Tender For Supply And Installation Of Workshop Tools, Mumbai-Maharashtra

TDR : 46970637

Tender Notice
Corrigendum Details
BOQ

Expired

Mumbai , Maharashtra

Tender Brief : Corrigendum : Tender For Supply And Installation Of Workshop Tools

Document Fees
₹ 25000 /-

EMD
₹ 238700.0 /-

Tender Value
Refer document

Submission Date
27-01-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	17-01-2025	Corrigendum for Supply and Installation of Workshop Tools at Consignee Locations	Date	27-01-2025
2	17-01-2025	Corrigendum for Supply and Installation of Workshop Tools at Consignee Locations	Technical Bid	27-01-2025
3	09-01-2025	Corrigendum for Date Extension (TE-24005/2024-25 )	Date	22-01-2025
4	09-01-2025	Corrigendum for Terms and Conditions (24005/2024-25)	Technical Bid	22-01-2025

Name of Work: Supply and Installation ofWorkshop Tools at Consignee Locations

Sl. No.	Item Description
1	Carpenter Marking Gauge
2	Carpenter Mortise Gauge
3	Carpenter Square - 200 mm
4	Chisel - Bevel Edge, Set of 8 with Handle
5	Hand Drill Machine - 6 mm
6	Plane - Adjustable, 250 mm
7	Plane - Jack - 250 mm X 50 mm Blade
8	Plane - Jack - 450 mm X 60 mm Blade
9	Round Crow Bar - with Chisel and Claw End, Length = 1500 mm, Diameter = 30 mm
10	Router Plane - 12mm
11	Sheet Cutter - Sun mica/ Lamination Sheet Cutter
12	Spoke Shaves - Flat Sole, Adjustable, 250 mm
13	Spoke Shaves - Round Sole, Adjustable, 250 mm
14	Trammel Points - with Beam 600 mm
15	Wood Carving Tool Set - Set of 12 Pieces
16	Wooden Straight Edge - 4 Feet
17	Chisel - Flat, 21 mm X 150 mm
18	Chisel - Bolster, 100 mm X 200 mm
19	Chisel - Cold, 16 mm X 150 mm
20	Chisel - Cold, 20 mm X 150 mm
21	Chisel - Cold, 25 mm X 200 mm
22	Chisel - Cold, 30 mm X 300 mm
23	Chisel - Cold, 9 mm X 125 mm
24	Chisel - Cold, Cross Cut, 6 mm X 150 mm
25	Chisel - Cold, Half Round, 10 mm X 200 mm
26	Chisel - Cold, Round Nose, 6 mm X 100 mm
27	Chisel - Cold, Round Nose, 9 mm X 100 mm
28	Chisel - Diamond Point, 9 mm X 150 mm
29	Chisel - Firmer, Gouge, Set of 6 with Wooden Handle
30	Chisel - Knife, 50 mm
31	Chisel - Mortise, Set of 4 with Wooden Handle
32	Chisel - Scribing, Gouge, Set of 6 with Wooden Handle
33	Clamp - C, 50 mm
34	Clamp - C, 100 mm
35	Clamp - C, 200 mm
36	Clamp - C, 300 mm
37	Clamp - Parallel, Adjustable, 200 mm (F Clamp)
38	Diamond Wheel Dresser - Single Stone Mounted, 2.0 Carat
39	Hammer - Ball Peen, 200 grams with Handle
40	Hammer - Ball Peen, 500 grams with Handle
41	Hammer - Ball Peen, 800 grams with Handle
42	Hammer - Brick Layer, 600 grams with Handle
43	Hammer - Chipping, 250 grams with Handle
44	Hammer - Claw, 340 grams with Handle
45	Hammer - Copper/ Brass, 1000 grams with Handle
46	Hammer - Cross Peen, 500 grams with Handle
47	Hammer - Machinist, 300gm with Handle
48	Hammer - Nylon, 30 mm with Handle
49	Hammer - Round Flat and Cross Pin, 320 grams with Handle
50	Hammer - Sledge, 1800 grams with Handle
51	Hammer - Sledge, 6000 grams with Handle
52	Hammer - Wooden Mallet
