Tender For Faning Work Of Different Location in Kbmc Area. Phase 1 - Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 3 Dismantling brick masonry in lime or cement mortar and stacking thematerils asdirected with all leads, lifts etc. 4 Dismantling stone masonry in lime or cement mortar including stacking thematerilsas directed with all leads, lifts etc. 5 Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately 6 Transplantation of trees having girth between 2 to 5 at samelocation 7 Transplantation of trees below 2 girth at same location 8 Removing G.I. orA.C. sheet roofing includingpurlins, principal rafters etc. includingsortingserviceable and unserviceable materials, stacking the same as and wheredirectedinthe compound including scaffolding etc. complete. 9 Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. 10 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 11 Transportation of Excavated Material Obtain From Excavation Including Loading, Unloading & stacking upto 5Km etc Complete.5 Km = 5000m, Lead = 252.22 For Permeter=(252.22/5000)=0.05/meter.Total Lead=(5000-50)=4950 meter (4950*0.05)=247.50 12 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 13 Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) 14 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 15 Providing and laying in situ / ready mix controlled grade of M25 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc ), excluding reinforcement) 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 17 Providing and laying Cast in situ/Ready Mix C.C. M-25 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/pumping, compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 18 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 19 Providing and fixing heavy duty interlocking concrete Rubber mould glossy paving blocksof 80 mm thickness of having a strength of 400 Kilogram /Sq. cm. of approved quality andshape on a bed of crushed sand of 25 to 3 0mm thick including skirting joints andcleaning etc. complete. (using 100% crushed sand) 20 Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) 21 Providing and laying chequered tiles of approved quality of size 30 cmx 30 cm,confirming to corresponding I.S. for flooring in required position laid on a bed of1:4 cement mortar in cluding cement float, filling joint with cement slurry cleaning curingetc. complete. 22 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb withoutgutter ( as per IRC 861983) embedded 125 mm below ground level over M-10 PCCfinished neatly with C.M. 1:2, setting the same inC.M. 1:2, including the requiredexcavation in any strata and removing the excavated stuff any where in city and redoingthe surface as specified and directed by Engineering In-charge.Using Concrete Batchingand Mixing Plant 23 Providing and fabricating structural steel work in rolled sections like joists, channels,angles, tees etc. as per detailed design and drawings or as directed includingcutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including on ecoat ofanticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete. 24 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material 25 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - III Material 26 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 Kilogram/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing andincluding preparation of sub-grade surface if required etc. complete 27 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. 28 Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete 29 Providing and fixing Ductile iron ManHole Covers / Strom Water Grating and Gratingwith frame of Various sizes,weight and types and load bearing capacity as per EN-124,equivalent NECOwith prior approval of concerned Superitending Engineer. 30 Providing and fabricating structural steel work in rolled sections like joists, channels,angles, tees etc. as per detailed design and drawings or as directed includingcutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including on ecoat ofanticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete. 31 Providing and fixing in position Guard Railing asper Drg.No. 15 Type C dt. 20-4-79, with 3 rows of 50mm dia.G.I. pipe 30cm apart and fixed in M.S. channel so fsection125 x65x6mm spaced 2.5C/c1:2:4c.c. bedding of size 45x30cm. asper detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. 32 ROYALTY 33 TESTING CHARGES 34 ADD 18% G.S.T. (S.G.S.T. 9% + C.G.S.T. 9%) 35 ADD (1 % Insurance)
