|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed. |
| 2 | M&L for Brickwork with sub class \"B\" bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed. |
| 3 | All as per item No 02 above but except bricks |
| 4 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4), complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 6 | M & L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement), complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick cement plaster in cement mortar (1:4) onof brick work or concrete surfacefinish ever and smooth (w/o using extra cement) incl WPC as per user manual, complete all as specified and directed. |
| 8 | M&L for rendering 10mm thick cement plaster in cement mortar (1:3) over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces, finish even and smooth without using extra cement, complete all as specified and directed. |
| 9 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon wall over one coat of primer incl one layer of 3mm thick wall care putty onnew plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed. |
| 10 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon ceiling over one coat of primerincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 11 | M & L for preparation of new plastered wall surfaces and apply two coats of cement based paint over a coat alkali primer resistanceincl one layer of 3mm thick wall careputty onnew plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed. |
| 12 | M&L fortwo coat ofAcrylic smooth exterior emulsion paint over one coat of acrylic primer incl one layer of 3mm thick wall careputty on new plastered surfaces of wall and obtain smooth finish using sand paper complete all as specified and directed.Note : Colour and make as approved by GE. |
| 13 | M&L fortwo coat ofAcrylic smooth exterior emulsion paint over one coat of acrylic primer incl one layer of 3mm thick wall careputty for exterior/interior on old scraped wall surfaces and obtain smooth finish using sand paper complete all as specified and directed.Note : Colour and make as approved by GE. |
| 14 | M&L fortwo coat ofAcrylic smooth exterior emulsion paint over one coat of acrylic primer incl one layer of 3mm thick wall careputty for exterior/interior on old scraped ceiling surfaces and obtain smooth finish using sand paper, complete all as specified and directed.Note : Colour and make as approved by GE. |
| 15 | M&L forone coat ofAcrylic smooth exterior emulsion paint over one coat of acrylic primer incl one layer of 3mm thick wall care putty for exterior/interior on old scraped wall surfaces and obtain smooth finish using sand paper complete all as specified and directed.Note : Colour and make as approved by GE. |
| 16 | M&L forone coat ofAcrylic smooth exterior emulsion paint over one coat of acrylic primer incl one layer of 3mm thick wall careputty for exterior/interior on old scraped ceiling surfaces and obtain smooth finish using sand paper complete all as specified and directed.Note : Colour and make as approved by GE. |
| 17 | M&L forpreparation of old surfaces by removal of existing treatment and applying two coats of oil emulsion distemper over a coat of primer on surface of walls incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on ceiling over one coat of primerincl one layer of 3mm thick wall careputty on old scraped surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 19 | M&L forpreparation of old surfaces by removal of existing treatment and applying one coat of oil emulsion distemper over a coat of primer on surface of walls incl one layer of 3mm thick wall careputty on old scraped surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 20 | M&L for preparation of old surfaces by removal of existing treatment and applying one coat of distemper oil emulsion on ceiling over one coat of primerincl one layer of 3mm thick wall careputty on old scraped surfacesand obtain smooth finish using sand paper complete all as specified and directed. |
| 21 | M & L for preparation of old wall surfaces by removal of existing treatmentand apply two coats of cement based paint over a coat alkali primer resistanceincl one layer of 3mm thick wall careputty on old scraped surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 22 | M & L for preparation of old surfaces by removal of existing treatmentand apply one coat of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall careputty on old scraped surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 23 | M&L forpreparation of old surfaces by removal of existing treatment and applying two coats of white wash on surface of walls complete all as specified and directed. |
| 24 | M&L forpreparation of old surfaces by removal of existing treatment and applying two coats of white wash on surface of ceiling complete all as specified and directed. |
| 25 | M&L forpreparation of old surfaces by removal of existing treatment and applying one coat of white wash on surface of walls, complete all as specified and directed. |
| 26 | M&L forpreparation of old surfaces by removal of existing treatmen and applying one coat of white wash on surface of ceiling complete all as specified and directed. |
| 27 | M&L for coral wall texture paint flasks type consisting of fiber natural gem, semi-precious pigmented granules, pearl and spary texture of high resistance, fire proof polymer alkali resistance, anti-corrosion and anti-condensation with natural stone, lime stone quartz etc. that given a scam less wall surface without joints, reples water ultra violet rays from sunlight including removing of, alage and fungus applied on wall or ceiling with trowel and roller complete all as specified and directed . |