53	Brush Steel Wire - 150 X 50 mm
54	Center Square - Size 400 X 250 mm Blade
55	Dog Carrier - Straight & Bent Tail, 50 mm
56	Oil Stone - 150 mm X 50 mm X 25 mm
57	Pickaxe
58	Scriber - Bend and Straight, 150 mm
59	Shovel
60	Spade
61	Square Bevel - 150 mm
62	Stud Extractor - Roller Type for 5 to 20 mm
63	Tong - Flat, 300 mm
64	Washer Cutter
65	Aviation Snips - Left Cut, 250 mm
66	Aviation Snips - Right Cut, 250 mm
67	Aviation Snips - Straight Cut, 250 mm
68	Cable Cutter - 150 mm
69	Crimping Tool - 5 in 1
70	Crimping Tool - RJ 45
71	Pincer - 200 mm
72	Plier - Circlip, External, Bend, 180 mm
73	Plier - Circlip, External, Straight, 200 mm
74	Plier - Circlip, Internal, Bend, 180 mm
75	Plier - Circlip, Internal, Straight, 200 mm
76	Plier - Combination, 200 mm
77	Plier - Flat Nose, 150 mm
78	Plier - Long Nose, 200 mm
79	Plier - Round Nose, 150 mm
80	Plier - Saw Set, 175 mm
81	Plier - Side Cutting, 200 mm
82	Plier - Vice Grip, 250 mm
83	Tube Bending Plier Set
84	Water Pump Plier - 250 mm
85	Wire Cutter and Stripper - 150 mm
86	Plumb Bob - 115 grams
87	Plumb Bob - 200 grams
88	Plumb Bob - 500 grams
89	Pipe Cutter - For Copper Tube, 3 mm to 16 mm
90	Pipe Cutter - Wheel Type, 3mm to 30 mm
91	Pipe Dies and Die Stock Complete Set in Box 1/2\" to 2\"
92	Pipe Flaring Tool Set - Tube Cutter = 1/8 to 1-1/8 inches, Flaring Block = 3/16 through 5/8 inch and Flaring Yoke
93	Composite Pipe Installation Tools Set - Plier, Cutter and Pressing tools
94	Center Punch - 100 mm
95	Hollow Punch Set - 6mm to 16mm, Set of 7
96	Letter and Number Punch - 4 mm
97	Nail Punch - 150 mm
98	Poker - 90 mm
99	Prick Punch - 100 mm
100	Rawl Punch Holder and Bit - 6 mm
101	Rawl Punch Holder and Bit - 8 mm
102	Rawl Punch Holder and Bit - 10 mm
103	Rawl Punch Holder and Bit - 12 mm
104	Rawl Punch Holder and Bit - 14 mm
105	Round Punch - Solid, 3 mm
106	Round Punch - Solid, 4 mm
107	Round Punch - Solid, 6 mm
108	Compass Saw (Nest of Saw) - 250 mm with 3 Blades
109	Cross Cut Saw - 600 mm
110	Electrician’s Knife - 100 mm
111	Fret Saw Frame - 150 mm
112	Glass Cutter - Diamond Point
113	Hacksaw Frame - Adjustable, 250 mm to 300 mm
114	Hacksaw Frame - Deep Cutting, 300 mm
115	Hacksaw Frame - Fixed, 150 mm
116	Hand Saw - 300 mm
117	Hand Saw - 450 mm
118	Marking Knife - 200 mm
119	Rip Saw - 450 mm
120	Tenon Saw - 250 mm
121	Scraper Set - Stainless Steel, 200 mm, Straight Blade=32mm, Straight Blade=50 mm and Angle Blade=32mm
122	Scraper Set - 200 mm, Triangular, Half Round and Flat
123	Neon Tester - 500 V
124	Precision Screw Driver - Set of 6
125	Screw Driver - Bit Set
126	Screw Driver - 10 X 200 mm
127	Screw Driver - 10 X 250 mm
128	Screw Driver - 10 X 300 mm
129	Screw Driver - 10 X 450 mm
130	Screw Driver - 3 X 75 mm
131	Screw Driver - 6 X 100 mm
132	Screw Driver - 8 X 150 mm
133	Screw Driver - 8 X 200 mm
134	Screw Driver - Insulated, 10 X 250 mm
135	Screw Driver - Insulated, 4 X 150 mm
136	Screw Driver - Insulated, 6 X 150 mm
