Tender For Various Works Under Green Lungs Scheme At Shyampura Forest Area, Range Banswara - Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of usefulmaterial if available: Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm, thick walls in: Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing: Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Suspended floors, roofs, landings, staircase, balconies, girders, cantilevers, bands, copingbed plates, anchor blockes, sills, chhajjas, lintel, beams etc. Pointing on stone masonry in cement sand mortar 1:3 (1 cement: 3 sand): Raised and cut pointing Random rubble dry stone Kharanja under floor. Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc complete fine finish: Construction of Male and Female Toilet at Entrance Gate Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of Centering and shuttering-All work up to plinth Level: Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortar 1:6 (1 cement: 6 coarse sand) Add extra over item no. 5.1 for Brick work in super structure upto third storey using brick of class designation 75 in. Brick work in partition in super structure upto third storey 7 cm thick (bick on edge) using brick of class designation 75 in. Random rubble dry stone Kharanja under floor. Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work up to plinth Level: Suspended floors, roofs, landings, staircase, balconies, girders, cantilevers, bands, copingbed plates, anchor blockes, sills, chhajjas, lintel, beans etc. providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls, returnwall, Wall (any thickness) including attached pilasters, column,piers, abutments, pillers, posts, buttresses string Course parapet coping bed plates, anchor blockes, sills, fillets up to floor three level excluding the cost of centreing and shuttering. M 20 grade mix Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Providing and fixing Ist quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to 15 13753 & 15:15622 of size 300mm x 600mm in walls, floors, steps, pillars etc, laid on a bed of neat cement slurry finished with flush pointing in the white cement mised with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to 15: 13755 and IS: 15622 colour such as white, grey, Ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mibied with pigment to match the shade of the tile complete (including the cost of cement mortar bed Polished Blue Kota stone flooring skirthing laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete. Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and Joined with 2 Nos. of 150mm long brackets of 15x15mm M.S square tube, the vertical door profiles to be reinforced with 19x19mm M.5. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge 30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.5 frame shall have a coat of steel primers of approved make and manufacture M.5. frame covered with 5mm thick heat moulded PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mmx 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending an inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufactures specification & drawing (For W.C.and bathroom door shutter). Supplying & fixing fixed wige gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance. Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etz complete fine finish: Finishing with neat cement (punning) Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding New work (Two or more cost applied @ 1.67 Itr/10 sqm aver and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm). Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including allscaffolding: Painting with emamel paint of approved brand and manufacture and to give an even shade Two or more costs in new work including prepration of buse with primer putty lippy complete in all respect Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead upto 50 mts and with all lift. Sanitary amount 95% of civil work Electrical amount 4% of civil work
