Tender For Up Gradation Of Pacs Hakripora- 1 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the materialwithin 50 meters lead of :G.S. Sheet 2 Dismantling old fixed rolling shutters from site of work and its carrige upto departmental store all completeas per directions of EIC 3 Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead of sectional area 40 sqcm. and above. 4 Demolishing cement concrete manually/by mechanical means includingdisposal of materialas per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) 5 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry, but excluding the cost of noising of steps etc. complete. 50mm thick 20 mm nominal size stone aggregate Including carriage of all materials involved with loading unloading and stacking complete. 6 Providing ridges or hips of width 60cm overall width plain G.S. sheetsfixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2 7 Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 8 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 9 Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping groundas directed by EIC With cement mortar 1:4 (1 cement : 4 coarse sand) 10 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 11 Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) 12 Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing andfixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. topcover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover 13 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture. 14 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded with carriage of all materials involved 15 Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in super structure inCement mortar 1:6 ( cement : 6 Fine Sand) Including carriage of all materials involved with loading unloading and stacking complete. (Bricks from Pampore) 16 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) with carriage of all materials involved . 17 Providing and layingReinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level including carriage of all materials involved with loading unloading and stacking complete. 18 Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs landings, balconies and acess platform. 19 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and centilevers. 20 Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. 21 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) with carriage of all materials involved . 22 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,All kinds of soil : 23 Providing and laying of stone soiling dully hand packed including carriage of stone soling with loading unloading and stacking complete. 24 Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto plinth level 1:4:8 (1cement: 4fine sand: 8 graded stone aggregate 40mm nominal size)(Crushed). Including carriage of all materials involved with loading unloading and stacking complete. 25 Providing and laying in position cement concrete of specified grade excl. the cost of centering and shutering. All work upto requiredlevel 1:3:6 (1cement: 3 fine sand: 6 graded stone aggregate 20mm nominal size)(Crushed). Including carriage of all materials involved with loading unloading and stacking complete. 26 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish with all leads and lifts carriage completein -All kinds of soil. 27 carrige of dismatled wood from site to departmental store 10 km lead 28 carriage of desmatled CGI sheets from stite to departmental store 10 km lead
