Miscellaneous Petty Works At Kvk, Anta - Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. Repairs To Plaster Of Thickness 12Mm To 20Mm , Kota-Rajasthan

Miscellaneous Petty Works At Kvk, Anta - Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1:4 (1) cement: 4 coarse sand) Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work Old Work Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: One or more coats on old work. Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. Old work (One or more couts) Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20s3mm with suitable screw at not exceeding 150mm distance. Providing and fixing aluminum work for doors windows, ventilators and partition with extruded built up standard tubular/ appropriate 2 sections and other sections of approved make conforming to 15 :733 and 15:1285, fixed with rawi plugs and screws or with fixing clips or with expansion hoid fasteners including necessary filling up of gap, at junctions, at top bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free, straight mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling, C.P. brass stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer- in- charge (Glazing and paneling to be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to 15: 1868. (Minimum anodic coating of grade AC 15. Anodizing to be got done from approved Anodizer) For shutters builtup standard tubular sections of openable doors windows & ventilators including providing & fixing hinges/rollers etc. and making provision for tixing of fittings wherever required (lockes shall be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according to IS: 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) Providing and fixing glazing in aluminium door, window ventilator shutters and partitions etc. with PVS/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item. With glass panes of 4.0 mm thickness (weight not less than 10.0 kg/sqm) as per IS: 2835.

Refer document

Refer document

INR 2.74 Lakhs /-