Supply Of Fire Hydrantvalves, Air Release Valves And Ball Valves Required For Fire Fightingsystem , Fire Hydrant Valve,Valve Type:Female Oblique Type With Angled Outlet,Flange Drilling Dimension:O.D 190.5Mm,P.C.D:152.4 Mm,4 Holes,Dia 19Mm,Inlet:80Mm Nb,Outlet: 63Mm Female Instantaneous Cpupling With Spring Lock Type Lug,Confirming To Is 5290:2018 Standarads, ,Bonnet Type:Screwed Type 3 Inch Bsp.Moc:Body,Female Inst.Outlet:Ss 304 Conf.To Is:3444Gr.I,Outlet Washer:Rubber Is:937,Blank Cap :Abs Plastic,Spring:Ss Is:6528,Cam Tooth,Glant Nut,Gland Bush And Bonnet:Ss 304 Is:3444 Gr.I,Spindle:Ss 304 Is 6603,Hand Wheel : Ci Is:210,Washer And Hex Nut :Ms(Galvanized),Check Nut,Seat Valve:Ss 304 Is:3444 Gr.I,Seat Washer :Rubber Is:937,Nut:Ss,Chain:Gi,Gland Packing:Asbestos Is:4687.Hydraulic Test Prussure:1)Body:21 Bar For 2.5 Minutes2)Seat:14 Bar.Flow Test:At 7 Bar 900 Lpm Min.Painting: Valve Shall Be Painted With 2 Coats Of Fire Red Shade No.536 Of Is :5 Over Two Coats Of Red Oxide Primer.The Paint Shall Confirm To Is:2932,Hand Wheel Shall Be Painted Black.,Air Release Valve Of Size 25Mm(Mbsp Thread Inlet),Type:Single Ball Acting,Hydraulic Test Pressure:21 Kg/Cm2 Used For Fire Fighting System,Body,Air Vent Body,Top Confirm To Gm Is 318 Ltb-Ii,Ball Valve Of Size 15 Nb,Valve Type:Manually Operated Ball Valve Full Bore 3 Piece,Calss :150,Water Application.Conforming To Bs 5351 Standards,Testing Bs En 12266-1,End Connections :Screwed Ends To Bsp (F),Ball Valve Of Size 25 Nb,Valve Type:Manually Operated Ball Valve Full Bore 3 Piece,Calss :150,Water Application.Conforming To Bs 5351 Standards,Testing Bs En 12266-1,End Connections :Screwed Ends To Bsp (F)