137	Screw Driver - Insulated, 8 X 200 mm
138	Screw Driver - Insulated, 8 X 300 mm
139	Screw Driver - Philips, Set of 5
140	Screw Driver - Set of 7
141	Screw Extractor Set - Set of 5
142	Chain Pipe Wrench - 90 mm to 650 mm
143	Spanner - Adjustable, 150 mm
144	Spanner - Adjustable, 300 mm
145	Spanner Set - Box Type, 6 mm to 32 mm, Set of 12
146	Spanner Set - Double Ended, 6 mm to 22 mm, Set of 8
147	Spanner Set - Double Ended, 6 mm to 32 mm, Set of 12
148	Spanner Set - Pin, Set of 4
149	Spanner Set - Ring, 6 mm to 32 mm, Set of 12
150	Spanner Set - Spark Plug, Set of 5
151	Stillson Pattern Pipe Wrenches - Length = 300 mm, Opening = 42 mm
152	Torque Wrenches - Range 5 Nm to 200 Nm Set of 3,
153	Universal Pipe Wrenches - 275 mm
154	Universal Puller - 3 Leg, 150 mm
155	Universal Puller - 3 Leg, 200 mm
156	Plumb Level - 1000 mm
157	Spirit Level - 300 mm
158	Straight Edge - Steel, 1200 mm
159	Straight Edge - Steel, 600 mm
160	Surface Plate - Cast Iron, 1000 x 1000 mm with Stand and Cover
161	Surface Plate - Cast Iron, 600 x 600 mm with Stand and Cover
162	T Bar Cramp - 0.6 Meter
163	T Bar Cramp - 1.25 Meter
164	T Bar Cramp - 1.75 Meter
165	Trowel - Brick, 11 inch X 5.5 inch
166	Trowel - Brick, 4.5 inch X 1.87 inch
167	Trowel - Brick, 8 inch X 5.5 inch
168	Trowel - Heart, 6 inch
169	Trowel - Heart, 8 inch
170	Trowel - Inside Corner, 6 Inch, 90 Degree Angle
171	Trowel - Outside Corner, 6 Inch, 90 Degree Angle
172	Trowel - Plastering, 13 inch X 5 inch
173	Trowel - Plastering, 8 inch X 5 inch
174	Trowel - Pointing, 6 inch
175	Trowel - Tile, 11 inch X 4 inch, Notch = 10 mm X 10 mm
176	Pinching Tool
177	Tweezers - 100 mm, Straight Tip
178	Tweezers - 100 mm, Bend Tip
179	File - Cant Saw, Smooth, 150 mm with Handle
180	File - Car Body, Bastard Cut without Tang, 300 mm with Handle
181	File - Dread Naught, Bastard, 300 mm with Handle
182	File - Flat, Aluminium, 200 mm with Handle
183	File - Flat, Aluminium, 300 mm with Handle
184	File - Flat, Bastard, 150 mm with Handle
185	File - Flat, Bastard, 200 mm with Handle
186	File - Flat, Bastard, 250 mm with Handle
187	File - Flat, Bastard, 300 mm with Handle
188	File - Flat, Bastard, 350 mm with Handle
189	File - Flat, Second Cut, 150 mm with Handle
190	File - Flat, Second Cut, 200 mm with Handle
191	File - Flat, Second Cut, 250 mm with Handle
192	File - Flat, Smooth, 150 mm with Handle
193	File - Flat, Smooth, 200 mm with Handle
194	File - Flat, Smooth, 250 mm with Handle
195	File - Half Round, Bastard, 150 mm with Handle
196	File - Half Round, Bastard, 200 mm with Handle
197	File - Half Round, Bastard, 250 mm with Handle
198	File - Half Round, Bastard Rasp Cut, 250 mm with Handle
199	File - Half Round, Second Cut, 150 mm with Handle
200	File - Half Round, Second Cut, 200 mm with Handle
201	File - Half Round, Second Cut, 250 mm with Handle
202	File - Half Round, Smooth, 150 mm with Handle
203	File - Half Round, Smooth, 200 mm with Handle
204	File - Half Round, Smooth, 250 mm with Handle