| 28 | M&L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm, complete all as specified and directed. |
| 29 | M&L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth n. exc 10cm complete all as specified and directed. |
| 30 | M&Lfor one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on new surfaces and obtain smooth finish using sand paper complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling over one coat of primer, complete all as specified and directed. |
| 33 | M&L for preparation of old surfaces by removal of existing treatment and applying three coats of white wash on ceiling over one coat of primer, complete all as specified and directed. |
| 34 | M&L forpreparation of new plastered surface and applying on walls/ceiling and applying two coat of plastic emultionpaint and applying one coat of wall care puttyfor complete smooth surfce complete all as specified and directed. |
| 35 | M&L for preparation of new surfaces on wall surfaces obtain smooth finish using sand paperand apply on wall etc and applying two coats of plastic emulsion paint over a coat of acrylic primer incl 3mm thick of wall care putty for with complet smooth surface as per manufactures instruction complete all as specified and directed. |
| 36 | M&L for preparation of old surfaces on wall surfaces obtain smooth finish using sand paper incl complete removal of existing treatment and apply on wall etc and applying two coats of plastic emulsion paint over a coat of acrylic primer incl 3mm thick of wall care putty for with complet smooth surface as per manufactures instruction complete all as specified and directed. |
| 37 | M&L for preparation of New surfaces on wall surfaces obtain smooth finish using sand paperand apply on wall by comp, roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction complete all as specified and directed. |
| 38 | M&L for preparation of old surfaces on wall surfaces obtain smooth finish using sand paper incl complete removal of existing treatment and apply on wall by comp, roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction complete all as specified and directed. |
| 39 | M&L for preparation of new plastered surface on ceiling,roof boarder, drops, fins, chajja / roof facia, columnsurface obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction , complete all as specified and directed |
| 40 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade \"A\" in on concrete slab 100mm, complete all as specified and directed. |
| 41 | M&L for Plain Aluminium sheeting, 0.56 mm thick, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length andgirth as fixed), complete all as specified and directed. |
| 42 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed. |
| 43 | M&L for non skid ceramic coloured tiles, joint free, 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.18 Sqm but not exc 0.38 sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles over15 mm thick bedding layer screed bed in cement mortar (1:6) in floors etc, complete all as specified and directed.Note : Shade & design as approved by GE. |
| 44 | M&L for Glazed ceramic coloured tiles, joint free, in vertical surfaces of size 350x250x7/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles including 10mm thick rendering in cement mortar (1:4) as backing of wall tiles such as dado/skirting in vertical surface etc, complete all as specified and directed. Note : Shade & design as approved by GE. |
| 45 | M&L for Double charged/HD fully vitrified tiles, 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqmin floors, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed in cement mortar (1:4) for laying floor finishes, complete all as specified and directed .Note : Shade & design as approved by GE. |
| 46 | M&L for Fully Virified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqmbut n exc 0.42 sqm, in floors, dado, skirtingetc, set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes and pointed in white or coloured cement to match and incl dismantling/demolition and rubbish off the primises etc, complete all as specified and directed. |
| 47 | M&L for Outdoor Fully Virified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm , in floors, dado , skirtingetc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes and pointed in white or coloured cement to match and incl dismantling/demolition and rubbish off the primises etc, complete all as specified and directed. |
| 48 | M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) with mirror polishing of any size as directed by Engineer-in-charge, laid over and incl 20mm thick bedding layer in cement mortar (1:6) over 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base,jointed and pointed in grey cement mixed with pigmentto match the shade of slabincludingrubbing and polishing to achieve mirror finish, complete all as specified and directed. |
| 49 | M&L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in cement mortar (1:6) bedded and jointed in neat cement slurry, incl dismantling, complete all as specified and directed. |
| 50 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick cement mortar (1:3) jointed and pointed in grey cement mixed with pigmentto match the shade of slabincludingrubbing and polishing to achieve mirror finish, complete all as specified and directed. |
| 51 | M&L for Granite 18-20mm thick (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding, rounding of edgeing and dismantling, complete all as specified and directed. |
| 52 | M&L for Mirror polishing on marble/granite/Kota stone/stone work, where ever required to give high gloss finish, complete all as specified and directed. |
| 53 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and complete all as specified and directed. |
