}

Tender For List Of Works Related To Fabrication Erection - Dismantling, Fabrication And Erection Of Old/New Pipe Lines Upto Size 12. Dismantling, Fabrication And Erection Of Tee Upto Size 12. Dismantling, Fabrication And Erection Of Nipples Upto Size 12, ghosi-Uttar Pradesh

Kisan Sahkari Chini Mills Ltd has published Tender For List Of Works Related To Fabrication Erection - Dismantling, Fabrication And Erection Of Old/New Pipe Lines Upto Size 12. Dismantling, Fabrication And Erection Of Tee Upto Size 12. Dismantling, Fabrication And Erection Of Nipples Upto Size 12. Submission Date for this Tender is 04-06-2025. Dismantling Work Tenders in ghosi Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49426418
Tender For List Of Works Related To Fabrication Erection - Dismantling, Fabrication And Erection Of Old/New Pipe Lines Upto Size 12. Dismantling, Fabrication And Erection Of Tee Upto Size 12. Dismantling, Fabrication And Erection Of Nipples Upto Size 12
Tender
Indian
Uttar Pradesh
Ghosi
04-06-2025

Tender Details

Tender For List Of Works Related To Fabrication Erection - Dismantling, fabrication and erection of old/new pipe lines upto size 12.Dismantling, fabrication and erection of Tee upto size 12.Dismantling, fabrication and erection of Nipples upto size 12.Dismantling, fabrication and erection of Casing upto size 12.Dismantling, fabrication and erection of Bend upto size 10.Dismantling, fabrication and erection of Flange upto size 12.Dismantling, fabrication and erection of Reducer upto size 12.Dismantling, fabrication and erection of Blind upto size 12.Dismantling, fabrication and erection of Tee above size 12. Dismantling, fabrication and erection of nipple above 12 size.Dismantling, fabrication and erection of flange above 12 sizePageDismantling, fabrication and erection of reducer above 12 size.Dismantling, fabrication and erection of blind above 12 size.Dismantling and erection of valve upto 10 size.Dismantling and erection of valve above 10 size.Dismantling, fabrication and erection of coil of MS pipe of various sizes.Dismantling, fabrication and erection of tanks of rectangular/round/square etc. shapes. Dismantling of heavy structure. (above 02 ton)Fabrication and erection of heavy structure.Dismantling of light structure.Fabrication and erection of light structure.Doing dad facing on the teeth of under feed roller of mill.Making and installing new scanter in place of worn/cut scamper of under feed roller of mill.Cutting and removing the worn teeth of under feed roller and fabricating and installing teeth as per drawing and doing dad facing.Making worn juice ring of side rollers of mill with new 6/8 mm thick plate as per sample.Replacing both the pipes of worn out well conveyor of mill properly and fitting them in the fitted trough and giving trial.Cut the worn out runners of Cane Carrier, Rack Carrier, Bagasse Elevator and Bagasse Carrier and put them in the scrap yard and make a new runner from 50/65 mm flat, install it and give a trial.Cut the worn out/worn out side plates of Cane Carrier and put them in the scrap yard and fit it with new 6/8 mm thick MS plate.Cut out the discharge suit fitted below the fiberizer and put it in the scrap yard and make it with 12 mm plate and give a satisfactory trial.Replace the worn out bottom trough and side plates of Rack Carrier with 08 mm plate.Cut out the juice tray fitted on the mill downs and make it with 6/8 mm plate as per drawing/sample and give a leak proof trial. Repairing DD SM screen as per sample:-(a) Cutting out the weak part of the receiving box fitted above the skin and replacing it with a new one made of 8/10 mm plate with nipple as per sample.(b) Cutting out the juice box fitted below the skin and making it as per sample and installing it.(c) Setting it from the skin Cutting and removing boot (covered pony) of carrier and making a new one from 10/12 mm plates as per the old one and giving trial.Cutting and removing the grooved hood of cane leveler/chopper and making and installing it from 10/12 mm thick plate.Cutting and removing the grooved bay of mill rack carrier and making and installing a new box from new plate/angle in its place.Replacing the square bar of seed and trolley fitted on cane unloader which is in damaged condition with new square bar.Cutting and removing the groove plates of Donali suit in mill downs and making and installing it again from new/old plate and giving trial.Repairing old damaged racks of rack carrier by straightening them as per sample/instructions and strengthening.Cleaning and painting inside and outside of boiler chimney.Cleaning and whitewashing the condensate receiving tank of boiler.Dismantling, fabrication