|
| 1 | Surface dressing of ground including removing vegetation and equalities not exceeding 15cm deep and disposal of rubbish lead upto 50m and lift upto 1.5m all kinds of soil SI 259 |
| 2 | Eartwaork in surface excavation not exceeding 30cm un depth but exceeding 1.5 in width as well as 10sqm on plan including getting out and disposal of excavated earthupto 50m and lift 1.5m directed by engineer in charge 2.1.1 all kinds of soil. |
| 3 | Excavated supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm trenches, plinth sides of foundation etc complete. |
| 4 | Providing and laying of c.c. in 1:6:12 with c/s and 40mm thick b/ballast foundation of floor all labour material and t&p etc. |
| 5 | R.C.C. work in column 1:1.5:3 with cement coarse sand 20mm gauge stone grit all complete. |
| 6 | M150 brick work in 1:6 c/s morter in sub structure all labour & t&p etc. |
| 7 | 12mm thick intarnal plaster in 1:4 with morter in wall all material, labour & t&p etc. |
| 8 | M.S. iron work in plain work such As R.C.C. work all complete. |
| 9 | Provinding & laying steel bars including cutting binding placing and complete in all respects. |
| 10 | Mild Steel or iron work in heavy size such as truss, build up gates record racks, roof, work gates etc wrought to required from including drilling holes riverting or wekding where necessary airing and their fixing required for proper completion of the work. |
| 11 | Mild Steel or iron work in heavy size and section such as holding down bolts, hold fast, tie rods, grating etc (rates) wrought to required shape as necessary for bending etc supply of steel and its wastage including cost of bolts nuts if required welding, grinding and making holes as requried for completetion of work |
| 12 | Providing and corrugated G.S. sheet roofing including vertical/curved surface fixed with poly mer coated jor L hooks, bolts, and nuts 8mm dia with bitumen and G.I. limpet washer or with G.I. limpet washer filled with white kead, incuding a coat of approved steel primer and two coats of approved pants on overlaping of sheets complete (up to any pitch in horizontal/vertical or curved surface ) excluding the cost of purlins, raftrsand truss and incuding cutting to size and shape wherever required 0.63mm thick with zinc coated not less than 275gm/sqm |
| 13 | Provinding & laying rectified glazed ceramic floor tiles pf size 300*300mm or more (thickness to be specified by the manufactured) of 1st quality conforming to is 15622 of approved makec in colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 jointing with slurry white cement and matching pigment etc complete |
| 14 | Provinding & laying rectified glazed ceramic floor tiles pf size 300*300mm or more (thickness to be specified by the manufactured) of 1st quality conforming to is 15622 of approved make in colours white, ivory, grey, fume red brown laid on 20mm thick cem |
| 15 | Dismentling with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over and including a priming og approved brand and manufacture such as berger j&n shailimar, asian paints after throughly brushing the surface free from morter dropping and other foreing matter and also including prepairing the surface even with plaster of paris or approved synthic material and sand papered smooth including cost of all material. |
| 16 | Painting of wood or iron work including sand preparing rubbing and cleaning as reqired for proper completion of work. |
| 17 | Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved supperior quality ready mixed paint of clear synthetic varnish including supply of all material, labour and t&p etc required for proper completion of the work paint to be used should confirm to the isi 103 |
| 18 | Provvind and applying putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 19 | Supply and fixing 32mm thick flush door complete fitting |
| 20 | Supply and fixing aluminium flush door all complete fitting bathroom and latrin 32mm thick flush door all complete fitiing |
| 21 | Supply and fixing 32mm thick flush door ply wood with handle fiting all complete |
| 22 | Wiring point for light with 1.5sq.mm pvc insulate single core aluminium conductor cable in heavy guage rigid steel condult pipe on surface complete with 8swg gi earth cintinuty wire piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated back elite sheet etc complete in all respected as |
| 23 | Wiringpont for fan/fresh air fan (lightduty exhaustfan) with 1.5 sq.mm PVC insulated single core aluminium conductor cable in heavy guage rigidsteel conduit pipe on surface, complete with 8 SWG GI earth continuity wire and piano type switch & ceillingrose on 3mm thick phenolic laminated backelite sheet etc, complete in all, as directed |
| 24 | Wiring point for plug with 1.5sq mm PVC insulated single core aluminium conductor cable in heavy guage rigidsteel conduit pipe on surface, complete with 8 SWG GI earth continuity wire and piano type switch & socket etc complete in all respect |
| 25 | S/F of 18w hewells make all fitting complete MR |
| 26 | S/F of LED 12w hewells make all fitting complete MR |
| 27 | Septic tank of appropriate capacity for 2 years cleaing interval for 50 users |
| 28 | S/F of low density polythene seamless one piece moulded tank and placing the same in proper position including all |
| 29 | Providing and fixing GI/PVC all fitting |
| 30 | Providing and fixing sanitary pipe all fitiing |
| 31 | Providing and fixing WC pan median type with cast iron P and S trap all complete with automatic flusing |
| 32 | Supply and sixing 25mm PVC pipe in position all complete |
| 33 | Supply and fixing 25mm PVC pipe in positon all complete |
| 34 | Supply and fixing 30mm dia socket |
| 35 | 200 mm dia drilling and 350 mm dia running from ground levvel to 50 m below ground level in alluvial soil up to sand strata |
| 36 | Supply and lowering of 150 mm dia PVC plain casing pipe |
| 37 | Supply and fixing of 150 mm dia End Cap |
| 38 | Supply and fixing of 150 mm dia Top Cap |
| 39 | Supply and fixing of 150 mm dia Centerlizer |
| 40 | P/F 500x400mm hand wash basin of ehite glazed erthen ware ISI marked (hindustan neyer cera make) i/c supply of all materials labour and t&p comp. |
| 41 | P/F flat back 465mm x 355mm x 265mm size lipped from unial vasin of white glazed erther were first quality (Hindustan Nycer Make) S.I. Mark S I No 304 |
| 42 | P/F polyvinyl choride (CPVC) pipe 20mm dia |
| 43 | P/F polyvinyl choride (CPVC) pipe 15mm dia |
| 44 | P/F bib brass bib cock 400 gms i/c all |
| 45 | Making water connection of GI pipe line with GI main as in SI 210 |
| 46 | PVC low level cisterns 10 ltr capasity with all internal fittins of PVC etc. |
| 47 | Handpupm with submerciable |
| 48 | Sign Board |
