tender for Construction Work From The Remaining Amount Sanctioned For The Second Floor Of Uttarakhand Dharmshala - 1 Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer. Dismantling Brick / Tile workIn cement mortar 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). 3 Centring and shuttering with plywood or steel sheet upto two stories (eachstoryofheightupto3.5metrefromfloorlevel)including strutting, propping etc. and removal of form for : Arches, domes, vaults upto 6 m span 4 Centring and shuttering with plywood or steel sheet upto two stories (eachstoryofheightupto3.5metrefromfloorlevel)including strutting, propping etc. and removal of form for : Arches, domes, vaults upto 6 m spanExtra for arches, domes, vaults exceeding 6 m span 5 Add extra for doing centering and shutteriing work for each subsequent storey above two storey. 6 M-25 Grade Concrete (1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) -As per design mix) 7 Addextraforlayingreinforced cementconcreteabovetwostories (or 7.50 mtr height above plinth level) for every one storey or 3.00 m height or part thereof. 8 Reinforcement for R.C.C.workat all levelsincluding straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. 9 Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) 10 Extra for brick work in superstructure above two stories for each two stories or part thereof by mechanical means by lifting material using mobile crane . 11 Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix:includingProviding/mixingofsyntheticfiberscompulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 1:4 (1 cement : 4 fine/ coarse sand) 12 Extraforplasteringexteriorwallsofheightmorethan10mfrom ground level for every additional height of 3 m or part thereof. 13 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 14 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including priming coat with cement primer. 15 Providing and fixing fine dressed sand stone/approved stone Traditional work as per existing matching geometrical design includingmouldingworkwithfinefinishing, fixingwiththambliby properadhesiveandwhitecementwithpigmentincludingmaking groove etc. complete in all respect. 16 Structural steelworkriveted, boltedorweldedinbuiltup sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 17 ProvidingandfixingGIwiregaugeofaveragewidthofaperture 1.56mm with wire of 0.45mm to existing steel door, window shutter frameswithnecessaryM.S.stripbeading20x3mmwithsuitable screw at not exceeding 150mm distance etc. complete. 18 Supply and fixing 2mm thick UV stablised fiberglass reinforced plastic sheet for roofing 19 Providing and fixing aluminium work for doors, windows, ventilators andpartitionswithextrudedbuiltupstandardtubularsections/ appropriate Z sections and other sections of approved make conformingtoIS:733andIS:1285,fixedwithrawlplugsand screws or with fixing clips, or with expansion hold fasteners including necessaryfillingupofgapsatjunctions,attop,bottomandsides withrequiredPVC/neoprenefeltetc.Aluminiumsectionsshallbe smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P.brass / stainless steel screws, all complete as per architecturaldrawingsandthedirectionsofEngineer-in-charge. (Glazing andpanelling to be paid for separately) : For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron) 20 Providing and fixing aluminium work for doors, windows, ventilators andpartitionswithextrudedbuiltupstandardtubularsections/ appropriate Z sections and other sections of approved make conformingtoIS:733andIS:1285,fixedwithrawlplugsand screws or with fixing clips, or with expansion hold fasteners including necessaryfillingupofgapsatjunctions,attop,bottomandsides withrequiredPVC/neoprenefeltetc.Aluminiumsectionsshallbe smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P.brass / stainless steel screws, all complete as per architecturaldrawingsandthedirectionsofEngineer-in-charge. (Glazing andpanelling to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixinghinges/pivotsandmakingprovisionforfixingoffittings whereverrequiredincludingthecostofPVC/neoprenegasket required(Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron) 21 Providingandfixingglazinginaluminiumdoor,window,ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge.(Costofaluminiumsnapbeadingshallbepaidinbasic item) :With 2mm APP 22 Providingandfixingglazinginaluminiumdoor,window,ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge.(Costofaluminiumsnapbeadingshallbepaidinbasic item) :With floatglass panes of 5.50 mm thickness 23 Providingandfixing12mmthickPre-laminatedparticleboardflat pressed three layer or graded wood particle board conforming to IS: 12823GradelTypell,inpanellingfixedinaluminiumdoors, windowsshuttersandpartitionframeswithC.P.brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminatedparticleboardwithdecorativelaminationonboth sides.