205	File - Knife Edge, 150 mm with Handle
206	File - Round, Bastard, 150 mm with Handle
207	File - Round, Bastard, 200 mm with Handle
208	File - Round, Bastard, 250 mm with Handle
209	File - Round, Second Cut, 150 mm with Handle
210	File - Round, Second Cut, 200 mm with Handle
211	File - Round, Second Cut, 250 mm with Handle
212	File - Round, Smooth, 150 mm with Handle
213	File - Round, Smooth, 200 mm with Handle
214	File - Round, Smooth, 250 mm with Handle
215	File - Safe Edge Hand, Second Cut, 200 mm with Handle
216	File - Safe Edge Hand, Second Cut, 250 mm with Handle
217	File - Slim Taper, 100 mm with Handle
218	File - Slim Taper, 150 mm with Handle
219	File - Square, Bastard, 150 mm with Handle
220	File - Square, Bastard, 200 mm with Handle
221	File - Square, Bastard, 250 mm with Handle
222	File - Square, Second Cut, 150 mm with Handle
223	File - Square, Second Cut, 200 mm with Handle
224	File - Square, Second Cut, 250 mm with Handle
225	File - Square, Smooth, 150 mm with Handle
226	File - Square, Smooth, 200 mm with Handle
227	File - Square, Smooth, 250 mm with Handle
228	File - Triangular, Bastard, 150 mm with Handle
229	File - Triangular, Bastard, 200 mm with Handle
230	File - Triangular, Bastard, 250 mm with Handle
231	File - Triangular, Second Cut, 150 mm with Handle
232	File - Triangular, Second Cut, 200 mm with Handle
233	File - Triangular, Second Cut, 250 mm with Handle
234	File - Triangular, Smooth, 150 mm with Handle
235	File - Triangular, Smooth, 200 mm with Handle
236	File - Triangular, Smooth, 250 mm with Handle
237	File - Warding, Smooth, 150 mm with Handle
238	File Set - Needle, 160 mm, Set of 12
239	File Set - Needle, 160 mm, Set of 6 with Soft Grip
240	File Set - Bastard, 150 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
241	File Set - Bastard, 200 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
242	File Set - Bastard, 250 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
243	File Set - Second Cut, 150 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
244	File Set - Second Cut, 200 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
245	File Set - Second Cut, 250 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
246	File Set - Smooth, 150 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
247	File Set - Smooth, 200 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
248	File Set - Smooth, 250 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)
249	Key File Set - General Purpose, 100 mm, Set of 6 with Wooden Grip
250	File Set - Mechanic Motor Vehicle, Set of 20

Also Visit

Tenders

Maharashtra Tenders

Vehicles and Accessories Tenders

Railway Machinery Tenders

Railway Ancillaries Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Supply And Installation Of Workshop Tools, Mumbai-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Supply And Installation Of Workshop Tools, Mumbai-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us