and erection work of delivery line of bagasilo fan.Cutting and removing the plate on the top of the boiler and replacing it with a new one.Cutting and patching the corroded side and bottom plates of bagasse elevator, RBC.Cutting and removing the side plates of boiler no. 1, 2 and 3 and replacing the corroded plates and making and installing new 5/3 mm plates as per the sample as per the requirement.Cutting and removing the corroded plates of the expansion joint of the air dehydrator/economizer of boiler no. 1, 2 and 3 and making and installing a new joint as per the sample and giving trial.Making and installing expansion bellows at various places in the side plates of boiler no. 3 as per the instructions.Cutting and removing the corroded air suture of boiler no. 1 and 2 and making and installing a new suture from a new plate and giving trial.Replacing the damaged ribs of juice dehydrator/vapor line juice dehydrator Dismantling, fabrication and erection of the unit.Fixing hydraulic test by installing a blind in the pipe above the vapour line juice deaerator and removing the blind after testing and connecting the pipe as before.Dismantling of bass tubes of juice deaerator Dismantling of boom tubes of evaporatorFitting of boom tubes of evaporatorHydraulic testing of evaporator bodies (upto 100 PSI)Fabrication of platforms from old scraps at specified locations in factory. Dismantling of S.S. PipelineErection of S.S. PipelineDismantling, Fabrication and Erection of S.S. PipelineNipple Dismantling, Fabrication and Erection of S.S. PipelineFlange Dismantling, Fabrication and Erection of S.S. PipelineMelter of Sulphur Furnace of Juice/Syrup, by making it from 6/8 mm MS Plate and bending it from 2 Pipe/Tube of Super Deeter and fitting it. Removing the Melter and installing it in its place (with all connections) and giving trial.Cutting and removing the corroded plate of Saveall (Quad Body) and making and installing it with new plates and giving trial.Cutting and removing the corroded Quad/Juice Deeter Condensate Bottle/Clear Juice/Syrup Bottle and making and installing a new one of same size with 8/10 mm plate and making and installing it. Making all connections and giving trial.Cut out the mud trough from the neck of the vacuum filter and make a new one from 8/10 mm plate and install it. After making all the connections, give it a trial run.Cut out the trough agitator from the neck of the vacuum filter and make a new one from the material (angle and plate) provided of the same size and install it.Clean both the service water tanks and whitewash all their walls with lime. Clean the grass and weeds around the service tank up to a distance of about one meter.Dismantling the ammonia coils of the juice heaters and make a new one as per the sample and install it.Dismantling the ammonia coils of the evaporator bodies and make a new one as per the sample and install it. Work of replacing cutover valve of pans.ageCutting out the weak gall of quad/pan bodies as per instructions and replacing it with 12mm plate fabricated accordingly and giving successful trial.Dismantling, fabrication and erection of exhaust pipe from 12 to 24 size in steam exhaust pipe/vapor pipe under pans.Dismantling, fabrication and erection of exhaust pipe up to 20 size in steam exhaust pipe/vapor pipe under pans.Dismantling, fabrication and erection of bend from 12 to 20.Dismantling, fabrication and erection of pipe from 20 to 24 in steam exhaust pipe/vapor pipe under pans. Dismantling of weak feed dieder of 40/60 ton capacity pan as per instructions, fabricating it of the same size and installing it along with all its nipples and valves.Strengthening of the body of pans by making a ring from 8/10 mm thick MS angle 10/12 mm thick plate from inside on the gas in two lines as per instructions.Dismantling, fabrication and erection of complete damper and giving successful trial.Making and installing the broken mangoes of crystallizer and giving trial.Cutting the incentric bend of the suck pipe of injection and spray pumps and making and installing it accordingly.Making bed for pump and motor. Dismantling, fabrication and erection of gutters for bringing mastic from crystallizers to pug mills.Dismantling, fabrication and erection of mastic/magma/molasses gutters.Opening and cleaning all the jaw boxes, PVC pipes, nozzles, bends of spray pond. Repairing or replacing the nozzles, bends and clusters with new ones as required. Trial of the whole by water flooring.Fitting of butterfly valve as per instructions. Size 8Fitting of butterfly valve as per instructions. Size 10

Key Value

Document Fees
INR 300 /-
EMD
INR 20000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail