|
| 1 | \"Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285-1975; Annodized(with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed /certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).\"(A) In 10-12 Micron thickness Annodizing filmII) Colourede) Casement window ( 40 mm Depth series)i) Outer frame. |
| 2 | ii) Mullion. |
| 3 | iii) Shutter |
| 4 | iv) Glazing clip. |
| 5 | v) Cleat angle. (Non-annodized) |
| 6 | g) Fixed glazing.(i) Top, bottom & side member. |
| 7 | ii) Mullion. |
| 8 | (iii) Glazing clip. |
| 9 | i) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 Sq.m)i) Top , bottom & side member. |
| 10 | iii) Glazing clip. |
| 11 | \"Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.\"ii) For openable / Casement windowsa) EPDM / weather gasket for outer frame and mullion. |
| 12 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.vi) 6mm thick coloured / tinted / smoke glass. |
| 13 | \"xiv) 12mm thick coloured / tinted / toughened glass coforming to IS:2553-1992 (Part-II)\" |
| 14 | Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub-frame as per direction of Engineer-in-charge for Structural Glazing / Curtain wall etc. Glazing Silicon for fixing Glass on Sub frame |
| 15 | Labour charge for fabrication and installation of composite door, window , partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sections, fabrications, including cutting toproper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frameand masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Poly Shulphatesealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleate angle etc.but excludes the cost of extruded aluminium sections, glass, neoprene / EPDM gasketing, locking arrangement and rollers.iii ) Openable / Casement window. |
| 16 | (iv) Fixed glazzing.groung floor |
| 17 | \"Filling the gap in between aluminium frame & adjacent RCC / Brick / Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width\"(a) Ground Floor |
| 18 | Supplying fitting and fixing 4mm thick acrylic ornamental finger plate made of transparent acrylic sheet including providing holes of knobs and keys as per existing shutter and chamfering the edges of the acrylic sheet. |
| 19 | A. Exposed False-ceiling Work --(c) Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement designer ceiling board (Density > 1300Kg perCu.m. ) of size 595mm X 595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested as per AS-1530 Part 3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in Charge.False ceiling with(ii) 6mm thick Fibre Cement Designer ceiling board. |
| 20 | Add @ 9 % CGST ON 15,64,520.16 |
| 21 | Add @ 9 % SGST ON 15,64,520.16 |
| 22 | Add @ 1 % CESS ON 15,64,520.16 |
