm. 106 Supply of European type white glazed vitreous china Ist quality W.C. pan 107 Supply of WVC Urinal Flat Back (large) or half stall size 590x375x390 mm. 108 Supply of Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend as per IS : 7231 109 Supply of brackets 110 Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia 111 Supply of Brass full way valve with C.I. wheel (screwed end) 50 mm dia 112 Supply of C.P. brass waste coupling 40 mm 113 Supply of P.V.C Waste pipe with C.P. nut 40 mm dia 114 Supply of Vitreous china flat back wash basin 550x400 mm 115 Supply of Jet spray for water closet with C.P. Copper Tube flange 116 Supply of C.P. Pillar Cock 15 mm nominal size 117 Supply of GratingStainless Steel Sheet size 125mm dia. 118 Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. 119 Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. 120 Supply of U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 75 mm dia. 121 Supply of U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia. 122 Supply of Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete 123 Supply of 9 mm thickcommercial ply 124 Supply of 30 mm thick prelaminated flush door shutter 125 Supply of 15 mm PTMT bib cock 126 Supply of PTMT pillar cock 127 Supply of PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball 128 Supply of PVC Tank CoverAbove 500 Lt. capacity 129 Supply of SS wire gauge 130 Supply of 5mm Thick Float Glass (ISI make) 131 Supply of Oxidised mild steel sliding door bolt 300x16 mm 132 Supply of Oxidised mild steel tower bolt (barrel type) 250x10 mm 133 Supply of G.I. pipes 50 mm dia (B Class) 134 Supply of G.I. pipes 80 mm dia (B Class) 135 Supply of G.I. Union 50 mm nominal bore 136 Supply of G.I. Union 80mm nominal bore 137 Supply of C.P. Brass angle valve 15 mm 138 Supply of 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts 139 Supply of Carpenter 1st class 140 Supply of Carpenter 2nd class 141 Supply of Fitter (grade 1) 142 Supply of Assistant Fitter or 2nd class Fitter