| 54 | M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheetreinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and complete all as specified and directed. |
| 55 | S&F Pressed steel frame of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type C-0,(1:3:6 ) using 12.5mm graded stone aggregate etc complete all as specified and directed. |
| 56 | S&F Pressed steel frame of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type C-0,(1:3:6) using 12.5mm graded stone aggregate etc complete all as specified and directed. |
| 57 | S&F of 35 mm thick (Batten thickness) 2nd class hardwoodglazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats, complete all as specified and directed. |
| 58 | S&Fstainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed. |
| 59 | S&F in repair for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed. |
| 60 | S&F 35 mm thickflush shutters, solid core construction, with particleboard core and plywood face panels, veneered type on both sides face is covered with any type colour decorative face with lipping/frame to match complete all as specified and directed. |
| 61 | S&F for Factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2 mm thickprelam PVC sheet on back side, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 62 | M&L for aluminium anodizedpowder coated(Min thickness of powder coating 50 micron) fixed frame of partiton or fixed window / ventilator, aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality \"frosted\" glass or ACP sheet joining with rubber beading , aluminium snap beading, complete all as specified and directed. |
| 63 | S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples, complete all as specified and directed. |
| 64 | M&L for 4.8 mm thick float glass ordinary quality frosted glass and glazing with aluminum beading and gasket to aluminum frameworkin squareexc 0.50 sqm ineach pane in repair, complete all as specified and directed. |
| 65 | Easing and Adjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete all as specified and directed by Engineer-in-Charge.Notes : Door closer, door spring, aluminium beading, gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules. |
| 66 | S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed. |
| 67 | S&Faluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 68 | S&F of Mortice lock 75mmvertical type 2 lever etc complete all as specified and as directedetc complete all as specified and directed. |
| 69 | S&F of Neoprene/EPDMRubber gasket for fixing aluminium door and window shutters etc complete all as specified and directed. |
| 70 | S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and directed. |
| 71 | S&F 150 mm long aluminium tower bolts for aluminium door and window shutter etc, complete all as specified and directed. |
| 72 | S&F 150 mm long, aluminium handlefor aluminium door and window shutteretc complete all as specified and directed. |
| 73 | S&F 100mm long, aluminium handle for aluminium door and window shutteretc, complete all as specified and directed. |
| 74 | S & F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqmquality or description from steel frame and complete all as specified and directed. |
| 75 | S&F 10 to 12 mm thick frosted glass door with 08 Nos of holes and two steel hinges and steel handles not less than 300 mm long on both sides of door, incl necessary locking arrangement, complete all as specified and directed. |
| 76 | S&F in repair 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves,etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges complete all as specified and directed. |
| 77 | S&F for 30 mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 78 | S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified and directed. |
| 79 | S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 80 | S&F in repair for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long(ISI Marked) complete all as specified and directed. |
| 81 | S&F for aluminum anodized barrel tower bolts of extruded section 150mm long(ISI Marked) complete all as specified and directed. |
| 82 | S&F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, 300mm long complete all as specified and directed. |
| 83 | S&F for Extruded brass handles, fabricated type polished 150 mm long complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F in repair of one piece closet with bowl for coupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x640x680 mm, S-Trap 220 mm with syphonic flushing cistern with necessary fittings complete all as specified and directed. |
| 85 | S&F in repair wash hand basin, table top, of size 600x400x175 mmvitrous China including, waste coupling & PVC waste pipe of 32 mm dia etc complete all as specified and directed. |
| 86 | S&Fin repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 87 | S&F in repair Bib tap, Chromium plated, fancy type, long body, 15 mm bore withcrutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings, complete all as specified and directed. |
| 88 | S&F in repair Stop cock /angle, Chromium plated, fancy type, 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions, complete all as specified and directed. |
| 89 | S&F in repair 15mm bore, wall mixturer, 3 in 1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flanges (Without hand & overhead shower),complete all as specified and directed. |
| 90 | S&F in repairCP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed. |
| 91 | S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube ofcomplete all as specified and directed. |
| 92 | S&F in repair for cabinet PTMT of size 400mm x 500 mmwith megnetic looking arrangements fixed with and including chromium plated brass screws and PVC rawl plugs, complete all as specified and directed. |
