Tender For Fabrication, Erection And Dismantling Work From Reputed Contractors - Dismantling Of Pipes Of 2 Cm To 35 Cm Diameter. Erection Of Pipes Of 2 Cm To 35 Cm Diameter. Dismantling And Fabrication Of Pipe Fittings Of 2 Cm To 35 Cm Diameter. Flange Ni, hasanpur-Uttar Pradesh

Tender For Fabrication, Erection and dismantling work from reputed Contractors - Dismantling of pipes of 2 cm to 35 cm diameter.Erection of pipes of 2 cm to 35 cm diameter.Dismantling and fabrication of pipe fittings of 2 cm to 35 cm diameter.FlangeNippleCross / TeeVolvePagReducerDismantling of MS pipe of 400 mm size and above diameter and dumping it in scrap yard.Fabrication of MS pipe of 400 mm size and above diameter with 6/8/10 mm size plate and erection at the specified location. Dismantling, fabrication and direction of pipe fittings of diameter 400 mma and above.ReducerNippleCos/TPDismantling of old bands of motor pumps and reduction gears. Fabrication, direction and alignment of new bands. 10 HP to 25 HP30 HP to 85 HP70 HP to 150 HPMore than 150 HPPatching work of various types of rectangular, square and circular old equipments by providing new old plates.Dismantling of old and worn out rectangular / circular tanks and putting them in scrap yard.Construction of new rectangular circular tanks by providing new old plates.Flat bottomConical bottomProviding new / old plates for repair and replacement of old parts of rectangular / circular tanks.Dismantling of light structures and taking them to scrap yard.Fabrication and erection of light structures.Dismantling of heavy structures and taking them to scrap yard.Fabrication and erection of heavy structures.Replacing old worn out platforms with new or old plates and casting the scrap in the scrap yard.Construction and fitting of sidings from old GI sheets for DB motors etc. at various places.Repairing of mill house, boiling house etc. by welding or fitting of worn out nuts and bolts. Dismantling, fabrication and fitting of header along with flange and nipple etc. and casting it in the scrap yard.2.5 cm to 12.5 cm15. cm to 30 cmReplacing cones of various equipment with old/new MS plates and dumping the scrap in the scrap yard.Upto 1 meter diameterAbove 1 meter diameterRepairing MS gutters at various locations.Fabrication and erection of new gutters in place of worn and corroded gutters with old or new plates.Repairing worn and corroded columns and beams in the mill.Dismantling of worn and corroded coils and fabrication and erection of new coils with new pipes. Fabrication of 27 long electric poles with support using 4.6,8 old & new pipes and also installation of cross arms.Fabrication & erection of man holes with sight glass, blinds in various equipments and steam lines.Fabrication & erection of step type stairs with railing etc. for various places.Fabrication & erection of worn out runners of Mill HouseCan Carrier / SRC / Rake Carrier / BagasseElevator! RBC.Repairing of old rakes of SRC / Inter Rake Carrier.Fabrication of new rakes for SRC / Inter Rake Carrier using MS plates and dumping of scrap in scrap yard.Replacing worn out side plates of Rake Carrier / Bagasse Elevator / RBC upto 300 mm height using new / old plates. Change.

INR 590 /-

Refer document