Construction Of Saraswati Udyan , Sudarshan Colony , Survey No 52 At Dhule- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical 2 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter(asperIRC861983) embedded125mmbelowgroundleveloverM-10PCC finishedneatlywithC.M.1:2,settingthesameinC.M.1:2, includingtherequired excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant MORTH 408 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd. E. 1 Page No. 287 [WITHOUT/NON SCADA] 4 Providing and laying in situ /Ready Mixcement concreteM-20 of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water,Steel centeringformwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.3 Page No. 298 and B.7, Page No.38 [WITHOUT/NON SCADA] 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.5 Page No. 300 and B.7, Page.No. 38 [WITHOUT/NON 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.6 Page No. 300 and B.7, Page No.38 7 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing rcc pardi 9 Providinguncoursedrubblemasonryoftrap/granite/quartzite/gneissstonesincement mortar1:6infoundationandplinthofinnerwalls/inplinthofexternalwallsincluding bailing out water manually , striking joints on un exposed faces and watering etc.complete. 10 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineerincharge inlayersof15cm to 20cm includingwateringandcompactionetc. complete. Bd.A.11 Page Number 263 11 Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthic including hand packing and compacting etc. complete. 12 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No. 315 14 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 15 Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplastered surfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary. As directed by Engineer in charge. 16 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing andcleaningetc. complete. Bd. M.22 B/Page No. 390 17 ProvidingandfixingheavydutyinterlockingconcreteColoured pavingblocksof 60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality and shapeon abedof crushedsandof25to30mmthickincludingskirtingjointsand cleaning etc. complete. As directed by Engineer in charge 18 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm withironbarsat150mmC/Canddiagonalflats asperthedetaileddrawingincluding hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. Bd.W.6 Page One 19 Providingandfabricatingstructuralsteelworkinrolledsections likejoists,channels, angles,tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted 20 Providingandapplyingprimingcoatovernew/oldsteel andothermetalsurfaces includingpreparingthesurfaceby thoroughlycleaningoil,grease,dirtandother foreign matterand scouredwithwirebrushes,finesteelwool, scrappersandsand paper,scaffoldingetc. complete. As directed by En- gineer in charge. 21 Providingandapplyingtwocoatsoflead/zincbaseoilpaint/ bituminiouspaintof approved colourtonewstructuralsteelwork andironworkinbuildingsincluding scaffolding ifnecessary, cleaningandpreparingthesurfaceetc. complete.(excluding 22 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm)thickmildsteelsheetpaintedwithonecoatof Zincchromatestovingprimerandtwocoatsof enamelpainton frontside andgreystove enamelonbackside andborder/ messages/symbolsetc.with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted 23 Providingandfixing90cmx60cm Graniteplateengraving10 cm.heightletter,figures including painting the lefters/figures with approved colour and shade complete. Bd.W.7 Page Number 586 24 GARDEN SOIL: -Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, 25 Supplying on site well decomposed Farm Yard Manure (i. e. 1 part FYM) for excavation area of depth of 30 cms ( consolidated thickness). Quantity of FYM 0.081 cum x 975/cum = 78.97/- 26 Providing on site required variety of lawn etc comp 27 Excavation for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed in earth, soil of all types, soft murum, including removing the excavated material up to a distance of 50 mtrs. for a depth of 30 28 Filling fresh garden soil / silt & manure in excavated area of depth 30cms. (1/10 of unskilled labour) 29 Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species, lawn grass as directed etc. complete for required depth 5 to 30 cms. for planting lawn/ shrub/ flower bed/ hedges/ edges/ canna bed/ ground cover. (1/10 of semiskilled labour) 30 Maintenance of Newly Developed lawn Area. For First 30 days Only (Paspalum/ selection) 31 Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Murraya(Kamini);Bag Size 7 x 8,(plants list) 1(a) serial no 15. 32 Maintenance of Newly Developed Shrubbery/ Hedges/ Edges/ Ground covers Area. For First 30 days Only 33 Supplying on site fresh Garden soil (i. e. 3-part soil) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness). Quantity of soil 0.141 cum x 770/cum = 108.57/- 34 Supplying on site well decomposed Farmyard Manure FYM (i. e. 1- part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness). Quantity of FYM 0.044 cum x 975/cum = 35 Providing on site required variety of Tree (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Palm-Bismarkia;Bag Size 15 x16, ht 5- 7 Specification:- Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,un 36 Providing on site required variety of Tree (free from weeds /diesease etc.) 30 cms. apart c/c.Name:- Palm-Green wichimeri;Bag Size 18 x18, ht 5-6 Specification:- Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,undamaged. 37 Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/ large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. 38 Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m (1/10 of unskilled labour) 39 Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m. (1/10 of semiskilled labour) 40 Maintainance of Newly planted tree varities having height 1 mtr.- 2 mtr. For First 30 days Only 41 ADD FOR GST 18% 42 ADD LABOUR INSURANCE 1% 43 ADD ROYALTY CHARGES 44 ADD LABOUR INSURANCE 45 ELETRIFICATION