| 93 | S&F in repair for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints complete all as specified and directed. |
| 94 | S&F in repair for vitreous china, sensor urinal, of size 485x300x740 mm, complete all as specified and directed. |
| 95 | S&F for 8 mm thick toughend frosted glass urinal partitionsincluding all necessary stainless steel fitting etc complete all as specified and directed. |
| 96 | S&F in repair for Soap tray, brass, chromium plated and fixed to plugs on wall with brass screws complete all as specified and directed. |
| 97 | S&F in repair for Towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 98 | S&F in repair for Towel ring, brass, chromium plated, fixed with brass screws and plugs complete all as specified and directed. |
| 99 | S&F in repair for PVC connection of length 45/60cm long, superior quality, with PTMT nut on both side, complete all as specified and directed. |
| 100 | S&F in repair grating, round, 100 mm size, of chromium plated, complete all as specified and directed. |
| 101 | S&F for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with \"P\" or \"S\" trap front or back inlet and integral foot rest (excluding flushing cistern and flush pipe) fixed in repair including Lean concrete bedding as requiredto set, complete all as specified and directed. |
| 102 | S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. |
| 103 | S&F in repair for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.. |
| 104 | S&F in repair for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 105 | S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sqcmlength \"medium grade\" with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings, complete all as specified and directed. |
| 106 | All as per item No 105 above but laid in trench or in floor. |
| 107 | S&F for 75 mm bore PVC bends/junctionany radius complete all as specified and directed. |
| 108 | Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level, concrete debris and rubbish to a distance n exc 100m, complete all as specified and directed. |
| 109 | M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate ) as in plinth protection / path/ any paved area, complete all as specified and directed. |
| 110 | S&F in repair for Soulwood WPC Exterior wall panelling size (2900x219x26) mm any colour/design approved by Engr-in-charge,inclusive of fixing on to wall incl L- Corner, moulding end caps and necessary frame work for fixedand screws as requiredat site, complete all as specified and directed. |
| 111 | S&F double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 112 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed. |
| 113 | M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) of approved design/pattern toflat surfaces incl all necessary MS frame work, 12 mm thick board and fittings as per standard practice and as per manufacturer\"s instructions, reinforced with GI wire mesh, complete all as specified and directed . |
| 114 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris complete all as specified and directed. |
| 115 | M&L for 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone agg. ) as in plinth protection / path/ any paved area complete all as specified and directed. |
| 116 | M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 117 | M&L for Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60mm thickness,M-35 Gde with grey cement and pigment, over specified thikcness of sand cushioning,complete all as specified and directed.Note:- Sand cushioning shall be measured and paid separately. |
| 118 | All as per item No 117 above but except tiles. |
| 119 | M&L for Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 80mm thickness,M-40 Gde with grey cement and pigment, over specified thickness of sand cushioning,complete all as specified and directed.Note:- Sand cushioning shall be measured and paid separately. |
| 120 | M&L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. |
| 121 | M&L for chequered tile of size 300 x 300 x 25 mm thick (colour and glazed approved by GE) with grey cement and pigments laid over 15 mm thick screed bed in cement mortar (1:6) bedded and jointed in neat cement slurry, incl dismantling, complete all as specified and directed. |
| 122 | M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying offloor/sub base finishes, complete all as specified and directed. |
| 123 | Cleaning/Removal of blockage 150 mm bore SWG pipes of depth not exc 1.50 mtr with mechnical processincl removing of RCC manhole coversand refixing the same as before, complete all as specified and directed. |
| 124 | Cleaning/Removal of blockage 150 mm bore SWG pipes of depthexc 1.50 mtr but not exc 3.00 mtr withmechnical process incl removing RCC manhole coversand refixing the same as before, complete all as specified and directed. |
| 125 | Dewatering/desilting of existing manholes of any size & depth and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system or using suction pump where ever required up to any depth ) and incl removing RCC manhole covers and refixing the same after making the manhole fully functional, complete all as specified and directed. |
| 126 | Dewatering/desilting for the septic tank of any capacity exc1.50 m and n.exc 4.5 m deep, solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system or using suction pump where ever required up to any depth by working under foul conditions and disposal of the same in out of MoD area complete all as specified and directed. |
| 127 | Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft or loose soil for shafts, wells,drains, manholes etc n exc 10Sqm on plan for sewage line & foundation etc, complete all as specified and directed. |
