Tender For Miscellaneous Civil Works At Erectors Hostel, Kstps, Kota. Miscellaneous Civil Works At Erectors Hostel, Kstps, Kota. - Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area 3 square meter and below. Of area 3 square meter and below. Of area exceeding 3 square meter Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish: 12mm thick 20 mm thk Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: For thickness of tiles 10mm to 25mm Fine dressed & machine cut edges 30-35 mm thick sand stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. Mandana stone Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Upto 15 cm. thick. P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1:4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to code IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Providing and fixing, Granite stone slab mirror polished andmachine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white cement 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Good quality South Black: Up to 1500 Cm2 Tiles Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in. layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. Half brick masonry in Superstructure, above plinth level upto floor V level using bricks of designation 75: Cement mortar 1: 4 (1 cement: 4 coarse sand) Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement: 3 coarse sand) jointing with white cement mortar 1:2 (1white cement: 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete: 1501 Cm2 to 3600 Cm2 Tiles For Mirror polishing on marble work where ever required to give high gloss finish complete. Providing and Fixing Aluminium composite panel of approved make 3mm thick with 0.5mm thick skin & PVDF coated approved shade for wall panelling. Main framing work to be done using 50mmx25mmx1.6mm tubular section of approved make. Stainless steel screw to be used to fix the ACP panel to be fixed to the main frame with industrial adhesive tape and panel groove to be sealed with weather proof silicon sealant suitable for glass/aluminium etc. complete in all respect as approved by Engineer in-charge. Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap. at junctions, attop ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth,rust free, straight,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc., all complete as per architectural drawings and the directions of Engineer in charge (Glazing and paneling to be paid for separately). For fixed portion: Powder coating aluminum ( minimum thickness of powder coating 50 micron) For shutters builtup standard tubular sections of openable doors windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron) Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 13.50 kg/sqm) CARRIAGE OF MATERIALS: Building Rubbish Stone metal (Grit and ballast etc.) for 1 km Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap P & F White Vitreous China Double Syphonic European W.C. (L.S:2556Mark) with mounted W.V.C. flushing cistern of (IS: 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. P & F European type white glazed vitreous china 1st quality W.C. (IS 2556 Mark) including cutting and making good the wall and floor: Wall Mounting (extended) P & F Low level Flushing Cistern of 10 litres capacity (IS: 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: WVC for symphonic EWC. P & F water closet Seat Covers with brass hinges complete: Solid PVC (IS 2548 marked) grade-I white for EWC. P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall: Size 580 mm x 450 mm P & F 1st quality WVC pedestal for wash basin. Providing & fixing Waste Coupling with fittings of approved quality/make. C.P. Brass 32mm dia. Providing and fixing Waste Pipe with all fittings. P.V.C. with CP nut 32mm. P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick P & f of Towel rail or Ring of approved quality /make. C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). Providing & Fixing Grating of approved quality/make: Stainless steel sheet size 125mm dia. Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer Incharge Health focet (Premium heavy Quality) as approved by Engineer-in-Charge P & F G.I. pipes (Internal Work) with G.L. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: Exposed on wall a. 15mm dia nominal bore B Class b. 25mm dia nominal bore B Class Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778: 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good. the walls etc.,) 20mm nominal size P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make: a. C.P. Pillar cock, 15mm dia nominal bore. P&F Bib Cock (IS:8931 Mark) superior quality of approved make :- Long body, 15mm nominal bore weight not less than 690 gm P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. a. C.P. Inlet connection 15 mm Brass (IS:8931 marked). P & F 15 mm. dia. connection pipe of approved quality/make: PVC pipe with C.P. Brass nuts up to length 450 mm. P & F Full-way valve (IS:778 Mark) or wheel valve of approved make: a. Gun-metal 20 mm nominal bore. Providing and fixing rigid PVC Pipe (IS: 4985 mark) Class II (4 Kg./cm2) approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant for 110 mm dia. P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality make including joining the pipe with solvent cement rubber ring and lubricant: Bend (a) 110 mm Plain Tee 110 mm Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Jet Spray (Premium heavy Quality) as approved by Engineer in-Charge P & F Bath Shower of approved quality/make C.P. brass of Heavy & superior quality 150mm. P & F Stop Cock (IS: 8931 Mark), superior & of quality approved make Concealed Stop Cock 15mm. P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality: Soap Dish 380mm.
