Supply Of Automatic Change Over Control And Distribution Panels
2
Supply of automatic Change Over Control and Distribution panels for CLS as per Latest RDSOSpecificationNo.TI/SPC/PSI/CLS/0020 with A&C Slip 1 to 4. CORE approved drawing no.:ASCOS/CORE/2005/01 Rev.02 or latest.The interior of CLS panel shall be adequately lighted by 60 Watt, 240 V AC lamp with a door operated switch. The wiring shall be capable to ON/OFF the lamp through door operated switch if any one power supply is available on the panel. The supporting frame and panel shall be properly treated and then under coated suitably to serve as base and binder for the finishing coat applied. The exterior & interior surface and the supporting frame of the panel shall be epoxy powder coated of VELLUM colour in a shade No. 365 of IS:5. If any painting surface gets damaged during transit, the surface finish shall be restored at siteafter erection. (1) 150 Amp. Capacity 240 volts, 3 Supply, 50 Hz. for 25 KVA AT(Make: ISI Approved) [ Warranty Period: 30 Months after the date of delivery ][Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]SSE/ELEC/RPAN, NFR Assam 1.00 Numbers
3
Supply of automatic Change Over Control and Distribution panels for CLS as per Latest RDSOSpecification No.TI/SPC/PSI/CLS/0020 with A&C Slip 1 to 4.CORE approved drawing no.:ASCOS/CORE/2005/01Rev.02 or latest.The interior of CLS panel shall be adequately lighted by 60 Watt, 240 V AC lamp with a door operated switch. The wiring shall be capable to ON/OFF the lamp through door operated switch if any one power supply is available on the panel. The supporting frame and panel shall be properly treated and then under coated suitably to serve as base and binder for the finishing coat applied. The exterior & interior surface and the supporting frame of the panel shall be epoxy powder coated of VELLUM colour in a shade No. 365 of IS:5. If any painting surface gets damaged during transit, the surface finish shall be restored at site after erection.(2) 60 Amp. Capacity 240 volts, 3 Supply, 50 Hz. for 10 KVA AT(Make: ISI Approved) [ Warranty Period: 30 Months after the date of delivery ][Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]SSE/ELEC/RPAN, NFR Assam 1.00 NumbersSSE/ELECT/BG/NBQ, NFR Assam 2.00 Numbers
4
Supply of automatic Change Over Control and Distribution panels for CLS as per Latest RDSOSpecification No.TI/SPC/PSI/CLS/0020 with A&C Slip 1 to 4.CORE approved drawingno.:ASCOS/CORE/2005/01Rev.02 or latest. The interior of CLS panel shall be adequately lighted by 60 Watt, 240 V AC lamp with a door operated switch. The wiring shall be capable to ON/OFF the lamp through door operated switch if any one power supply is available on the panel. The supporting frame and panel shall be properly treated and then under coated suitably to serve as base and binder for the finishing coat applied. The exterior & interior surface and the supporting frame of the panel shall be epoxy powder coated of VELLUM colour in a shade No. 365 of IS:5. If any painting surface gets damaged during transit, the surface finish shall be restored at siteafter erection.(3) 30 Amp. Capacity 240 volts, 3 Supply, 50 Hz. for 5 KVA AT(Make: ISI Approved) [ Warranty Period: 30 Months after the date of delivery ][Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]SSE/ELECT/BG/NBQ, NFR Assam 1.00 Numbers
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