| 128 | All as per item No 127 but exceeding 1.5 M depth and not exceeding 3 M for foundation, etc, and getting out in Soft/ Loose soil. |
| 129 | All as per item No 127 but exceeding 3.0 M depth and not exceeding 4.50M for foundation, etc, and getting out in Soft/ Loose soil. |
| 130 | Demolition and breaking up drain pipes 100mm dia ( PVC/Salt Glazed stoneware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MD land complete all as specified and directed. |
| 131 | Demoltion and breaking up existing sewage(SGSW/ AC pipes and the like, 150mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m complete all as specified and directed. |
| 132 | Demoltion and breaking up existing sewage (SGSW / AC pipes and the like, 200mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m complete all as specified and directed. |
| 133 | S&F 110 mmPVC (SWR ) , pipes single socketd , in any lengthwith rubber ring joints , laid in trenches or in floorcomplete all as specified and directed by Engineer-in-Charge. |
| 134 | S&F RCC Class NP-3, 150 mm bore pipes laid and jointed complete with collars complete all as specified and directed. |
| 135 | S&F RCC Class NP-3, 200 mm bore pipes laid and jointed complete with collars complete all as specified and directed. |
| 136 | M&L for PCC 1:3:6 type C2 (using 40 mm gradedstone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 110 mm bore complete all as specified and directed. |
| 137 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore, complete all as specified and directed. |
| 138 | M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed. |
| 139 | S&F in repairfor precast factory madereinforced cement concreteManhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet of thickness 1mmmedium duty (size and thickness of the cover will be itimated by the EIC) complete all as specified and directed. |
| 140 | S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165all as specified and directed. |
| 141 | S&F in repair precast factory made polycrete (SFRC) medium duty perforated drain cover 100 mm thick, rectangle in shape upto 01 sqm areaeach with hole for drain,complete all as specified and directed. |
| 142 | Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed. |
| 143 | M&L for Plain cement concrete (1:2:4) Type B-1, (using 20mm graded stone aggregate), as incopings, kneelers , apex stones,bed plates, including weathering ,slightly rounded /benching or chamfered angles and throating complete all as specified and directed.Note:-Rates include for use of formwork |
| 144 | Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 100mm dia pipe complete all as specified and directed. |
| 145 | Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 150mm dia pipe complete all as specified and directed. |
| 146 | Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 200mm dia pipe complete all as specified and directed. |
| 147 | M&L for Salt glazed stoneware gully trap, square or round moulded type \"P\", 150x150mm size complete all as specified and directed. |
| 148 | M&L for Plain cement concrete 1:3:6 type C2 (using 20 mm gradedstone aggregate) as in surface channels, drains and bed of manhole complete all as specified and directed. |
| 149 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed. |
| 150 | M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete, complete all as specified and directed. |
| 151 | M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage well etc, complete all as specified and directed. |
| 152 | M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage well etc, complete all as specified and directed. |
| 153 | S&F for 100mm bore Cast iron soil, waste and vent pipes, in any lengthwith or without ears, with cement joints, fixed to walls etcincl taking down old pipe, complete all as specified and directed. |
| 154 | S&F for 75mm bore Cast iron soil, waste and vent pipes, in any lengthwith or without ears, with cement joints, fixed to walls etc complete incl taking down old pipe, complete all as specified and directed. |
| 155 | S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 156 | S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.. |
| 157 | S&F for 100mmbranch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc complete all as specified and directed by Engineer-in-Charge. |
| 158 | S&F for 75mmbranch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc, complete all as specified and directed. |
| 159 | S&F for 75 Cast Iron Vent Cowl, complete all as specified and directed. |
| 160 | S&F for 100 Cast Iron Vent Cowl, complete all as specified and directed. |
| 161 | S&F for 75mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate, complete all as specified and directed. |
| 162 | S&F for 100mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate, complete all as specified and directed. |
| 163 | S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cmlength \"medium grade \" with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings, complete all as specified and directed. |
| 164 | All as per item No 163 above but laid in trench or in floor |
| 165 | S&F for 110mm bore PVC bends/junctionany radius complete all as specified and directed by Engineer-in-Charge. |
| 166 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works complete all as specified and directed. |
| 167 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.Note : Reinforcement shall be measured and paid for separately under respective item. |
| 168 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 169 | Removing daberies/excavated material to a distance exceeding 1.5KM butnot exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed. |
